key: cord-0001844-uazbc26u
authors: Hao, Jia; Zhang, Yingyue; Wang, Xingrui; Yan, Huo; Liu, Erwei; Gao, Xiumei
title: Interaction between the Natural Components in Danhong Injection (DHI) with Serum Albumin (SA) and the Influence of the Coexisting Multi-Components on the SaB-BSA Binding System: Fluorescence and Molecular Docking Studies
date: 2015-06-02
journal: PLoS One
DOI: 10.1371/journal.pone.0128919
sha: dd4a3353ae21a249a81f30e23fc416a1d948887b
doc_id: 1844
cord_uid: uazbc26u

Danhong injection (DHI) is a widely used Chinese Materia Medica standardized product for the clinical treatment of ischemic encephalopathy and coronary heart disease. The bindings of eight natural components in DHI between bovine serum albumin (BSA) were studied by fluorescence spectroscopy technology and molecular docking. According to the results, the quenching process of salvianolic acid B and hydroxysafflor yellow A was a static quenching procedure through the analysis of quenching data by the Stern-Volmer equation, the modified Stern-Volmer equation, and the modified Scatchard equation. Meanwhile, syringin (Syr) enhanced the fluorescence of BSA, and the data were analyzed using the Lineweaver-Burk equation. Molecular docking suggested that all of these natural components bind to serum albumin at the site I location. Further competitive experiments of SaB confirmed the result of molecular docking studies duo to the displacement of warfarin by SaB. Base on these studies, we selected SaB as a research target because it presented the strongest binding ability to BSA and investigated the influence of the multi-components coexisting in DHI on the interaction between the components of the SaB-BSA binding system. The participation of these natural components in DHI affected the interaction between the components of the SaB-BSA system. Therefore, when DHI is used in mammals, SaB is released from serum albumin more quickly than it is used alone. This work would provide a new experiment basis for revealing the scientific principle of compatibility for Traditional Chinese Medicine.

In this paper, the binding between these active components and BSA was subsequently investigated by a fluorescence technique. The binding parameters K a , K b , K sv , K q and n were thus determined. The molecular docking between these components and BSA/HSA were discussed using AutoDock Vina software to identify the binding site of each compound. Moreover, we explored the influence of the multi-components coexisting in DHI on the interaction of single component with BSA.

Bovine serum albumin (BSA) was obtained from Solarbio China and was used without further purification. Salvianolic acid B (SaB), adenosine (Ade), cytidine (Cyt), uridine (Uri), phenylalanine (Phe), warfarin (War), and ibuprofen (Ibu) were obtained from the National Institute for Food and Drug Control (Beijing, China). Hydroxysafflor yellow A (HSYA), syringin (Syr) and danshensu (DSS) were purchased from Zhongxin Innova Laboratories (Tianjin, China). The SaB-free DHI sample was obtained from WuXi AppTec (Tianjin) Co., Ltd. All of the other chemicals were used as supplied without further purification.

BSA stock solution (0.1 mM) was prepared in a physiological aqueous solution with 100 mM phosphate buffer, pH 7.2. The stock solution of warfarin (10 mM) was prepared in methanol. The preparation of ibuprofen and the tested components stock solutions (0.1 mM) were similar with BSA stock solution. All of the stock solutions were kept at 4°C in the dark.

All of the fluorometric experiments were recorded on a multifunctional microplate reader (Perkin-Elmer Corporation USA). The stock solutions of BSA and the tested components were diluted to the required experimental sample concentrations and mixed in multiple colorimetric tubes. For SaB and SYR, the range of concentrations was 0, 2.5, 5, 10, 15, 20, 25, 30, 35, 40 μM  from 1 to 10; for HSYR, the range of concentrations was 0, 25, 50, 60, 70, 80, 90, 100 μM from  1 to 8; for DSS, CYT, URI, ADE, and Phe, the range of concentrations was 0, 20, 40, 50, 60, 70 , 90, 100 μM from 1 to 8. The test solutions for fluorescence spectroscopy were prepared with different concentrations via stepwise dilution. To avoid the inner filter effect, we used very dilute solutions in the experiment, ensuring a final concentration of BSA of 5 μM. The test solutions were incubated at 310 K for 40 min and then transferred into 96-well black fluoromicroplates (CORNING, USA); the fluorescence spectroscopy tests were carried out at the same temperature to simulate the body temperature. The excitation wavelength was 280 nm, and the emission spectra were recorded from 300 to 500 nm. The maximum emission intensities were used to calculate binding parameters. In order to correct the background, appropriate blanks were subtracted according to series preliminary experiment.

The three-dimensional (3D) crystal structures of BSA (entry code 4JK4) [28] and HSA in complex with warfarin (entry code 1H9Z) [29] and with ibuprofen (entry code 2BXG) [30] were obtained from the Protein Data Bank (PDB). The two dimensional (2D) structures of tested components were drawn using ChemBioDraw Ultra, and then converted to three-dimensional (3D) structures by ChemBio 3D Ultra. The initial three-dimensional structures were optimized using the MMFF94 force field with default parameters. Then the Auto Dock Tools (ADT) soft was used to convert the mol2 files into the final coordinate files for docking studies. A molecular docking simulation of those compounds was performed with the AutoDock Vina program. Each computation was performed using the default parameters as described in the AutoDock Vina manual except for grid dimensions. Considering the differences of molecule size, each grid computation was performed as large as possible with a grid box of 30×30×30 Å, with 1 Å spacing, to ensure that there were enough box dimensions to cover all the active site residues and to allow for the flexible rotations of all molecules. And then, the grid was centered at the middle of Sudlow's site I and Sudlow's site II, respectively. The docking result was shown by PyMOL.

The binding of the tested natural components would cause different changes in the fluorescence spectra of BSA due to the protein conformation transformation. The interactions between the tested components and BSA were studied by analysis of the fluorescence spectra of BSA in the absence and presence of different concentration of tested components. The effect of these components on the BSA fluorescence spectra is as shown in Fig 3. As shown in Fig 3, when the excitation wavelength was fixed at 280 nm, BSA had a strong fluorescence emission band at 355 nm. The decrease of the fluorescence intensity value of BSA at 355 nm followed with the successive addition of SaB and HSYA indicated that these two components could quench the fluorescence of BSA. Meanwhile, the increase of the fluorescence intensity value of BSA at 355 nm followed with the successive addition of Syr indicated that Syr could enhance the fluorescence of BSA. All these results suggested that SaB, HSYA, and Syr could bind to BSA and induce the microenvironment transformations around the BSA protein.

The peak position of each fluorescence emission spectra was maintained at 355 nm without any blue shift or red shift, suggesting that the binding of these three natural components did not cause obvious changes in the polarity environment around the chromophore of tryptophan [31, 32] . The quenching efficiency of SaB was much greater than that of HSYA at the same concentration, and the subsequent addition of SaB increased the emission at~490 nm due to SaB being bound to BSA. In addition, the occurrence of an isoactinic point at 445 nm was considered as direct evidence of the existence of SaB-BSA complex, which suggested that there to be a static quenching process in the SaB-BSA binding system. Beyond these three components, there was no obvious change in the fluorescence spectra of BSA with the successive addition of the other five components, possibly due to the very low binding of these five components with BSA leading to very little changes in the microenvironment around the chromophore of tryptophan.

To illustrate the binding profiles of these tested components, the fluorescence emission intensity data for BSA at the peak position were analyzed by the followed equations ((Eq 1)-(Eq 4)), as shown in Figs 4-6. According to fluorescence spectrometry studies, SaB and HSYA can quench the intrinsic fluorescence of BSA, and the quantum yield of fluorescence decreased with the increasing quencher molecule concentration. Fluorescence quenching can be divided into static quenching procedure and dynamic quenching procedure. The static quenching is usually resulted from the formation of a stable complex between the protein and quencher, while, the dynamic quenching is usually resulted from collisional encounters between the protein and quencher [33] . Both the static and dynamic quenching procedure can be described using the linear Stern-Volmer equation [34] [35] [36] [37] [38] as follows: As shown in Fig 4, the curves of F 0 /F versus [Q] had a good linearity when the ratio of C SaB / C BSA ranged from 0.5 to 6 and when the ratio of C HYSA /C BSA ranged from 5 to 20, which were plotted according to Eq (1). When the ratio of C SaB /C BSA was larger than 6, the Stern-Volmer plot of the SaB-BSA system changed to an upward curvature, indicating a combined quenching procedure at a higher concentration ratio of C SaB /C BSA .

The modified Stern-Volmer equation (Eq (2)) is another way to describe the quenching process [33, 39] . The modified Stern-Volmer plots of the SaB-BSA system and the HYSA-BSA system are shown in Fig 5 .

The fluorescence emission intensities of BSA can also be analyzed the modified Scatchard equation as follows:

Though the modified Scatchard equation, log[(F 0 -F)/F] was plotted against log[Q], and the values of K b and n were found from the intercept and slope, respectively, as shown in However, the intensity of BSA intrinsic fluorescence increased with the increasing Syr concentration. In this condition, the fluorescence data were analyzed by the Lineweaver-Burk equation as follows [40, 41] , and the result was shown in Fig 7.

The calculated fluorescence parameters of a single component binding with BSA are presented in Table 1 . In our study, the binding parameter K q of SaB which was calculated by the Stern-Volmer Eq (1) was 6.83×10 12 M -1 s -1 and was much larger than that of HSYA (0.53×10 12 M -1 s -1 ). These two calculated K q values were all far higher than the maximum scatter collision quenching constant (2×10 10 M -1 s -1 ). It is indicated that both of the quenching processes of SaB and HSYA to BSA were initiated by static quenching mechanism. This result confirmed the above analysis of fluorescence emission spectrometry. The binding parameters K a that were obtained from the Eq (2) for SaB and HSYA were 8. . The value of n for SaB and HSYA was 1.10and 1.11, respectively. Therefore, it has been proved that there was only one class of binding site for SaB and HSYA on BSA. All of the parameters for SaB were consistent with previous studies [16] . Based on the above data, we concluded that SaB-BSA binding was stronger than the binding of HSYA-BSA due to the much higher values of K SV , K q , and K b [42] . As to fluorescence enhancement situation, the fluorescence data of Syr were analyzed using Eq (4). The binding constant K was 2.7×10 4 M -1 for the Syr-BSA system.

Based on the above studies, SaB is the most highly bound to serum albumin. That means that compared with the overall amount of SaB, the amount of SaB that is available to diffuse into the target tissue may be significantly reduced, and the pharmacological effects may consequently be poor. However, the multi-components coexisting in DHI would indeed affect the binding of SaB-serum albumin system, thereby changing the free SaB concentration in the plasma. Therefore, the influence of the coexisting multi-components on SaB-serum albumin binding should be carefully studied to determine the scientific principle of compatibility for Traditional Chinese Medicine and to further ensure safety in clinical application.

Site marker competitive experiments were carried out to identify the binding site of SaB on BSA using molecules that were well known as specifical binding markers of BSA. BSA is a globular heart-shaped non-glycoprotein, and has two ligand-binding sites located in the hydrophobic cavity, which referred as Sudlow's site I and site II [43] . From X-ray crystallographic studies, warfarin has been demonstrated to be the site marker of site I in HSA, while ibuprofen is a site II binder [2] . Due to the 88% sequence identity between BSA and HSA [44] , warfarin and ibuprofen are still used as site markers for site I and site II of BSA, respectively, even if there are no exact X-ray crystal structures for the warfarin-BSA complex or the ibuprofen-BSA complex. Thus, information about the SaB binding site can be obtained by comparing the differences in the fluorescence of the SaB-BSA binding system in the absence and presence of the two markers.

In site marker competitive experiments, BSA and relative site marker were mixed in a ratio of 1:1, then different concentrations of SaB solution were prepared. The fluorescence quenching data of the SaB-BSA system in the presence of site markers were analyzed using the Eq (1) and Eq (2) as shown in Fig 8. The binding parameters were calculated and are summarized in Table 2 . The binding parameters of the SaB-BSA system with warfarin decreased almost 40% compared to those of without warfarin. On the other hand, the binding parameters of the SaB-BSA system with and without ibuprofen were comparable. This result suggested that SaB bound on BSA within Sudlow's site I position. 

In order to discuss the effects of the coexisting components from Honghua (Flos Carthami Tinctorii) in DHI on the SaB-BSA binding system, we carried out series fluorescence spectrometry studies of the SaB-BSA binding system in the presence of those components. First, BSA was mixed with the coexisting components in a 1:1 ratio. Test solutions containing different concentrations of SaB (from 0 M to 40×10 -6 M) were prepared with fixed BSA and coexisting components at a concentration of 5×10 -6 M. As shown in Fig 9 and Table 3 , SaB also caused the intrinsic fluorescence quenching of BSA in the presence of HYSA, Syr, Phe, Uri, Cyt, and Ade. In the presence of these natural components, there were still upward curvatures when the concentration was larger than 30×10 -6 M, and within the linear concentration (from 0 M to 30×10 -6 M), the values of K q for the SaB-BSA system were still larger than 2×10 10 M -1 s -1 . These results suggested that the coexistence did not change the quenching mechanism of the SaB-BSA binding system. As shown in Table 3 , HYSA, Syr, Uri, Cyt, and Ade decreased the binding parameters K b of the SaB-BSA system by 21-58%, while Phe enhanced the binding parameter K b of the SaB-BSA system. The changes in the other binding parameters, such as K q, K sv , and K a , were similar to those of K b . Therefore, the participation of these natural components may affect the interaction of the SaB-BSA system.

Furthermore, to verify the interaction between SaB and BSA in the entire DHI system, our collaborator prepared special samples of DHI that specifically knocked-out SaB [45, 46] . In this experiment, the concentrations of BSA and SFDHI were 5×10 -6 M and 0.1 gL -1 , respectively. The concentrations of SaB varied from 0 M to 40×10 -6 M. As shown in Fig 10 and Table 4 , the fluorescence emission spectra of BSA with different concentrations of SaB in the presence of SFDHI are very similar to those in the absence of SFDHI. At the same concentrations (from 0 M to 30×10 -6 M), the curve of F 0 /F versus [Q] was linear. When the concentration was greater than 30×10 -6 M, the Stern-Volmer plot changed to an upward curvature, indicating a combined quenching at a higher concentration ratio of C SaB /C BSA . The value of K q for SaB was still greater than 2×10 10 M -1 s -1 , indicating that the quenching also corresponded to a static quenching mechanism. The other parameters were also calculated within the linear concentration and are summarized in Table 5 . Compared with the binding parameter K b of "pure" SaB-BSA system, SFDHI decreased the binding parameter K b of the SaB-BSA system by 32%, and the changes in the other binding parameters, such as K q, K sv , and K a , agreed with those of K b . Based on the above studies, when DHI was used in the mammal bodies, SaB is released from serum albumin more quickly than when it is used alone, which may increase the concentrations of unbound SaB in plasma and improve the pharmacological effects of SaB.

AutoDock Vina-based molecular docking includes an entire surface search of the selected protein region to locatethe most optimum binding sites and an energy match calculation to identify the conformations of the ligand molecules [47] [48] [49] . The aim of this study was to evaluate the binding affinities of these components in DHI on plasma protein and to determine the most optimum binding site. Two crystallographic structures of HSA, which co-crystallized with warfarin (entry code 1H9Z) [29] and with ibuprofen (entry code 2BXG) [30] , in Protein Data Bank (PDB) was selected for docking studies. It's because that warfarin and ibuprofen has been demonstrated to be the site marker of site I and site II. The conformation of the protein with site marker is a good starting model for further docking studies. On the other hand, the structural information of BSA with a proper site marker ligand (warfarin nor ibuprofen) was not provided in the Protein Data Bank. We chose the crystallographic structure encoded 4JK4 [28] for docking studies towards BSA. Because 4JK4 is the only crystallographic structure which can provide informations of the amio acid residues lying in site I binding pocket in the presence of a ligand. Moreover, the co-crystallized ligand of 4JK4 is located in both site I and site II binding pocket. It can also used to simulate the amio acid residues lying in site II binding pocket. The docking scores are presented in Table 5 . From the molecular docking data, we could confer that Ade, Phe, DSS, Uri, and Cyt bound very weakly to BSA and HSA, while HSYA and Syr had much higher binding ability to BSA and HSA, SaB represented the highest binding ability to both BSA and HSA. Meanwhile, the binding site of SaB, HSYA, and Syr was within Sudlow's site I. All of the docking results offered a rational molecular explanation for the previous experimental findings.

It is evident that several amino acids with hydrophobic and hydrophilic characteristics were in contact with SaB in these BSA and HSA complexes and, that hydrogen bonds play an important role in the binding system. In the SaB-BSA complexes (Fig 11b) . Lys-195, Arg-218, Arg-222, and Arg-257 formed hydrogen bonds with SaB, water molecules were also likely to serve as a bridge for producing hydrogen bonds.

In this study, the interaction of the natural components in DHI with BSA under physiological conditions was investigated using fluorescence spectra technology. Molecular docking studies between these components and BSA/HSA were carried out to provide a molecular explanation for the binding system. According to the results, SaB exhibited a very strong ability to quench the intrinsic fluorescence of BSA through a static quenching procedure. The binding constant (K b ) was 18.6×10 4 M -1 at 310 K. HYSA showed a much lower binding ability with binding constant (K b ) of 1.48×10 4 M -1 at 310 K. Syr could enhance the intrinsic fluorescence of BSA, and the binding constant (K) was 2.7×10 4 at 310 K. Base on these studies, we chose SaB as a research target to investigated the influence of the multi-components coexisting in DHI on serum albumin binding. The results showed that the participation of these natural components in DHI could affect the interaction of the SaB-BSA system. Therefore, we concluded that when DHI is used in mammals, SaB would be released from serum albumin more quickly, which may increase the concentrations of unbound SaB in plasma and improve the pharmacological effects of SaB. This work provides some research basis for the rational clinical use of DHI. And also provide a new perspective to reveal the compatibility principle of DHI.

Human Serum Albumin as a 'Silent Receptor' for Drugs and Endogenous Substances

Atomic structure and chemistry of human serum albumin

Drug-protein binding: a critical review of analytical tools

Interaction of the Anticancer Plant Alkaloid Sanguinarine with Bovine Serum Albumin

Interaction between pirenoxine and bovine serum albumin in aqueous solution

Study on the interaction between carbonyl-fused N-confused porphyrin and bovine serum albumin by spectroscopic techniques. Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy

Interactions of bovine serum albumin with biological buffers, TES, TAPS, and TAPSO in aqueous solutions

Binding investigation on the interaction between Methylene Blue (MB)/TiO2 nanocomposites and bovine serum albumin by resonance light-scattering (RLS) technique and fluorescence spectroscopy

Spectroscopic studies on the interaction between chalcone and bovine serum albumin

Clinical observation of Danhong Injection (herbal TCM product from Radix Salviae miltiorrhizae and Flos Carthami tinctorii) in the treatment of traumatic intracranial hematoma

Protective effect of Danhong injection on cerebral ischemia-reperfusion injury in rats

The antioxidant-activity-integrated fingerprint: An advantageous tool for the evaluation of quality of herbal medicines

Qualitative evaluation and quantitative determination of 10 major active components in Carthamus tinctorius L. by high-performance liquid chromatography coupled with diode array detector

Characterization of in vivo antioxidant constituents and dual-standard quality assessment of Danhong injection

Determination of Phenolic Acids in Danshen Preparations by LC with Chemiluminescence Detection

Investigation of the binding of Salvianolic acid B to human serum albumin and the effect of metal ions on the binding

The interaction between protocatechuic aldehyde and human serum albumin using three-dimensional fluorescence techniques

Study of interaction between syringin and human serum albumin by multi-spectroscopic method and atomic force microscopy

Interactions of different polyphenols with bovine serum albumin using fluorescence quenching and molecular docking

Quantization of bovine serum albumin by fluorescence enhancement effects and corresponding binding of macrocyclic host-protein assembly

Denaturation of human serum albumin under the action of cetyltrimethylammonium bromide according to fluorescence polarization data of protein

Detection of severe acute respiratory syndrome (SARS) coronavirus nucleocapsid protein in human serum using a localized surface plasmon coupled fluorescence fiber-optic biosensor

Interaction of human serum albumin with charge transfer probe ethyl ester of N,N-dimethylamino naphthyl acrylic acid: An extrinsic fluorescence probe for studying protein micro-environment

Characterization of the Binding of Metoprolol Tartrate and Guaifenesin Drugs to Human Serum Albumin and Human Hemoglobin Proteins by Fluorescence and Circular Dichroism Spectroscopy

Probing the Binding Sites of Antibiotic Drugs Doxorubicin and N-(trifluoroacetyl) Doxorubicin with Human and Bovine Serum Albumins

Interaction of Virstatin with Human Serum Albumin: Spectroscopic Analysis and Molecular Modeling

A combined spectroscopic, docking and molecular dynamics simulation approach to probing binding of a Schiff base complex to human serum albumin

Crystallographic studies of the complexes of bovine and equine serum albumin with 3,5-diiodosalicylic acid

Structural basis of the drugbinding specificity of human serum albumin

Induced optical activity of the metarhodopsins

Study on the Interaction of Cationic Lipids with Bovine Serum Albumin

Principles of Fluorescence Spectroscopy

Fluorescence quenching studies with proteins

Quenching of protein fluorescence by oxygen. Detection of structural fluctuations in proteins on the nanosecond time scale

Multi-spectroscopic analysis and molecular modeling on the interaction of curcumin and its derivatives with human serum albumin: A comparative study

A combined spectroscopic, molecular docking and molecular dynamic simulation study on the interaction of quercetin with beta-casein nanoparticles

A spectroscopic study of the interaction of isoflavones with human serum albumin

Binding of puerarin to human serum albumin: A spectroscopic analysis and molecular docking

Study of interaction between syringin and human serum albumin by multi-spectroscopic method and atomic force microscopy

Interaction of chlorpromazine with myoglobin and hemoglobin: A comparative study

Nanosecond segmental mobilities of tryptophan residues in proteins observed by lifetime-resolved fluorescence anisotropies

Further Characterization of Specific Drug Binding Sites on

Synthesis of a Novel Hydrazone Derivative and Biophysical Studies of Its Interactions with Bovine Serum Albumin by Spectroscopic, Electrochemical, and Molecular Docking Methods

Analysis of the synergistic effect of glycyrrhizin and other constituents in licorice extract on lipopolysaccharide-induced nitric oxide production using knock-out extract

A novel "target constituent knock-out" strategy coupled with TLC, UPLC-ELSD and microcalorimetry for preliminary screening of antibacterial constituents in Calculus bovis

Blind docking of drug-sized compounds to proteins with up to a thousand residues

AutoDock4 and AutoDock-Tools4: Automated docking with selective receptor flexibility

Ligand docking and binding site analysis with PyMOL and Autodock/Vina