id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
44501	Baxter, Leon H.	Toy Craft			.txt	text/plain	28120	1874	90	Bore holes with a No. 3 bit in the rounded ends of the long legs, 5/8" screw holes bored 2-3/8" from the ends and 3/8" from the edges, as hole is bored and a piece is sawed out, as shown in the drawing, to The ends of the cross pieces are cut at a bevel, as shown, and notches Holes are bored in the two upper cross pieces, 3/4" from their ends. small hole is bored in the center of the upper end to start the screw A piece of 3/4" dowel is cut off 7/8" long and a similar hole is bored Place a center line, longways of the piece, as shown in the end view. Holes are bored in the bottom piece for screws, 2-7/8" from the ends and Glue and screw these two pieces in place in the center of the front end	./cache/44501.txt	./txt/44501.txt