id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
20317	Hall, Eugene Edward	A Treatise on Staff Making and Pivoting Containing Complete Directions for Making and Fitting New Staffs from the Raw Material			.txt	text/plain	10568	526	79	staff, from the steel to the jewels, and their relation to the pivots, points, not only as regards staffs, but pivots also, whether applied to a Select a piece of Stubb's steel wire, say No. 46, or a little larger than the largest part of the finished staff is to too hard to work well under the graver nor too soft for the pivots. of a staff while in a split chuck, cut it off and turned and finished the apply the gauge to the new staff, as shown in Fig. 10, and the taper end finish all the lower portion of the staff while the work was held in the shown the correct manner of applying the graver when turning a pivot. When the staff is finished from the lower pivot to the seat of the undertake to do this work, there are but few who can pivot a staff in	./cache/20317.txt	./txt/20317.txt