key: cord-0000753-7eflwyxk
authors: Liu, Yanli; Huangfu, Jie; Qi, Feng; Kaleem, Imdad; E, Wenwen; Li, Chun
title: Effects of a Non-Conservative Sequence on the Properties of β-glucuronidase from Aspergillus terreus Li-20
date: 2012-02-07
journal: PLoS One
DOI: 10.1371/journal.pone.0030998
sha: e1ae1fce6ed744522728aef322c22b5f239b9157
doc_id: 753
cord_uid: 7eflwyxk

We cloned the β-glucuronidase gene (AtGUS) from Aspergillus terreus Li-20 encoding 657 amino acids (aa), which can transform glycyrrhizin into glycyrrhetinic acid monoglucuronide (GAMG) and glycyrrhetinic acid (GA). Based on sequence alignment, the C-terminal non-conservative sequence showed low identity with those of other species; thus, the partial sequence AtGUS(-3t) (1–592 aa) was amplified to determine the effects of the non-conservative sequence on the enzymatic properties. AtGUS and AtGUS(-3t) were expressed in E. coli BL21, producing AtGUS-E and AtGUS(-3t)-E, respectively. At the similar optimum temperature (55°C) and pH (AtGUS-E, 6.6; AtGUS(-3t)-E, 7.0) conditions, the thermal stability of AtGUS(-3t)-E was enhanced at 65°C, and the metal ions Co(2+), Ca(2+) and Ni(2+) showed opposite effects on AtGUS-E and AtGUS(-3t)-E, respectively. Furthermore, Km of AtGUS(-3t)-E (1.95 mM) was just nearly one-seventh that of AtGUS-E (12.9 mM), whereas the catalytic efficiency of AtGUS(-3t)-E was 3.2 fold higher than that of AtGUS-E (7.16 vs. 2.24 mM s(−1)), revealing that the truncation of non-conservative sequence can significantly improve the catalytic efficiency of AtGUS. Conformational analysis illustrated significant difference in the secondary structure between AtGUS-E and AtGUS(-3t)-E by circular dichroism (CD). The results showed that the truncation of the non-conservative sequence could preferably alter and influence the stability and catalytic efficiency of enzyme.

Glycyrrhizin (GL), the main constituent of licorice extract (Glycyrrhiza glabra), is a natural edulcorant as well as an important ingredient of traditional Chinese medicine [1, 2, 3] . By hydrolyzing one or two distal glucuronides, GL can be transformed into glycyrrhetinic acid monoglucuronide (GAMG) or glycyrrhetinic acid (GA) ( Figure 1 ). As an important derivative of GL, GAMG displayed stronger physiological functions than GL such as antiviral, anti-inflammatory, anti-tumor functions, and so on; and it is also 1000-fold sweeter than saccharose [4] . On the other hand, GA is the bioactive substance of GL well known for its pharmacological features [4, 5, 6] . The research on GL biotransformation catalyzed by b-glucuronidase (GUS, EC 3.2.1.31) was reported mainly in animal tissues such as duck [7] and human [8] , whereas studies on GL biotransformation in fungal species are few [9] . In our previous work, a fungal strain, Aspergillus terreus Li-20 was screened, which can use GL as a carbon source and produce GAMG and GA after catalysis by b-glucuronidase (AtGUS). The main disadvantages of AtGUS were low enzyme productivity, low catalytic efficiency, and pathogenicity, which rendered it unsafe for use in the food and medical industries.

To overcome disadvantages of a natural enzyme, many methods was applied to obtain artificial evolution enzymes, and this approach is not only faster than natural evolution but also provides a deeper understanding of enzyme evolution. Several methods of designing new enzymes are available, and gene sequence truncation is also investigated for its effects on enzymatic properties. The non-conservative N-terminal domain of the protein phosphatase1 (PP1), with 1-8 residues deleted, showed higher sensitivity to three substrates and influenced the structure and properties of PP1 [10] , whereas the truncation of the Cterminal region improved the thermal stability of endo-bglucanase from Bacillus subtilis JA18 [11] . However, the loss of the C-terminal regulatory domain resulted in a loss of the ability to catalyze the aldol reaction [12] .

With development of molecular biology and bioinformatics characterization, an increasing number of sequence data have been cloned and applied in the biotransformation industry. Bioinformatics characterization from the National Center for Biotechnology Information (NCBI) showed that most b-glucuronidases belong to the glycoside hydrolase family (GHF) 2, and all of them consist of sugar-binding, immunoglobulin-like b-sandwich, and TIM barrel domains (triosephosphate isomerase, TIM) [13, 14, 15] . The TIM barrel domain, which is one of the most common catalytic domains, is adopted by about 10% of the enzymes; thus, sequence modification inside or outside the domain to improve the enzymatic property and determine the catalytic mechanism was reported in many studies. The site-directed mutagenesis of seven amino acids (aa) in the TIM barrel domain was performed to investigate the importance of the residue in the catalysis of an exo-b-d-glucosaminidase from Trichodema reesei [16] . Heparanase is an endo-b-d-glucuronidase, and its C-terminal region, which is not an integral part of the TIM barrel domain, is essential for the enzymatic activity and secretion of heparanase [17] .

Although b-glucuronidases from many species have been registered in Genbank, only a few genes have been published for GL biotransformation [18] . Three fungal strains, namely, A. terreus Li-20, P. purpurogenum Li-3, and A. ustus Li-62, were screened in our previous studies and represented three modes of GL biotransformation: (1) GLRGA+GAMG; (2) GLRGAMG; and (3) GLRGA [9] . The three b-glucuronidase genes were cloned in our laboratory, and the aa sequence alignment showed that the bglucuronidase from A. terreus Li-20 (AtGUS) was quite different from the other two b-glucuronidases(PGUS and AuGUS) in Cterminal non-conservative sequence. AtGUS can hydrolyze GL into two products; thus, the different modes of GL biotransformation of the b-glucuronidases from the other two fungi may be related to the natural evolution in the sequence. In the present research, Atgus and the partial sequence [Atgus(-3t)] without Cterminal non-conservative sequence behind the TIM barrel domain were amplified in order to investigate effects of nonconservative sequence on enzymatic property.

No specific permits were required for the described field studies. No specific permissions were required for these locations/ activities. No location is privately-owned or protected in any way. The field studies did not involve endangered or protected species.

In our previous work, A. terreus Li-20 was isolated and screened from a G. glabra planting field in Shihizi, Xinjiang. It was incubated in 100 ml liquid Czapek's medium in a 500 ml Erlenmeyer flask at 30uC and placed in a shaker incubator at 170 rpm.

Escerichia coli DH5a and E. coli BL21 were used as hosts for plasmid amplification and expression, respectively. The plasmids pMD19-T (TaKaRa, Japan) and pET28a (+) (Invitrogen, U.S.) were used as vectors. The recombinant cells were inoculated in a lysogeny broth (LB) medium with kanamycin (50 mM) and operated at 37uC for 3 h. The recombinant protein was induced by adding 0.4 mM isopropyl-b-D-thiogalactopyranoside (IPTG).

GL was purchased from Xinjiang Tianshan Pharmaceutical Co. (China). GA was purchased from Sigma Chemical Co. (U.S.), whereas GAMG was obtained from the Nanjing University of Technology, China. Methanol was of chromatographic grade. All other chemicals used were of analytical grade. The DL2000 marker and the protein low weight marker were purchased from TaKaRa, Japan.

An intron in an AtGUS genomic sequence was removed via three-step polymerase chain reaction (PCR) to express the gene in E. coli BL21 (Figure 2A ). According to the database of A. terreus NIH2624, a primer set containing P1(59-CCGTACgTAATGCT-GAAGCCCCGACAAACACCTT-39) and P2(59-CATGCGG-CCGCTTAAGCGCCAAATAGGAAGTATAGT-39) was designed to obtain the sequence with an intron from the A. terreus Li-20 genome under the following conditions: 94uC for 10 min, 30 cycles of 94uC for 1 min, 58uC for 1 min, 72uC for 2 min, and a final extension at 72uC for 10 min with Ex Tag (TaKaRa, Japan). After ligated into PMD19-T, a primer set containing P3(59-CACTCCACCGTGTTTTCAATGTATGAGCTGCAGC-39) and P4(59-CCGGCTTCGCAGCTATGTGTCTTGAGCATC-39) was used for the second PCR, and the reaction was performed by Pfu polymerase (Shenggong, China) under the following conditions: 94uC for 10 min, 30 cycles of 94uC for 1 min, 55uC for 1 min, and 72uC for 5 min. The fragment amplified in the second PCR was ligated by T4 DNA ligase after a terminal phosphation with T4 polynucleotide kinase (Takara, Japan), and the positive clones were screened in an LB plate with 100 mg/mL ampicillin. The primer set containing P1 and P5(CATGCG-GCCGCTTAACTCCACCGTGTTTTCAATGTATG-39) was used for AtGUS(-3t) under the same conditions as those of P3 and P4.

After IPTG introduction and the ultrasonication of the recombinant E. coli BL21 cells, supernatant was brought to 70% saturation with (NH4) 2 SO 4 and stored overnight at 4uC, and then again centrifuged. The enzymes expressed by pET28a(+) vector were fused to an N-terminal six-histidine tag and purified via nickel chelate affinity chromatography (GE, U.S.), which was eluted with 150 mM imidazol. The quality of the purified protein was evaluated using sodium dodecyl sulfate polyacrylamide gel electrophoresis and coomassie blue staining.

HPLC for analysis of GL, GAMG, and GA GL, GAMG, and GA concentrations were measured via reverse-phase high performance liquid chromatography (HPLC) on a C18 column (4.6 mm6250 mm, 5 mm particle size, Kromasil) at 40uC. The sample (injection volume, 10 ml) was separated with a mobile phase consisting of 6% acetic acid/ methanol (19:81 v/v), and the elution was monitored via ultraviolet detection at 254 nm. The GL, GAMG, and GA amounts were calculated from the standard curve of the peak area and concentration. Determination of pH and temperature profiles

The activity of b-glucuronidase was determined using GL as the substrate. The reaction mixture consisted of the enzyme and substrate (2 g/L GL) at a 1:4 (v/v) ratio.

50 Mm Na 2 HPO 4 -citric acid buffer at pH 4.0-8.0 was used for determine the pH effects of the enzyme. The catalytic activity of the enzyme was examined at 30 to 70uC in 50 mM Na 2 HPO 4citric acid buffer (pH 7.0). The enzyme activity under the optimal temperature and pH was defined as 100%.

The temperature stability of the enzyme was determined by incubating the enzyme samples at different temperatures (45, 55, 65, and 75uC) for 15, 30, 45, 60, and 120 min at optimum pH without the substrate GL, and the residual activity was determined at the optimum temperature.

The effect of several metal ions on the activity of AtGUS(-3t)-E and AtGUS-E was investigated. The enzyme activity was determined in the reaction mixture consisting of K + (KCl), Na + (NaCl), Mg 2+ (MgCl 2 ), Mn 2+ (MnCl 2 ), Co 2+ (CoCl 2 ), Ca 2+ (-CaCl 2 ), Ni 2+ (NiSO 4 ), Cu 2+ (CuSO 4 ), and Al 3+ (AlCl 3 ) ions at final concentrations of 1 and 5 mM. The enzyme activity was subsequently determined at the optimum temperature after incubation for 30 min.

Different concentrations of the substrate GL, ranging from 0.375 to 4 mM, were prepared to determine the kinetic constants. The catalytic reactions were continuously monitored, and the initial velocities were fitted to the Michaelis-Menten equation using the Origin 7.5 software (OriginLab). The values of the Michaelis-Menten constant (Km), maximal velocity (Vmax), catalytic turnover rate (Kcat), and catalytic efficiency (Kcat/Km) were evaluated.

Far-UV Circular dichroism (CD) spectra were recorded at 25uC in the range from 190 to 260 nm with a spectral resolution of 0.2 nm using a Jasco J-715 spectropolarimeter. The scan speed was 100 nm/min and the response time was 0.125 s with a bandwidth of 1 nm. Quartz cells with an optical path of 0.1 cm were used. Typically, scans were accumulated and subsequently averaged. The spectra were corrected for the corresponding protein-free control.

The protein three-dimensional structural was modeled by modeler 9v7 to analyze three domains of the protein.

The 2,193 bp product was amplified and sequenced using a genomic template ( Figure 2B) , and its 219 bp intron was analyzed by NCBI. After a three-step PCR, the full encoding sequence was cloned. The results show that the open reading frame of this gene was 1,974 bp ( Figure 2B) , which encodes for 657 aa.

The conserved domain database (CDD) was performed to analyze domains of AtGUS, and there were sugar-binding domain, immunoglobulin-like beta-sandwich domain, and TIM barrel domains in it which all belonged to glycoside hydrolase family (GHF) 2. GHF 2 comprised b-galactosidase (EC 3.2.1.23), bmannosidase (EC 3.2.1.25), and b-glucuronidase (EC 3.2.1.31), so the phylogenetic tree was constructed according to it (Figure 3) . It showed that the gene cloned was a b-glucuronidase gene named AtGUS (Genbank accession No. JF894133), which was found very similar to PGUS(Genbank accession No. EU095019) from P. purpurogenum Li-3 and AuGUS (Genbank accession No. JN247805) from A. ustus Li-62, especially in the sugar-binding, immunoglobulin-like beta-sandwich, and TIM barrel domain ( Table 1 ). The obvious difference among them lied in the non-conservative sequence of the C-terminal behind the TIM barrel domain which may result in the difference enzymatic properties. Therefore, the 1-1,776 bp segment, named Atgus(-3t), was amplified in the 

Both pET28a(+)-AtGUS and pET28a(+)-AtGUS(-3t) were constructed and transformed into the E. coli BL21 strain, and the recombinant proteins AtGUS-E and AtGUS(-3t)-E were successfully expressed ( Figure 4) . The induction condition for the optimum production of the two recombinant proteins was 20uC with 0.4 mM IPTG. Both AtGUS-E and AtGUS(-3t)-E were purified through Ni-NTA sepharose (Figure 4) . The target protein was eluted with 150 mM imidazole. Furthermore, the concentrations of the soluble purified proteins of AtGUS-E and AtGUS(-3t)-E were determined as ,7 and ,12 mg/L, respectively. Both purified enzymes could hydrolyze GL into GAMG and GA.

We investigated the enzymatic properties to determine the effect of the non-conserved sequence on the enzyme. The optimal pH for the bioconversion reaction by AtGUS-E was 6.6, whereas that for AtGUS(-3t)-E was 7.0 ( Figure 5A) .The optimal temperatures for AtGUS-E and AtGUS(-3t)-E were both 55uC ( Figure 5B) .

Enzyme thermal stability experiments showed that the enzymes remained more than 80% residual activity at 45uC and 55uC for 120 min heat treatment, respectively ( Figure 5C and 5D) . At 65uC, the residual activity of AtGUS(-3t)-E remained almost 60% of enzymatic activity after 30 min heat treatment, which was comparatively higher than that of AtGUS-E with less than 5% residual activity after the same treatment. At a higher temperature (75uC), both enzyme residual activity rapidly vanished, and within 15 min heat treatment, almost all enzymatic activity was lost.

The effect of various metal ions with different concentration gradients (from 1 to 5 mM final concentration) on the activities of AtGUS(-3t)-E and AtGUS-E was evaluated, and the results are presented in Table 2 . The enzymatic activity assayed in the absence of metal ions was taken as 100%.

The effect of monovalent cations on the two enzymes was similar: the 1 and 5 mM K + and 1 mM Na + exhibited no obviously affecting effects on the activity of AtGUS(-3t)-E and AtGUS-E, while the 5 mM Na + inhibited the enzymatic activity. The divalent cations Mg 2+ and Mn 2+ discretely promoted the activities of AtGUS-E and AtGUS(-3t)-E. With increasing concentration of Co 2+ , AtGUS-E was firstly activated and then inhibited while AtGUS(-3t)-E showed an inverse effect. Ca 2+ and Ni 2+ also exhibited opposite effects on the two enzymes. Ca 2+ at 5 mM final concentration enhanced the activity of AtGUS-E by 107% but inhibited AtGUS(-3t)-E activity by 61%. In the presence of 5 mM Ni 2+ buffer, AtGUS(-3t)-E was increased by 78%, whereas AtGUS-E was decreased by 40%. Cu 2+ distinctively inhibited the enzyme activity, while Al 3+ showed activation at 1 mM concentration and inhabitation at 5 mM concentration to both enzymes. These results reveal that K + , Na + , Mg 2+ , Mn 2+ , Cu 2+ , and Al 3+ exhibited nearly similar effects on the activity of AtGUS-E and AtGUS(-3t)-E; however, Co 2+ , Ca 2+ , and Ni 2+ , showed opposite effects on both enzymes, respectively. The data reported here have been taken from three replicate samples from three independent experiments.

The reaction kinetics of AtGUS-E and AtGUS(-3t)-E were determined. The Vmax of the AtGUS-E and AtGUS(-3t)-E enzymes toward GL were calculated using Lineweaver-Burk plots ( Table 3 ) and were determined as 1.84 and 0.97 mmolmin 21 mg 21 , respectively. The Km of the recombinant AtGUS(-3t)-E was 1.95 mM, which was approximately one-seventh that of AtGUS-E (12.9 mM), indicating that a higher affinity of AtGUS(-3t)-E for GL than AtGUS-E. In addition, the catalytic efficiency (kcat/Km) of AtGUS(-3t)-E (7.16 mM s 21 ) was 3.2 folds higher than that of AtGUS-E (2.24 mM s 21 ). The enzymatic activities were determined at different concentrations of the substrate GL from three independent experiments.

To determine the impact of the sequence truncation on the structure of the protein, a circular dichroism (CD) spectra was amplified. The far-UV spectra for AtGUS-E and AtGUS(-3t)-E have been presented in Figure 6 . It illustrated that the curves exhibited significant difference between the two proteins. These results suggest that the secondary structure of AtGUS-E has changed after deletion of non-conservative sequence.

The b-glucuronidase (GUS) gene was first cloned in 1987 [19] , and in subsequent years, many GUS genes were cloned and registered in the GenBank. However, this gene has never been cloned for the hydrolysis research of GL into GAMG or/and GA, with more valuable merits. Based on CDD analysis, the three domains of the enzyme AtGUS were well investigated, and the main aim of the present study is to modify the non-conservative sequence of AtGUS and try to obtain an artificial evolution enzyme with better enzymatic properties.

The TIM barrel domain is a canonical (b/a) 8 -barrel composed of eight units, each of which consists of a b-strand and an a-helix [20] . There was a non-conservative segment behind the catalytic domain (TIM barrel domain) of AtGUS which showed low identity with PGUS and AuGUS after the primary sequence alignment. A model of the three-dimensional structure of AtGUS was presented in the current research ( Figure 7) . The deleted sequence exhibited no involvement in the TIM barrel domain, locating near the ''stability face'' rather than the ''catalytic face'' [21] .

AtGUS-E and AtGUS(-3t)-E were very similar with each other at some enzymatic properties, such as optimal pH and optimal temperature. It was reported in previous studies that many modified enzymes maintained some original enzymatic properties even though some sequence has been modulated [10] . Furthermore, we could also speculate that the non-conservative sequence lied outside of the catalytic face of the TIM barrel domain which may not affect the catalytically active residues and the GL biotransformation mode.

Interestingly, the stability of AtGUS(-3t)-E was slightly higher than that of AtGUS-E at 65uC. Similar results have been reported that the modification of the C-terminal region could improve the thermal stability of endo-b-glucanase from Bacillus subtilis JA18 [11] . In addition, previous study showed that ab-loops in ''stability face'' are important for the stability [22] . The truncation of the non-conservative sequence lies near ab-loops of the stability face, therefore, we can predicted that the deletion of the C-terminal region outside the TIM barrel domain has influence on thermal stability of AtGUS. The effect of nine metal ions with different concentration gradients on the activities of AtGUS(-3t)-E and AtGUS-E was evaluated, and Co 2+ , Ca 2+ , and Ni 2+ showed opposite effects on the two enzymes, respectively. In addition, AtGUS(-3t)-E showed higher affinity and catalytic efficiency than AtGUS(-3t)-E. Both of the result might suggest that the spatial structural rearrangement, and the speculation has been proved by CD spectra, which showed great difference between the secondary structure of the two enzymes. It has been reported that the loops above the catalytic face was very important for substrate hydrolysis [23] , so we can conclude that the truncation of the non-conservative domain firstly changed the secondary structure of the enzyme and then influenced the substrate affinity, catalytic efficiency and metal ions effects. Moreover, the crystal structure of human bglucuronidase was firstly reported in 1996 [24] , and the structure of bacterial b-glucuronidase has also been published recently [25] . Both b-glucuronidase structures were tetramers. The deleted region of the AtGUS non-conservative sequence lies outside the main three domains, so it was predicted that the non-conservative might change the combination pattern of each monomer.

Different methods have been applied in creating new enzyme such as error-prone PCR [26] , DNA shuffling [27] and staggered extension process (StEP) [28] . Some efforts have been made to modify the enzyme by directed screening but high ratio of negative mutated forms of enzyme in the initial screening is a big hurdle and requires further screening for positive mutated forms of enzyme. Every method has its own advantages and disadvantages that determines the feasibility of a particular method so as sequence truncation [10, 11, 12] . Based on the same hydrolyzing mode, relatively higher thermal stability, and especially the enhanced affinity and catalytic efficiency for GL, deletion of the non-conservative sequence behind the TIM barrel domain was a successful evolution of AtGUS. The truncation of non-conservative region based on sequence alignment could be an effective way of artificial enzyme evolution as it can alter and influence the stability and catalytic efficiency of enzyme, and could help in understanding the relationship between the structural modulation and enzymatic properties. 

Mechanism of antiinflammatory action of glycyrrhizin: effect on neutrophil functions including reactive oxygen species generation

Glycyrrhizin, an active component of liquorice roots, and replication of SARSassociated coronavirus

In vitro anti-Helicobacter pylori activity of Extractum liquiritiae, glycyrrhizin and its metabolites

Chemical modification of glycyrrhizic Acid as a route to new bioactive compounds for medicine

Acute renal failure following hypokalemic rhabdomyolysis due to chronic glycyrrhizic acid administration

A comparison of the antihepatotoxic activity between glycyrrhizin and glycyrrhetinic acid

Differences in the metabolism of glycyrrhizin, glycyrrhetic acid and glycyrrhetic acid monoglucuronide by human intestinal flora

Biocatalytic properties of a novel crude glycyrrhizin hydrolase from the liver of the domestic duck

Screening strains for directed biosynthesis of b-d-mono-glucuronide-glycyrrhizin and kinetics of enzyme production

The N-terminal domain influences the structure and property of protein phosphatase 1

Truncation of the cellulose binding domain improved thermal stability of endo-beta-1, 4-glucanase from Bacillus subtilis JA18

The Cterminal regulatory domain is required for catalysis by Neisseria meningitidis alphaisopropylmalate synthase

Henrissat B.Structures and mechanisms of glycosyl hydrolases

Conserved catalytic machinery and the prediction of a common fold for several families of glycosyl hydrolases

Three-dimensional structure of beta-galactosidase from E. coli

The essential acidic amino acid residues for catalytic activity of an exo-b-d-glucosaminidase from Trichoderma reesei

Structure-function approach identifies a COOH-terminal domain that mediates heparanase signaling

Cloning and prokaryotic of betaglucuronidase from Penicillium purpurogenum Li-3

GUS fusions: betaglucuronidase as a sensitive and versatile gene fusion marker in higher plants

Catalytic versatility, stability, and evolution of the (beta/alpha) 8 -barrel enzyme fold

Stability, catalytic versatility and evolution of the (beta/alpha)8-barrel fold

Protein sequence randomization: efficient estimation of protein stability using knowledge-based potentials

The aglycone specificitydetermining sites are different in 2,4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA)-glucosidase (maize beta-glucosidase) and dhurrinase (sorghum beta-glucosidase)

Structure of human beta-glucuronidase reveals candidate lysosomal targeting and active-site motifs

Alleviating cancer drug toxicity by inhibiting a bacterial enzyme

Singlestep assembly of a gene and entire plasmid from large numbers of oligodeoxyribonucleotides

Molecular evolution by staggered extension process (StEP) in vitro recombination