key: cord-323029-7hqp8xuq
authors: Bognár, Zsófia; Gyurcsányi, Róbert E.
title: Aptamers against Immunoglobulins: Design, Selection and Bioanalytical Applications
date: 2020-08-11
journal: Int J Mol Sci
DOI: 10.3390/ijms21165748
sha: 
doc_id: 323029
cord_uid: 7hqp8xuq

Nucleic acid aptamers show clear promise as diagnostic reagents, as highly specific strands were reported against a large variety of biomarkers. They have appealing benefits in terms of reproducible generation by chemical synthesis, controlled modification with labels and functionalities providing versatile means for detection and oriented immobilization, as along with high biochemical and temperature resistance. Aptamers against immunoglobulin targets—IgA, IgM, IgG and IgE—have a clear niche for diagnostic applications, therefore numerous aptamers have been selected and used in combination with a variety of detection techniques. The aim of this review is to overview and evaluate aptamers selected for the recognition of antibodies, in terms of their design, analytical properties and diagnostic applications. Aptamer candidates showed convincing performance among others to identify stress and upper respiratory tract infection through SIgA detection, for cancer cell recognition using membrane bound IgM, to detect and treat hemolytic transfusion reactions, autoimmune diseases with IgG and detection of IgE for allergy diseases. However, in general, their use still lags significantly behind what their claimed benefits and the plethora of application opportunities would forecast.

The expression of aptamer was first coined 30 years ago by Ellington and Szostak for RNA sequences that bind specifically to organic dye molecules. It is based on the Latin term "aptus" meaning to fit, which refers to the binding between the selected RNA strand and the target molecule [1] . At the same time, Tuerk and Gold introduced the expression of Systematic Evolution of Ligands by Exponential Enrichment (SELEX) for production of high-affinity RNA ligands to bacteriophage T4 DNA polymerase [2] . This is an in vitro process that aims at isolation and amplification of the nucleic acid candidates with highest specificity and affinity from a nucleic acid library comprising a high number of different sequence strands with the same length. To enable polymerase chain reaction (PCR)-based amplification (or in vitro transcription), the variable randomized sequence of each oligonucleotide, typically 30-50 nt, is flanked by two ca. 18-30 nt fixed sequence regions for primer binding. In the selection step, a library of oligonucleotides consisting of up to ca. 10 15 different sequences is incubated with the target molecule with the expectation that some of the oligonucleotides will have the right sequence to fold in structures enabling their binding to the target. After incubation, the unbound sequences are separated, followed by a more stringent elution and the recovery of the target bound oligonucleotides, i.e., putative aptamers. These sequences are then PCR amplified and the enriched pool is used in the subsequent round of the selection along with the original library. These steps are repeated 5-15 times to enrich the aptamer candidates with high binding affinity to the target. These affinity and kinetics as well as selectivity against typical interferents or the sample matrix. The target selectivity of the enriched pool can be increased by counter-selection (counter-SELEX) [3] . During counter-selection, the library is screened for critical interferents, (e.g., close homologs of the target, or structurally-similar compounds); however, contrary to SELEX, the non-bound sequences are recovered and the bound are discarded. The selectivity of the resulting aptamers can be increased by including such counter-selection steps in the SELEX and using further only sequences that do not bound to the interferents (Figure 1 ). This is extremely important when generating aptamers for diagnostic applications as their cross-reactivity can be effectively minimized. Of note, the counterselection can be made against the sample matrix itself, e.g., by using magnetic nanoparticles with autoreactive cyanuric-groups on their surface that by incubation in target-free serum are modified with typical serum proteins [4] . Aptamers, which can bind universally on Fc region of antibodies can be selected with target replacement strategy coupled to conventional SELEX method, i.e., to achieve universal binding capability, multiple immunoglobulin subclasses have to be consecutively substituted in a single SELEX process [5] . Several different SELEX methods have been used to generate immunoglobulin aptamers including homogeneous, heterogeneous, bead-based SELEX processes, CE-SELEX (capillary electrophoresis-SELEX), µFFE-SELEX (micro-free flow electrophoresis-SELEX) and fully integrated selection processes on microfluidic devices (M-SELEX). For aptamer selection against rIgG [6] and IgE [7] , homogenous processes were used and the separation of bound and unbound nucleic Several different SELEX methods have been used to generate immunoglobulin aptamers including homogeneous, heterogeneous, bead-based SELEX processes, CE-SELEX (capillary electrophoresis-SELEX), µFFE-SELEX (micro-free flow electrophoresis-SELEX) and fully integrated selection processes selection of aptamers with proper binding properties. To achieve higher binding affinity and inhibit digestion by cellular nucleases, various modifications were implemented that targeted the terminus of the strands, thesugar rings and bases, including the insertion phosphodiester linkages or producing the mirror-image of the D-nucleic acid strand. The most commonly used non-natural aptamers are Spiegelmers, SOMAmers, thioaptamers and X-aptamers ( Figure 2 ). Spiegelmers are built up from non-natural L-nucleotides exhibiting nuclease resistance. Spiegelmers are also not recognized by polymerase enzymes during the amplification steps of SELEX and therefore cannot be obtained directly but by using mirrored targets and the natural D-nucleotides [27] . In SOMAmers (Slow Off-rate Modified Aptamers), chemically-modified nucleotides to infer protein-like properties are synthetized to achieve low dissociation constant. This is done through modification of the dU bases of the aptamers at the 5′ position with hydrophobic moieties, which improves their binding affinity, kinetics and selectivity and also increases their resistance to enzymatic degradation. In contrary to the Spiegelmers, SOMAmers can be selected and amplified using the conventional SELEX method with the modified nucleotides [28] . Thioaptamers are synthetized to accomplish stable cellular nucleic acid strands with the substitution of non-bridging phosphoryl oxygen atoms with sulfur. Similar to SOMAmers, they can be amplified by PCR, however the sulfur substitution can increase the non-specific interactions [29, 30] . Using click-chemistry and phoshporothioate backbone a wide variety of chemically-modified aptamers can be selected with increased binding affinity and nuclease resistivity. The 5′ position of the aptamer was modified with drug-like molecules, resulting in the next generation of the aptamers: X-aptamers, aptamers that include X-modified bases [31, 32] . The most widely used modified aptamer derivatives: Spiegelmers, SOMAmers, Thioaptamers and X-aptamers. R and Q are referring to ligands that can be coupled to the bases to increase the affinity of the aptamer for the target.

In principle, aptamers have essential advantages over antibodies. This includes the purely chemical synthesis that ensures practically no batch-to-batch variations, the fact that the selection can be conveniently restricted to a targeted epitope and the excellent thermal and chemical resistance (as well as biochemical in the case of non-natural aptamers). Moreover, various modifications can be implemented without activity loss, which allows the application of aptamers on many detection platforms. However, antibodies are not only competitors of aptamers as diagnostic reagents but also targets for aptamer selection. The purpose of this review is to compile and evaluate aptamers selected for the recognition of antibodies-IgA, IgM, IgG and IgE-as well as their design, properties and The most widely used modified aptamer derivatives: Spiegelmers, SOMAmers, Thioaptamers and X-aptamers. R and Q are referring to ligands that can be coupled to the bases to increase the affinity of the aptamer for the target.

In principle, aptamers have essential advantages over antibodies. This includes the purely chemical synthesis that ensures practically no batch-to-batch variations, the fact that the selection can be conveniently restricted to a targeted epitope and the excellent thermal and chemical resistance (as well as biochemical in the case of non-natural aptamers). Moreover, various modifications can be implemented without activity loss, which allows the application of aptamers on many detection platforms. However, antibodies are not only competitors of aptamers as diagnostic reagents but also targets for aptamer selection. The purpose of this review is to compile and evaluate aptamers selected for the recognition of antibodies-IgA, IgM, IgG and IgE-as well as their design, properties and diagnostic applications. Such a review is motivated also by the present context of COVID-19 pandemics, in which the indirect virus detection is largely based on the detection of IgM and IgG produced by the immune system against the virus.

Since the production, overproduction or the absence of antibodies are highly correlated with several diseases and infections, they are frequently targeted diagnostic biomarkers. Detection of Fab domain ensures high specificity and the detection of the Fc domain provide generality to their detection. There are five subgroups of immunoglobulins (Igs): IgM, IgG, IgA, IgD and IgE ( Table 1) . As a primary immune response, IgM antibodies are secreted, therefore they can be useful targets for acute exposure diagnosis. However, during infection switching occurs to other subgroups, most importantly to IgG that is responsible for the neutralizing immune response and has the highest concentration and longest half-life in the blood. IgA is found on the mucosal surface with direct neutralization of toxins, bacteria and viruses. IgD is a membrane bound antibody and plays a major role in cell activation regulatory, however its processes are not totally understood. IgE is related to allergic reactions, although its concentration is negligible compared to the IgG, thereby its diagnostic application might be difficult [33] .

As biomarkers, antibodies are mainly used for the diagnosis of various infections, autoimmune disease, allergy, immune deficiencies and cancer [34] . Upon infection, the B cells are stimulated by the antigen and the production of antigen specific antibodies starts. Firstly, IgM is secreted during the primary immune response in the first 4-96 h, whereas IgG and IgA antibodies are produced 7-10 days after infection [35] . Therefore, the type of the antibody is indicative of the elapsed time from infection, e.g., alleviating discrimination the acute or chronic stage. Moreover, the antigen specific Fab domain defines the specificity of the antibody. These features are the core of the point-of-care (PoC) tests for COVID-19, where the IgM and IgG concentration from fingertip or venous blood is determined by lateral flow assays or ELISA (enzyme-linked immunosorbent assay) methods [36] .

During autoimmune diseases, IgG and IgM autoantibodies are produced as loss of self-tolerance against self-antigens. There are environmental and inherited factors contributing to autoimmune disorders. In the case of Sjorgen's syndrome, rheumatoid arthritis, Alzheimer's disease and cancer, autoantibodies can be early stage biomarkers, since they can be detected many years before the expression of symptoms. Based on the specificity and the concentration of autoantibodies prognosis, disease staging and treatment monitoring can be performed [33] .

Allergic diseases are caused by excessive sensitivity of the immune system to otherwise largely harmless agents, e.g. pollen and food ingredients. The exposure to allergens triggers the production of antigen specific IgE and the highly elevated levels are indicative of the allergic reaction [37, 38] .

The absence of normal immunoglobulin concentration can indicate immunodeficiency, which arises from a defect in IgG, IgM and IgA production. Immune deficiency is diagnosed by measuring serum immunoglobulin level before and after immunization with pneumococcus and influenza vaccine. If the antibody concentration is not raised upon immunization, antibody deficiency has occurred, indicating the disability of the body to eliminate pathogens, which might cause repetitive infection and organ damages [39, 40] .

The immune system is able to sense extraordinary expression of cellular components associated with cancer evolution. The secreted antibody is specific for the components eliminated by the tumor cell, thereby the own immune response of the patent can be used to detect cancer at an early stage [41] . 

Salivary secretory immunoglobulin A (SIgA) and salivary α-amylase (sAA) are immunological stress markers and increasing concentrations may enable the discrimination between comfortable and uncomfortable physical states. 

Salivary secretory immunoglobulin A (SIgA) and salivary α-amylase (sAA) are immunological stress markers and increasing concentrations may enable the discrimination between comfortable and uncomfortable physical states. Moreover, SIgA is an indicator of upper respiratory tract infection. While there are simple, commercialized platforms to measure the sAA concentration based on the amylase activity [52] , the results may be highly influenced by the salt concentration and the pH. Thereby, for proper physical state determination, the measurement of SIgA is necessary. The use of monomer alcoholism serum 20.2 mg/mL 27.3 mg/mL [50] 

Salivary secretory immunoglobulin A (SIgA) and salivary α-amylase (sAA) are immunological stress markers and increasing concentrations may enable the discrimination between comfortable and uncomfortable physical states. Moreover, SIgA is an indicator of upper respiratory tract infection. While there are simple, commercialized platforms to measure the sAA concentration based on the amylase activity [52] , the results may be highly influenced by the salt concentration and the pH. Thereby, for proper physical state determination, the measurement of SIgA is necessary. The use of aptamers for the selective recognition of SIgA is rendered difficult by the fact that, since SIgA is hydrophilic and negatively charged owing to the dominance of hydrophilic amino acids in the Fc domain, there is an electrostatic repulsion between putative aptamers and SIgA [53] .

A microfluidic-based aptamer selection was developed with integrated selection and amplification method for aptamer selection to IgA as representative target. The device was built up with two chambers for selection and amplification connected with a serpentine-shaped microchannel. Magnetic beads were modified with IgA placed into the selection chamber, where the strongly bound aptamers were transferred by thermal elution to the amplification chamber, to perform PCR amplification directly on the surface of primer-modified magnetic beads. After PCR amplification, the nucleic acid strands were reintroduced in the separation chamber for further affinity-based selection for the target. Upon completion of the SELEX procedure off-chip amplification of the aptamer candidates and the original DNA pool was performed using fluorescent forward primer. Affinity characterization by fluorescent binding assay was accomplished on IgA-modified magnetic beads, where the aptamer candidates showed significant increase in fluorescent intensity compared to the original DNA library. The results suggest that this magnetic bead-based multiround SELEX process on a microchip has the capability for aptamer selection for antibodies within 4 h [21] . However, the aptamer candidates did not reach desired binding affinity for immunoanalytical assays, most likely due to the electrostatic penalty in the interaction. This fundamental limitation could be circumvented with modified aptamers with enhanced hydrophobic interaction properties, which was published by Minagawa et al. [16] . Using the base-appended base (BAB) approach, where U gu bases (U gu stands for a guanine base at the 5th position of the uracil) were used to increase the binding strength of the fluorescent-labeled aptamer-target interaction as determined by fluorescence polarization in diluted human saliva. The selected aptamer (IgA gu1 ) was bound to the SIgA with high specificity and showed no cross-reactivity to IgG and serum IgA ( Table 2 ). The sensitivity of fluorescence polarization detection can be increased by reducing the molecular weight of the fluorescent-labeled aptamer. Therefore, the length of the aptamer has been reduced in two steps (IgA gu1-3 and IgA gu1-3-3 ) to ensure both the structural stability and increased sensitivity. While IgA gu1-3 performed the best in terms of binding kinetics based on SPR results, it could not be used for the FP measurements, because only minor alterations in the fluorescence anisotropy upon target binding was detectable. Therefore, the shorter form, IgA gu1-3-3 , was used, which still had the proper dissociation constant (10.4 nM) for SIgA determination in saliva, where its typical concentration is 0.6-1.2 µM. The FP measurement showed good correlation with the antibody-based ELISA assay, indicating the potential application of the aptamer-based approach for SIgA detection. 

The recognition of the alteration on cell surfaces might be a key step for cancer detection since gene mutations-originated from cancers-cause aberration in cell membrane receptor expression and function. With efficient molecular probes, early diagnostic of cancers might be established, based on the study of cell membrane receptors.

Tang and his coworkers selected the first immunoglobulin M specific aptamer for the detection of Ramos cells, a B-cell lymphoma cell line, without identifying the particular target of the aptamer on the surface of the cell [25] . The selected TD05 aptamer ( Figure 3 ) showed high specificity towards Ramos cells and no cross-reactivity was observed with other type of lymphoma cells, such as CCRF-CEM (acute lymphoblastic leukemia cell line), Toledo cells or other type of bone marrow cells. To identify the membrane protein target of the aptamer, a photochemically-modified nucleic acid strand was covalently cross-linked to its target on the surface of the cell. The protein-aptamer complex was enriched by magnetic bead-based extraction and the collected protein was analyzed by mass spectrometry, identified by database search and reconfirmed by the purified antibody and the selected aptamer interaction. This revealed that the TD05 aptamer binds selectively to the membrane bound heavy chain of the immunoglobulin M antibody (IGHM), which is a biomarker for the development of Burkitt's lymphoma [54] . However, the TD05 aptamer was not able to discriminate between membrane bound and circulating forms of IgM and could not be used under physiological conditions, because the aptamer lost its affinity and stability at physiological temperature in human serum. To overcome this drawback, several modifications have been made to increase specificity and resistance in physiological conditions. Firstly, the stem length of the hairpin structured aptamer was decreased with ten nucleotides to result a more stable secondary structure (TD05.1), which fits better to the binding site of the protein.

In addition, carefully chosen LNA bases have been incorporated at the 3 end (TD05.17) to increase the melting temperature, nuclease stability and the stability of the folded form of the aptamer. With these modifications the K D value was decreased 10 folds at 4 • C, but remained >10,000 nM at 37 • C. Accordingly, for in vivo application, the dissociation had to be improved further, which was achieved with multivalent analogs synthetized with poly-ethylene-glycol (PEG) linkers to crosslink membrane IgMs (mIgM) in the B-cell receptors at the cell surface. Divalent (L-BVA.8S), trivalent (L-TVA.8S) and tetravalent (L-TetVA.8S) aptamer scaffolds have been synthetized to decrease the K D to 6222, 256 and 272 nM, respectively, at 37 • C. In addition, the half-life of the tetravalent scaffold in human serum was increased to 8.75 h and no interaction with soluble IgM was detected [55] .

Using TD05 aptamers, Zheng et al. measured the reorganization of the IgM and IgD antibodies on the surface of the Ramos cells with branched proximity hybridization assay (bPHA), which ensures linear amplification upon proximity of the target molecules. The TD05 aptamer was modified either on the 5 or the 3 end, resulting TD05-and TD05+ nucleic acid strands, without changing the binding affinity of the aptamer. The Ramos cells were incubated with the elongated TD05+ and TD05-aptamer pair, and, upon hybridization, a pair of Z-DNA was added serving as a bridge for pre-amplifier, which was followed by the hybridization of amplifier and fluorescent label probe for signal amplification based on the proximity of mIgM within the nanometer resolution. With this method, the re-organization of the antibodies on Ramos cell was shown: IgD and IgM were segregated apart on resting B-cell, but after stimulation of the B-cell concatenation was observed [56] .

The TD05.1 aptamer was chosen by Liu et al. for spatially and quantitatively detect membrane bound IgM molecules on Ramos cells with silver nanoparticles [57] . The 5 end of the aptamer was modified by eight cytosine, because cytosine is favored to anchor silver clusters. By this, the mIgM distribution can be localized with confocal fluorescence microscopy and the amount of mIgM could be quantified with ICP-MS. improved further, which was achieved with multivalent analogs synthetized with poly-ethyleneglycol (PEG) linkers to crosslink membrane IgMs (mIgM) in the B-cell receptors at the cell surface. Divalent (L-BVA.8S), trivalent (L-TVA.8S) and tetravalent (L-TetVA.8S) aptamer scaffolds have been synthetized to decrease the KD to 6222, 256 and 272 nM, respectively, at 37 °C. In addition, the halflife of the tetravalent scaffold in human serum was increased to 8.75 h and no interaction with soluble IgM was detected [55] . Using TD05 aptamers, Zheng et al. measured the reorganization of the IgM and IgD antibodies on the surface of the Ramos cells with branched proximity hybridization assay (bPHA), which ensures linear amplification upon proximity of the target molecules. The TD05 aptamer was modified either on the 5′ or the 3′ end, resulting TD05-and TD05+ nucleic acid strands, without changing the binding affinity of the aptamer. The Ramos cells were incubated with the elongated TD05+ and TD05aptamer pair, and, upon hybridization, a pair of Z-DNA was added serving as a bridge for preamplifier, which was followed by the hybridization of amplifier and fluorescent label probe for signal amplification based on the proximity of mIgM within the nanometer resolution. With this method, the re-organization of the antibodies on Ramos cell was shown: IgD and IgM were segregated apart on resting B-cell, but after stimulation of the B-cell concatenation was observed [56] .

The TD05.1 aptamer was chosen by Liu et al. for spatially and quantitatively detect membrane bound IgM molecules on Ramos cells with silver nanoparticles [57] . The 5′ end of the aptamer was modified by eight cytosine, because cytosine is favored to anchor silver clusters. By this, the mIgM TD05.1 aptamer was also used to develop a chemical strategy for the glycosylation mapping of mIgM antibodies on live cells. For this purpose, the aptamer was modified at its 3 end with cyclooctyne, which did not influence the selectivity of the aptamer for mIgMs at the surface of Ramos cells. The cells were cultured with N-azidoacetylmannosamine to generate an N-azidoacetylneuraminic acid at the cell surface during glycosylation that, after azide modification, could react with the cyclooctyne modification of the aptamer. With this strategy, the glycans could be localized within 1-3 nm of the 3 terminus of the IgM-bound aptamer [58] .

TD05.1 aptamer was used in distinct cell type differentiation in a highly multiplexed manner, based on the mIgM bound aptamer on single cell surface and simultaneous transcriptome profiling [59] . An aptamer pool and heterogeneous cell samples were incubated, where all the aptamers were modified with a poly-A tail on the 3 end using polyadenylation. The aptamer decorated cells were co-encapsulated with barcoded beads, after lysis the aptamers and mRNAs were able to hybridize to the beads through the poly-A tail. Upon RT-PCR, the droplets contained the cell specific barcoded aptamers and mRNAs, which allowed the cells to be pooled, sequenced and evaluate epitope profiles according to the barcodes. Therefore, this method could be used to discriminate Ramos cells from other kind of cells based on selective aptamer binding and differences in gene expression.

Zumrut et al. introduced a ligand-guided selection (LIGS) strategy for identifying specific aptamers for a predetermined epitope of the target protein. The model was built up to select aptamers for the IgM expressed on Burkitt's lymphoma cell, the same target as of TD05. The SELEX process was followed by LIGS, where aptamer candidates were pre-incubated with the target cells, followed by removal of unbound aptamers. Then, the anti-IgM antibodies were competed for the pre-determined epitopes of mIgM and eluted the aptamers, which shared the same binding site [26] . However, the affinity of these aptamers was not yet appropriate for diagnostic applications and therefore structural optimization was performed. R1 aptamer (Table 3) was chosen for further development, because it had high ability to recognize IgM on the cell surface and block the antigen binding region of anti-IgM antibodies. The R1 aptamer was truncated at the 3 (R1.1) and 5 (R1.2) ends to remove primer regions, which has a limited role in binding to the target protein. The shorter form (R1.2) could not be displaced by anti-IgM, due to its short length and conformational stability, therefore the aptamer could be used for the detection of sIgM and mIgM in ex vivo experiments. The lack of proper differentiation between sIgM and mIgM is based on the secondary ligand selection during LIGS, since anti-IgM antibody was also able to identically bind to the epitope of sIgM and mIgM, a feature which was descended to the aptamer [60, 61] . Dimeric aptamers have also been synthetized with PEG-linkers in different length (3, 5 or 7 spacer molecules); the dimeric R1.2 aptamer showed specific binding to the mIgM positive cells, therefore it can be used as a diagnostic tool and therapeutic agent in samples of Waldenström's macroglobulinemia patents [62] . Comprehensive structural analysis of R1.2 have been carried out, examining the role of the G-quadruplex (GQ) structures. The GQ structure with affinity constant to the target in the nanomolar range has been identified in tris(hydroxyamino)-methane solutions with elevated K + level. This is in agreement with previously published papers that the GQ assembly is induced most effectively in K + -rich environment (>50 mM) [63] [64] [65] . Table 3 . Selected aptamers against IgMs and their equilibrium dissociation constants at 37 • C and 4 • C.

Sequence ( 

Aptamers against IgG molecules are in the center of attention owing to their broad range of applicability in bioanalytical assays. The selected aptamers can be classified in two main groups: Fc region specific aptamers and Fab specific aptamers. The Fc binding aptamers are most often used as secondary labeling agent (tracer) in affinity assays or for affinity purification of antibodies, while Fab binding aptamers in specific target determinations.

The aim of the Fc specific aptamers is to recognize epitopes which are commonly shared in the IgG domain of a certain species. These antibody binding aptamers are applicable for affinity chromatography [66] , small protein detection [67] , visualization of cells and organisms [68] and signal amplifiers [69] [70] [71] , which would cause enhanced sensitivity and improved limit of detection and limit of quantitation.

A 2 -fluoropyrimidine-modified aptamer for human IgG1 have been selected and analyzed by several research groups. The selected Apt8-2 aptamer showed high specificity to the Fc domain of human IgG (hFc1), but no cross reactivity to IgGs from other species was detected (Table 4 ) [17] . X-ray crystallography of the aptamer-hFc1 complex elucidated that the RNA aptamer is bound to the less-positively charged surface of the Fc region of the hIgG in contrast with the assumption that the RNA binding area takes place on the positively charged surface of the protein via electrostatic interaction. It was shown that the formation of the aptamer-antibody complex is supported by multiple weak secondary interactions as van der Waals interactions and hydrogen bonds. In addition, according to the investigated crystal structure, no aptamer induced structural changes were detected on the hIgG1 [72, 73] . Ab initio FMO calculation have also been performed to better understand the high specificity and affinity of the Apt8-2 aptamer. It was shown that the G7 (stands for guanine, the 7th base from the 5' end of the aptamer) nucleotide performed the strongest interaction energy with the Lys340 on the Fc region of the IgG. This energy is partially based on the electrostatic interaction of the negatively charged RNA and the positively charged protein. The interaction between the G7 nucleotide and the Lys340 could be the driving force of the RNA aptamer binding. However, the high degree of the shape complementarity suggests the presence of the hydrogen bonds, π-π stacking and CH-π interactions, which might be responsible for the high selectivity of the RNA aptamer [74] . The X-ray crystal structure revealed that the oxygen atoms of the phosphate backbone is bound to divalent ions, such as Ca 2+ and Mg 2+ , in the major groove to stabilize the folded structure of the RNA aptamer. Therefore, the specific three-dimensional structure of the aptamer can be reversibly destabilized with chelate complexing agent [72] . Since the process is fully reversible and applied under neutral conditions, Apt8-2 seems to be an ideal recognition element in affinity chromatography ( Figure 4A ), i.e., as the elution step is very mild, unlike in case of using Protein A/G, the active conformation of the therapeutic antibodies can be maintained after purification/separation. Moreover, the Apt8-2 aptamer was further manipulated by ribose 2 -modification to generate Apt131, which was resistant in alkaline conditions (up to pH = 14), making the aptamer-modified resin reusable numerous times with equivalent binding capacity as Protein A [66] . The aptamers could also be used for oriented IgG immobilization in chemical sensors. A relevant example is the confinement of thiol-labeled RNA aptamers on the surface of gold coated silica nanoparticles to immobilize hIgG1 molecule exposing their binding domains for fibrinogen binding and subsequent optical detection ( Figure 4B ) [67] . The same Apt8-2 had also been used in a novel method for aptamer-directed conjugation of DNA to IgG antibodies [68] . Two methods of nucleic acid conjugation to antibody have been investigated: (i) templated conjugation method, when a second DNA strand is guided to react with the antibody by the aptamer; and (ii) direct method, when the aptamer itself is reacted with the target antibody. Especially, the direct conjugation of the aptamer has possible uses in immune-PCR or ELISA for in vitro detection. ( Figure 4B ) [67] . The same Apt8-2 had also been used in a novel method for aptamer-directed conjugation of DNA to IgG antibodies [68] . Two methods of nucleic acid conjugation to antibody have been investigated: (i) templated conjugation method, when a second DNA strand is guided to react with the antibody by the aptamer; and (ii) direct method, when the aptamer itself is reacted with the target antibody. Especially, the direct conjugation of the aptamer has possible uses in immune-PCR or ELISA for in vitro detection. Apparently, the highest affinity aptamer selected for Fc domain is an RNA aptamer, called R18, which was found to have an equilibrium dissociation constant of 15 pM [6] . This targets rabbit IgG; therefore, it can be used as a secondary antibody-like aptamer against rIgG. According to the analysis and from the predicted structures, it was shown that one of the loops plays an important role in the binding activities, especially a single adenosine base in the 49th position, because two orders of magnitude increase was resulted when this adenosine was changed to guanosine. Truncation experiments were carried out showing that nearly the entire R18 aptamer is responsible for the binding toward the rIgG. The aptamer was capable to distinguish between the native structure of IgG and the denatured structure caused by SDS. The R18 aptamer showed a great performance in affinity assays with clear benefits over conventional ELISA systems by enabling the use of PCR for the detection. Thus, in the method coining the name of immuno-aptamer PCR (iaPCR), the usual ELISA protocol is followed, but the R18 aptamer replacing a secondary antibody enables in the last step the use of qRT-PCR for amplified detection ( Figure 4C ) [69] . The process differs from the immuno-PCR, because in iaPCR the covalent modification of the tracer antibody is circumvented, which simplifies and improves the sensitivity of the assay. As low as 16 attomoles could be detected in a relevant assay targeting VEGF (vascular endothelial growth factor), which is ca. 100 time lower than with commercially available antibody-based ELISAs. It is important to note that the aptamer has shown no cross-reactivity for mouse, rat, human, chicken, sheep and rat IgGs. The iaPCR has also been used for the detection tumor necrosis factor-α (TNF-α) [70] where the conventional ELISAs are likely to fail due to the low concentration of TNF-α (average concentration of 100 fM). However, using iaPCR and changing the solid support from plate to magnetic beads, a limit of detection of 10 fM was achieved. The main limitation of this methodology is the relatively long time (30-60 min) required for the PCR detection [70] .

Besides the PCR amplification, the inherent properties of nucleic acid strands could be used in charge modulation-based assays, i.e., the negative charge of the aptamers could be exploited for the indirect detection of the binding of various target. For instance, the change in surface charge upon the binding of R18 aptamer could be detected by silicon nanowire field-effect transistor (SiNW-FET). This enabled the label-free determination of 6X-histidine and amyloid β 1-42 (Aβ 1-42) in direct and Apparently, the highest affinity aptamer selected for Fc domain is an RNA aptamer, called R18, which was found to have an equilibrium dissociation constant of 15 pM [6] . This targets rabbit IgG; therefore, it can be used as a secondary antibody-like aptamer against rIgG. According to the analysis and from the predicted structures, it was shown that one of the loops plays an important role in the binding activities, especially a single adenosine base in the 49th position, because two orders of magnitude increase was resulted when this adenosine was changed to guanosine. Truncation experiments were carried out showing that nearly the entire R18 aptamer is responsible for the binding toward the rIgG. The aptamer was capable to distinguish between the native structure of IgG and the denatured structure caused by SDS. The R18 aptamer showed a great performance in affinity assays with clear benefits over conventional ELISA systems by enabling the use of PCR for the detection. Thus, in the method coining the name of immuno-aptamer PCR (iaPCR), the usual ELISA protocol is followed, but the R18 aptamer replacing a secondary antibody enables in the last step the use of qRT-PCR for amplified detection ( Figure 4C ) [69] . The process differs from the immuno-PCR, because in iaPCR the covalent modification of the tracer antibody is circumvented, which simplifies and improves the sensitivity of the assay. As low as 16 attomoles could be detected in a relevant assay targeting VEGF (vascular endothelial growth factor), which is ca. 100 time lower than with commercially available antibody-based ELISAs. It is important to note that the aptamer has shown no cross-reactivity for mouse, rat, human, chicken, sheep and rat IgGs. The iaPCR has also been used for the detection tumor necrosis factor-α (TNF-α) [70] where the conventional ELISAs are likely to fail due to the low concentration of TNF-α (average concentration of 100 fM). However, using iaPCR and changing the solid support from plate to magnetic beads, a limit of detection of 10 fM was achieved. The main limitation of this methodology is the relatively long time (30-60 min) required for the PCR detection [70] .

Besides the PCR amplification, the inherent properties of nucleic acid strands could be used in charge modulation-based assays, i.e., the negative charge of the aptamers could be exploited for the indirect detection of the binding of various target. For instance, the change in surface charge upon the binding of R18 aptamer could be detected by silicon nanowire field-effect transistor (SiNW-FET). This enabled the label-free determination of 6X-histidine and amyloid β 1-42 (Aβ 1-42) in direct and sandwich assay formats, respectively, through aptamer labeling of rIgG ( Figure 4C ) [71] . The negatively charged R18 aptamer amplified and stabilized the signal of the immunoassays lowering the LOD and LOQ as the conductance of the nanowires was significantly reduced by the increase in the negative surface charge. The developed detection methodology promises broad applicability for different targets where the final aptamer labeling induces significant surface charge density change, e.g., Alzheimer' disease markers.

The nonproteinaceous aptamers enable in a particular, but very relevant example the detection of protein targets by using non-selective protein dyes, i.e., R18 aptamer could be used for sensitive detection of rIgG employing Coomassie Brilliant Blue (CBB) dying followed by optical detection [75] . Apparently, such dyes able to interact with the protein targets, but not with the capture aptamers, and can be used as a cost-effective alternative of labeled tracer antibodies.

Liao and his coworkers selected aptamers against mouse IgG1, mouse IgG2 and mouse anti-HBV IgG with excellent selectivity, without interaction toward albumin, egg white protein and fat free powdered milk in dot-blot assay. The aptamer was coupled with a dsDNA served as a template for asymmetric polymerase chain reaction (A-PCR) [11] . In contrast with the method of Yoshida et al. [69, 70] , hybridization between the template and the primer strand was not required, making it more universal and effective. According to the results, the attachment of the dsDNA retained the specific binding of the aptamer to the antibodies and supports the amplification by PCR to detect aptamer binding. As 10 −3 -10 −6 ng of IgG could be determined with high sensitivity, and the method is adaptable to detect proteins, peptides, nucleic acids, toxins and ions with the attachment of the DNA template to the aptamer and making quantitative analysis with PCR [11] .

The previously mentioned aptamers showed great selectivity, although some methods require universal aptamers, which bind common regions of antibodies in the Fc domain. A novel SELEX method based on target replacement strategy offers further versatility to the selection, i.e., the IgG subclasses (anti-Hbs IgG, mouse IgG Fc, IgG1 and IgG2a) were sequentially replaced in every two SELEX cycle to select aptamers, which were able to bind in the common sites of the IgG subclasses, but were highly discriminative against trypsin, solcoseryl albumin and human serum. These universal aptamers might serve as more general biomedical probes in analytical applications, such as immune reaction-based analysis and antibody purification with binding characteristics similar to protein A/G [5] .

Since the Fc domains are shared in the immunoglobulin G antibodies of a certain species, the selection of aptamers for the Fab region must exclude Fc binding aptamers. Several approaches have been proposed to this end, including counterselection for the Fc domain and masking the Fc domain with antibody binding proteins, as Protein A or Protein G. The selected aptamers were used in quantitative detection of disease specific antibodies (Table 5) .

Aptamers (GQCL-4.7 and SSL 30 -2.5) against antigen binding domain of anti-ferritin antibody were selected [76] , where a counter-selection was obtained in every cycle with an unrelated antibody from the same species to eliminate the aptamer candidates specific for the Fc domain. The binding location was confirmed with a competitive assay, i.e., the aptamers competed with ferritin for the anti-ferritin antibody binding site.

The selection of Fc binding aptamers was avoided by masking the Fc fragment of the antibody of interest with Protein G. A modified SELEX method was implemented by Muharemagic et al., where the target antibody was immobilized on Protein G-modified magnetic beads and the immobilization has concealed the Fc domain from binding aptamers [19] . Neutralizing antibodies (nAb) were chosen as the target of the selections, which are generated upon repetitive administration of oncolytic viruses, resulting in a diminished anticancer effect of the virus. Upon binding of the aptamer candidates to the Fab region of the neutralizing antibodies, they inhibited the interaction between the vesicular stomatitis virus (VSV) and nAbs, thereby the anticancer effect of the virus was preserved. This allowed efficient cancer cell infection in the presence of nAbs and consequently enhanced in vivo survival. The shielding effect of the aptamers was confirmed by a bifunctional electrochemical (cyclic voltammetry and electrochemical impedance spectroscopy) immunosensor, making possible the quantitative detection of VSV with high sensitivity, selectivity, low cost and short analysis time. With multivalent aptamers (dimeric and tetrameric), the virus aggregation was further decreased, increasing the infectivity and stability in human serum [77] . Rhesus (Rh) is one of the most common blood group systems, where two main groups are distinguished: RhD-positive and RhD-negative. When RhD-negative persons are exposed to RhD-positive blood, they produce anti-D IgG antibodies, causing delayed hemolytic transfusion reactions. As a treatment, aptamers can be applied for blocking the anti-D allo-antibodies and RhD antigens combination. Zhang and his co-workers selected aptamer candidates, for the Fab domain of the anti-D allo-antibodies, while blocking the Fc domain with Protein A. To detect the efficiency of the aptamers hemagglutination inhibition assay was performed, when anti-D antibodies were completely neutralized even by 50 pmol of aptamer (Nos. 2 and 7 in Table 5 ) [18] . In contrast, when ssDNA aptamers were selected to the RhD antigen, the optimal concentration for the anti-RhD-mediated RBC agglutination was 500 pmol [79] .

Aptamers are promising tools also for the quantification and qualification of antibody-based biopharmaticals. Highly selective, sensitive, accurate and high-throughput analysis was introduced for bevacizumab detection, which is a humanized monoclonal antibody against vascular growth factor A to treat several cancer types. However, the concentration of bevacizumab has to be carefully determined to avoid side effects while preserving activity. For this purpose, a novel method was introduced by Yamada et al. Anti-idiotype DNA aptamer was selected for the complementary determining region (CDR) of the bevacizumab and was covalently immobilized to the microtiter plate. Bevacizumab from plasma samples interacted with the aptamer and a HRP conjugated Protein A was used as tracer for the colorimetric detection (ELAA-enzyme-linked aptamer assay). The dynamic range of the method is 5-500 ng/mL (34-3356 pM), which is comparable with the FDA approved ELISA process [78] . The same aptamer was used in affinity purification-high temperature reversed phase liquid chromatography (HP-RTLC) with fluorescence detection for bevacizumab determination from plasma samples from patients with lung cancer. A sharp, single peak was detected within 10 min, when bevacizumab was pre-extracted with anti-idiotype DNA aptamer-modified magnetic beads [80] . However, the limit of detection was 0.15 µg/mL (1 nM), which is ca. 2 orders of magnitude higher than the ELAA method (2.06 ng/mL (13.8 nM)). Another biopharmaceutically relevant antibody in cancer treatment, rituximab-a chimeric monoclonal anti-CD20 antibody-was also the target of aptamer selections. Six aptamer candidates (RA1-6), specific to the Fab domain of the antibody were selected, with dissociation constant of 354-887 nM. Despite the lower affinity, the aptamers were able to detect conformational changes of rituximab upon UV exposure, mechanical stress and storage at different temperatures. Thus, RA2, RA3 and RA4 aptamers can be used as an orthogonal method to detect changes in the antibody during operation and storage. Moreover, the aptamers showed high specificity in ELASA (enzyme linked apta-sorbent assay) method, without cross-reactivity toward glycosylated Fc domain of rituximab (Fc lyc), recombinantly expressed Fc/2 (Fc/2), adalimumab (adalim), bevacizumab (bevac) and etanercept (etan) [20] .

In a series of cases aptamers with higher binding affinity were found for the antigen-binding sites of antibodies than that of the natural antigen, thereby they were able to displace the antigen from the antibody binding sites in competitive ELISA method. A relevant example is the aptamer selected against C595, an anti-MUCI IgG3 monoclonal antibody [12] . According to the molecular model of C595, the antigen binding pocket is negatively charged due to three aspartate residues, which seemed to be essential for the MUC-1 antigen docking based on electrostatic interactions with arginine. In contrast, the binding of the aptamer was dominated by hydrophobic interactions and hydrogen bonds through the basis of the nucleic acid strands, overcompensating the electrostatic repulsion of the negatively charged phosphate backbone of the aptamer.

Several aptamers have been selected against autoantibodies (AABs) in an attempt to downregulate the body's immune response to its own tissues. These aptamers usually block the Fab domain of the antibody, thereby inhibit the binding between the autoantibody and the target, such as proteins, DNA or receptors. Aptamers were selected to detect Multiple Sclerosis (MS) [13, 14] , Systematic Lupus Erythematosus (SLE) [81] , Dilated Cardiomyopathy (DCM), Chagas' Cardiomyopathy (ChCM), Peripartum Cardiomyopathy (PPCM) [82] [83] [84] [85] [86] [87] [88] [89] , Extreme Insulin Resistance (type B) (T2DM) [90, 91] and Myastenia gravis (MG) [92] [93] [94] [95] [96] with high affinity (K D ≈ 1.2-75 nM) at an early stage of the diseases.

Moreover, 2 -F-Py (2 -fluoro pyrimidine) and 2 -A-Py (2 -amino pyrimidine) bases were widely used to increase the nuclease resistance of the aptamer. The aptamers targeting autoantibodies and their binding properties were summarized in Table 6 . Aptamers were also used to detect toxoplasmosis, which is an infection caused by a parasite, through the antibodies (IgG and IgM) produced in response to the infection by selecting aptamers recognizing their relevant paratopes (Table 7) . A quantum dot-labeled dual aptamer-based biosensor (Q-DAS) was developed by Luo and his coworkers for the detection of toxoplasma IgG antibodies in an aptamer sandwich complex. TGA6 aptamer was immobilized on the surface of a plate to capture the antitoxoplasma IgG, followed by a washing step and the introduction of the quantum dot-labeled TGA7 aptamer to form a TGA6/toxoplasma IgG/TGA7-QD complex. The measured fluorescent signal was linear within 0.5-500 IU, with an LOD of 0.1 IU. The steric crowding is a critical factor in the IgG binding even on the planar surface and on the curved surface of the quantum dots as well, therefore a five-base-pair-long oligo-T chain was added to reduce the steric hindrance. The Q-DAS biosensor showed great specificity against cytomegalovirus antibody, syphilis antibody, rubella antibody, antinuclear antibody, rheumatoid factor albumin, fibrinogen, IgE and IgM. The sensor was tested to detect clinical serum samples, and the results were compared with the Sabin-Feldman DT assay reference method, where 183 of 189 (95.9%) negative samples and 61 of 67 (91%) positive samples were accurately reported, with 6.5 IU cut-off. Therefore, the Q-DAS biosensor is a promising candidate for clinical toxoplasma detection at an early stage to reduce the spontaneous abortion, fetal death and birth defects [15] . 

Immunoglobulin E plays an important role in allergic diseases and pathogenesis of other disorders. Upon infection, IgE is produced as a response to an allergen, followed by antibody bonding to the FcεR receptors on the mast cells. Cross-linking of the bound IgE is occurred by the re-exposure of the allergen, resulting the release of mediators, such as histamine, lipid mediators and cytokines [38] . Therefore, blocking the interactions with Fc receptors may be used in the treatment of allergic responses while the quantitative measurement of IgE in body fluids can be applied for diagnosis. Several aptamers have been selected for the Fc region of the immunoglobulin E, however, the most frequently used two sequences were published by Wiegand et al., as they were shown to have excellent K D values, i.e. 30 and 10 nM, respectively (Table 8 ). Another selection strategy that approached this affintiy (average K D of 29 nM) was based on capillary electrophoresis as proposed by the Bowser group [9] . The binding of the putative aptamers to the larger size IgE could be detected through the change in the electrophoretic mobility with respect of free aptamers. The main advantage of this approach is that required only four selection rounds and by that reduced the selection time from 4-6 weeks to 2-4 days. The selection process could be further integrated by using micro free flow electrophoresis, which again ensured aptamer selection in four days with low nM average dissociation constants for IgE, without target immobilization, long incubation time and negative selection [10] . In terms of selection time reduction, the performance of microfluidics is hard to be surpassed as the strict control in terms of temperature and integrated PCR could reduce the overall duration of the process to 4 h with a similarly drastic reduction of the reagent consumption. However, the dissociation constant of the selected IgE aptamer (83.9 nM) was not as good as in selections made by classical SELEX and CE-SELEX [22] . A fully microchip integrated version of the electrophoretic selection process by combining the bead-based aptamer selection (bead-based PCR amplification) with gel electrophoresis was improved [23] , resulted in aptamers reaching a K D value of 18 nM in only 3 selection rounds [24] . The most commonly used colorimetric methods for IgE detection are based on measuring absorbance changes induced by enzyme or nanoparticle-based labels. Perhaps the simplest opportunity is provided by the dot-blot assays using horseradish peroxidase as labels. In such assays, IgE is generally spotted on nitrocellulose membrane and a biotinylated aptamer is used for selective IgE recognition coupled with an HRP conjugate that catalysis the formation of a colored compound. Relevant examples indicate that such assays can be accomplished in ca. 40 min with LODs in the lower nanomolar range [97] . However, the conventional HRP label can be replaced by DNAzymes exhibiting peroxidase activity that can be conveniently linked to the aptamer sequence, resulting in a bifunctional probe, e.g., IgE aptamer and peroxidase-active hemin aptamer. This was implemented in a sandwich assay by using a surface immobilized anti-IgE antibody and the bifunctional aptamer probe. To enhance sensitivity asymmetric, isothermal amplification (HDA-Helicase Dependent Amplification) was used ( Figure 5A ). Upon amplification, hemin could bind to the hemin specific part of the bifunctional aptamer that enabled the oxidation of the ABTS (2,2 -azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) into green color, which could be monitored by a simple spectrophotometer down to 1 pM or even by naked eye down to 10 pM [98] . A simpler but similar method based on DNAzymes was also developed for solid phase enzyme-linked immunosorbent detection of IgE [99] . The aptamer and G-quadruplex structured DNAzyme were immobilized on the surface of the wells. In the absence of IgE, a hairpin structure involving the anti-IgE aptamer and a G-quadruplex structure from DNAzyme were formed, therefore hemin was able to bind to the G-quadruplex structure to catalyze the H 2 O 2 mediated oxidation of ABTS. However, when IgE was present, the formation of the G-quadruplex is inhibited, and the absorbance reduced in an IgE concentration dependent manner ( Figure 5B ). This approach was shown to be applicable in urine samples with LOD of 10.5 pM, without the need of isothermal amplification or capture antibody.

IgE is generally spotted on nitrocellulose membrane and a biotinylated aptamer is used for selective IgE recognition coupled with an HRP conjugate that catalysis the formation of a colored compound. Relevant examples indicate that such assays can be accomplished in ca. 40 min with LODs in the lower nanomolar range [97] . However, the conventional HRP label can be replaced by DNAzymes exhibiting peroxidase activity that can be conveniently linked to the aptamer sequence, resulting in a bifunctional probe, e.g., IgE aptamer and peroxidase-active hemin aptamer. This was implemented in a sandwich assay by using a surface immobilized anti-IgE antibody and the bifunctional aptamer probe. To enhance sensitivity asymmetric, isothermal amplification (HDA-Helicase Dependent Amplification) was used ( Figure 5A ). Upon amplification, hemin could bind to the hemin specific part of the bifunctional aptamer that enabled the oxidation of the ABTS (2,2′-azino-bis (3ethylbenzothiazoline-6-sulfonic acid)) into green color, which could be monitored by a simple spectrophotometer down to 1 pM or even by naked eye down to 10 pM [98] . A simpler but similar method based on DNAzymes was also developed for solid phase enzyme-linked immunosorbent detection of IgE [99] . The aptamer and G-quadruplex structured DNAzyme were immobilized on the surface of the wells. In the absence of IgE, a hairpin structure involving the anti-IgE aptamer and a G-quadruplex structure from DNAzyme were formed, therefore hemin was able to bind to the Gquadruplex structure to catalyze the H2O2 mediated oxidation of ABTS. However, when IgE was present, the formation of the G-quadruplex is inhibited, and the absorbance reduced in an IgE concentration dependent manner ( Figure 5B ). This approach was shown to be applicable in urine samples with LOD of 10.5 pM, without the need of isothermal amplification or capture antibody. A label-free homogeneous detection was introduced by Yoshida et al., with aptameric enzyme subunit (AES), where the artificial enzyme subunit was constructed from two unmodified aptamers (thrombin binding aptamer and IgE binding aptamer). In the absence of IgE, the two aptamers were folded in a G-quartet structure, which by binding thrombin inhibited the clot formation of fibrinogen. A label-free homogeneous detection was introduced by Yoshida et al., with aptameric enzyme subunit (AES), where the artificial enzyme subunit was constructed from two unmodified aptamers (thrombin binding aptamer and IgE binding aptamer). In the absence of IgE, the two aptamers were folded in a G-quartet structure, which by binding thrombin inhibited the clot formation of fibrinogen. However, in the present of IgE, the G-quadruplex structure was destroyed resulting clot formation, and the clotting time could be measured with an automated fibrometer [100, 101] .

In colorimetric detections, nanoparticles are also frequently used as reporting agents including silver [102] , gold [103, 104] and carbon nanoparticles [105] and aptamer-labeled bacteriophages [106] . Aptamer-modified silver nanoparticles were used for rapid, visual IgE detection, where anti-human IgE antibodies were spotted on solid support to capture IgE and form antibody/IgE/aptamer-AgNP complex. The signal was further enhanced by reductive silver deposition creating a pattern of dark spots, which were localized and quantified by an array scanner. The method was able to detect IgE down to ca. 20 ng/mL (105 pM) in a cost effective, easy-to-use manner [102] .

An interesting AuNP aggregation mechanism introduced by Wu et al. [103] is based on marked conformational changes induced by the IgE binding to the AuNP confined aptamer strands. Generally, the DNA-modified AuNPs are very stable in solution due to the electrostatic repulsion of their negatively charged surfaces and this stabilizing effect persists even at high ionic strengths. In case of IgE aptamers, however, a salt induced aggregation can readily occur due to intermolecular hybridization of the AuNP modifying aptamer strands that was called hairpin aptamer sticky-end pairing effect by the authors. Upon IgE binding, the change in the aptamer conformation prevents/disrupts this interparticle hybridization event and as such the aggregation of the nanoparticles even at high concentrations. Since the aggregated and non-aggregated forms of the aptamer-modified AuNPs have markedly different colors, the method provides sensitive means for IgE detection down to ca. 20 pM LOD with wide linear range ( Figure 6A ). An innovative alternative to this method used a short single-stranded DNA non-covalently attached to the surface of AuNPs to protect them from aggregation, i.e., in the absence of IgE the capture probes kept the stability of the particles [104] . An elongated aptamer probe was designed such that the elongation was able to hybridize to the loop structure of the aptamer, creating a pseudoknot aptamer. In the presence of IgE, the pseudoknot strand dehybridized from the loop region of the aptamer and hybridized to the capture probe, leaving the surface of the AuNP unprotected, as indicated by the aggregation of the gold nanoparticles ( Figure 6B ). The shift of the absorbance spectra from red to blue depending of IgE concentration resulted in a 0.2 nM LOD. A lateral flow sandwich assay was developed for colorimetric determination of IgE using a chemically-modified bacteriophage [106] . In vivo biotinylated peptide (AviTag) was fused to the tail pIII protein of M13 phage to link the biotinylated IgE aptamer through neutravidin. Additionally, the pVIII core protein was covalently modified with HRP to catalyze the oxidation of TMB (3′,3,5,5′tetramethylbenzidine) for colorimetric detection. The lateral flow assay contained anti-IgE at the test line, which ensured the selective recognition of IgE, whereas at the control line anti-M13 antibodies were immobilized. With the modified bacteriophage a limit of detection, 0.68 pM was reached. A lateral flow sandwich assay was developed for colorimetric determination of IgE using a chemically-modified bacteriophage [106] . In vivo biotinylated peptide (AviTag) was fused to the tail pIII protein of M13 phage to link the biotinylated IgE aptamer through neutravidin. Additionally, the pVIII core protein was covalently modified with HRP to catalyze the oxidation of TMB (3 ,3,5,5 -tetramethylbenzidine) for colorimetric detection. The lateral flow assay contained anti-IgE at the test line, which ensured the selective recognition of IgE, whereas at the control line anti-M13 antibodies were immobilized. With the modified bacteriophage a limit of detection, 0.68 pM was reached.

Most of the surface plasmon resonance measurements aimed at the determination of the binding kinetics, affinity and selectivity of the IgE aptamers. One of the best studied IgE aptamers in this respect is the D17.4 IgE aptamer (Table 8) , introduced by Wiegand et al. [7] . The dissociation equilibrium constant for the full length IgE protein shows at first sight a very high variation with values ranging between 320 pM and 270 nM ( Table 9 ). This variation reveals in fact how sensitive is the aptamer-target interaction to the immobilization conditions, probe design and experimental conditions, i.e.., the immobilized terminus of the aptamer, the length of the linker between the surface of the supporter and the stem-loop structure, the surface chemistry and the surface density of the immobilized aptamer are all factors that need to be considered. It seems that on average the dissociation equilibrium coefficient of the IgE-aptamer complex is higher if the aptamer is immobilized to the surface through the 5 end than the 3 end. The published immobilization methods for this aptamer are very diverse but conclude on the importance of a mixed layer for appropriately large spatial separation of the aptamers. This was achieved for instance by co-immobilization of carboxyl capped and uncapped polyethyleneglycol chains followed by EDC/NHS activation of the amino-labeled aptamers [107, 108] or by using streptavidin-biotin interaction with biotin-labeled aptamers [109, 110] . In addition, direct immobilization of the thiol-modified aptamers on the gold surface in a mixed monolayer with cysteamine or thiol-modified alcohols can also be used, in one-or multi-step reactions [111] [112] [113] [114] [115] . The effect of the solution composition that should generally approach the selection conditions and particularly the Mg 2+ concentration has also enormous influence on the equilibrium dissociation constant. Wiegand and his co-workers analyzed the D17.4 aptamer-full length IgE interaction in modified PBS buffer (PBS adjusted with 1 mM MgCl 2 ) [7] , however in subsequent studies various other buffers were used, e.g., tris(hydroxyamino)-methane [107, 110] , HEPES [109, 116] and PBS [111, 113, 114] without Mg 2+ ions. As indicated in Table 9 , when Mg 2+ have been added to the working buffer [108, 112, 115] , the K D value was under 5 nM, while, in the absence of Mg 2+ , it was a few tens of nM. To understand the kinetics also in terms of aptamer surface density a rapid and convenient assessment method based on a single injection of hexamine-ruthenium (III) solution [115] was developed. The ruthenium complex in appropriate conditions associates to the aptamer strands by electrostatic interaction fully compensating their negative charge. Thus, the surface density of aptamers can be calculated from the amount of the bound cationic complex and stoichiometry of the binding reaction. By this, the optimal conditions of the heterogeneous aptamer-IgE interaction could be revealed and accurately quantified to avoid molecular crowding within the sensing layer but preserve appropriate sensitivity. [115] To enhance the sensitivity of the SPR measurements, nanoparticle-based (e.g., gold) amplification methods have been most often applied with two main variation of the sandwich assay: (i) using immobilized anti-IgE capture antibody and following the IgE binding by addition of the tracer aptamer-modified gold nanoparticles ( Figure 7A ); and (ii) using an immobilized capture aptamer and revealing the binding of IgE by anti-IgE-modified nanoparticles ( Figure 7B ). Using gold nanospheres according to method (i) improved the limit of detection of the amplification-free SPR detection to 0.001 µg/mL (5.3 pM) [117] . However, Kim et al. compared the two different methods and found, that using the aptamer/IgE/anti-IgE succesion (i) resulted in 10-fold improvement in the LOD (1 fM) compared to the second methodology [113] . The limit of detection was further improved by replacing the anti-IgE-modified gold nanospheres with gold nanorods (1 aM) due to the plasmonic coupling between the nanorod and the gold film on the substrate [118] . [115] 8 The bold letters indicate the original sequence, which was selected by Wiegand et al. [7] .

To enhance the sensitivity of the SPR measurements, nanoparticle-based (e.g., gold) amplification methods have been most often applied with two main variation of the sandwich assay: (i) using immobilized anti-IgE capture antibody and following the IgE binding by addition of the tracer aptamer-modified gold nanoparticles ( Figure 7A ); and (ii) using an immobilized capture aptamer and revealing the binding of IgE by anti-IgE-modified nanoparticles ( Figure 7B ). Using gold nanospheres according to method (i) improved the limit of detection of the amplification-free SPR detection to 0.001 µg/mL (5.3 pM) [117] . However, Kim et al. compared the two different methods and found, that using the aptamer/IgE/anti-IgE succesion (i) resulted in 10-fold improvement in the LOD (1 fM) compared to the second methodology [113] . The limit of detection was further improved by replacing the anti-IgE-modified gold nanospheres with gold nanorods (1 aM) due to the plasmonic coupling between the nanorod and the gold film on the substrate [118] . 

In general, fluorescence provides excellent sensitivity and LOD along with high-throughput analysisusing microarray technology. Aptamer strands are typically immobilized onto the surface of glass slides, e.g., the glass slide is modified with avidin followed by the immobilization of the biotinylated aptamers [119] or the amino-modified aptamer are linked through glutaraldehyde to amino-silanized surface [120] . The surface immobilization procedure and the proper binding buffer selection could be determined by fluorescence [119] or using 32 P radiolabeled aptamers [120] . A more sophisticated method for signaling on glass support was reported based on the use of poly(diacetylene) (PDA) liposomes, which exhibit a colorimetric transition in response to a wide range of stimulations, including ligand-receptor binding on its surface. Thus, after the surface of the liposomes were modified with aptamers, the selective recognition of the IgE resulted in shear stress and consequently fluorescence signal increase that could be further amplified by addition of polyclonal anti-IgE antibodies to reach an LOD of 0.01 ng/mL (53 fM) ( Figure 8A ) [121] . This could be further improved by Li and his co-workers using ultrasensitive metal enhancement fluorescence (MEF)-based detection of IgE with an LOD of 211 fM ( Figure 8B ) [122] . To this end, two sets of silver nanoparticles (AgNPs) were modified with a mixture of three different nucleic acid strands, i.e., the aptamer, a fluorescent Cy3-labeled oligoA strand and oligos that were complementary to each other on the two sets of AgNPs. The assay was carried out on an anti-IgE-modified glass (through aldehyde coupling). After IgE binding to the immobilized antibody, the nanoparticle aggregates, formed by the hybridization of the two complementary oligos, were attached to the surface via the selective 

In general, fluorescence provides excellent sensitivity and LOD along with high-throughput analysisusing microarray technology. Aptamer strands are typically immobilized onto the surface of glass slides, e.g., the glass slide is modified with avidin followed by the immobilization of the biotinylated aptamers [119] or the amino-modified aptamer are linked through glutaraldehyde to amino-silanized surface [120] . The surface immobilization procedure and the proper binding buffer selection could be determined by fluorescence [119] or using 32 P radiolabeled aptamers [120] . A more sophisticated method for signaling on glass support was reported based on the use of poly(di-acetylene) (PDA) liposomes, which exhibit a colorimetric transition in response to a wide range of stimulations, including ligand-receptor binding on its surface. Thus, after the surface of the liposomes were modified with aptamers, the selective recognition of the IgE resulted in shear stress and consequently fluorescence signal increase that could be further amplified by addition of polyclonal anti-IgE antibodies to reach an LOD of 0.01 ng/mL (53 fM) ( Figure 8A ) [121] . This could be further improved by Li and his co-workers using ultrasensitive metal enhancement fluorescence (MEF)-based detection of IgE with an LOD of 211 fM ( Figure 8B ) [122] . To this end, two sets of silver nanoparticles (AgNPs) were modified with a mixture of three different nucleic acid strands, i.e., the aptamer, a fluorescent Cy3-labeled oligoA strand and oligos that were complementary to each other on the two sets of AgNPs. The assay was carried out on an anti-IgE-modified glass (through aldehyde coupling). After IgE binding to the immobilized antibody, the nanoparticle aggregates, formed by the hybridization of the two complementary oligos, were attached to the surface via the selective aptamer-IgE interaction. The MEF enhanced fluorescence resulted from the the emission resonance of Cy3 molecules coupled to the broader localized surface plasmon (LSP) of AgNP aggregates was detected using a fluorescence scanner. The method could be simplified to one set of nanoparticles and the signal enhancement could be achieved by catalytic silver deposition, however at the expense of a lower sensitivity ( Figure 8C ) [123] . In all cases, the metal enhancement fluorescence needed proper optimization of the distances between particles and fluorophores. In this respect, an exceptionally wide linear range was achieved with a rigid structure-based MEF method, when silver nanoparticles were modified with aptamer strand co-immobilized with an "indifferent" nucleic acid strand of a specified length ( Figure 8D ). The complementary, fluorescent-labeled strand could hybridize to the nanoparticle and a rigid duplex was provided, where the distance between the particle and the fluorophore is well controlled [124] . Several homogenous light switching methods were developed as compiled in Table 11 . Since there is no need for the separation of bound and unbound fractions of the reporter molecule, the automatization of the detection processes is typically simpler and the inherent properties of the nucleic acid aptamers can be very effectivel y exploited. A relevant example is based on the use of a [Ru(phen)2(dppz)] 2+ complex as indicator of the aptamer-IgE binding. The ruthenium complex is able to intercalate in the double stranded region of the aptamer in the absence of IgE. However, in the presence of IgE, the structure of the aptamer changes owing to the target-aptamer interaction, that triggers a luminescent signal change [128] . Of note, the generality of this method is restricted by the necessity to have a double stranded stem region in the aptamer structure that is "untied" upon target binding. This was circumvented by using an internal modification of the aptamer with 2aminopurine (2AP) nucleotide analogs, where the fluorescence quantum yield depends on the base stacking interaction between 2AP and its neighbors. Thus, if the aptamer undergoes a conformation transition upon target binding, this can result in a fluorescent signal change. This strategy may provide quantitative and qualitative information regarding of the nature of the binding without any additional nucleic acid strands [129] .

A method with wide applicability was published by He et al. where a mixture of fluorescentand quencher-labeled nucleic acid strands were able to hybridize to IgE aptamers in the absence of the target molecule bringing the labels in close proximity, which results in a very low fluorescence backgorund signal. However, when the aptamer binds to IgE, the two probes are distanced to result in an intense fluorescence signal allowing for ca. 57 pM LOD [130] .

A 5 pM limit of detection was achieved with allostery-triggered enzymatic recycling amplification, and the system was able to detect IgE with proper sensitivity, even in complex biological samples. The universal strategy was investigated with endonuclease-based targettriggered signal amplification with IgE aptamer. The highly complex sensing method ensured IgE determination in a wide dynamic concentration range [131] . Another enzymatic method was developed based on a multicomponent G-quadruplex and monopyrene-based system, where 95.4 fM LOD was achieved using the digestion by S1 nuclease that differentiates between double stranded Cheap, disposable, paper-based aptasensor was developed using luminescence resonance energy transfer (LRET). Yb and, Er upconverting nanoparticles (UCNPs) modified with the IgE aptamer served as energy donor in the immunoassay, whereas carbon nanoparticles (CNPs) served as energy acceptors. In the absence of the IgE molecules, CNPs were held in the close proximity of the UCNP by π-π stacking interaction between the bases of the nucleic acid strands and the CNPs. This resulted in a quenching of the luminescence signal. However, in the presence of the IgE, the π-π stacking interaction was disrupted that triggered the luminescence signal from the UCNP ( Figure 8E ) [125] . The analytical performance parameters of the heterogeneous fluorescent assays are summarized in Table 10 . Table 10 . Analytical parameters of heterogeneous fluorescent assays for IgE determination.

Linear Range (pm)

Aptamer-modified poly(di-acetylene) supramolecules ( Figure 8A ) 5.3-5260 0.53 [121] Fluorescence enhancement by silver nanoparticle hybrid probes ( Figure 8B ) 2.6-5260 0.21 [122] Metal-enhanced fluorescence with silver nanostructures ( Figure 8C ) 2.6-84 1.4 [123] Metal-enhanced fluorescent probes based on silver nanoparticles ( Figure 8D ) 53-32,900 5.3 [124] Paper-supported aptasensor based on luminescence resonance energy transfer using upconverting nanoparticles ( Figure 8E ) 2.6-420 NA [125] Non-stripping gold nanoparticles triggered chemiluminescence ( Figure 8F ) 0.2-1000 0.05 [126] Fluorescence quenching by graphene oxide 60-225 22 [127] Several homogenous light switching methods were developed as compiled in Table 11 . Since there is no need for the separation of bound and unbound fractions of the reporter molecule, the automatization of the detection processes is typically simpler and the inherent properties of the nucleic acid aptamers can be very effectivel y exploited. A relevant example is based on the use of a [Ru(phen) 2 (dppz)] 2+ complex as indicator of the aptamer-IgE binding. The ruthenium complex is able to intercalate in the double stranded region of the aptamer in the absence of IgE. However, in the presence of IgE, the structure of the aptamer changes owing to the target-aptamer interaction, that triggers a luminescent signal change [128] . Of note, the generality of this method is restricted by the necessity to have a double stranded stem region in the aptamer structure that is "untied" upon target binding. This was circumvented by using an internal modification of the aptamer with 2-aminopurine (2AP) nucleotide analogs, where the fluorescence quantum yield depends on the base stacking interaction between 2AP and its neighbors. Thus, if the aptamer undergoes a conformation transition upon target binding, this can result in a fluorescent signal change. This strategy may provide quantitative and qualitative information regarding of the nature of the binding without any additional nucleic acid strands [129] .

A method with wide applicability was published by He et al. where a mixture of fluorescentand quencher-labeled nucleic acid strands were able to hybridize to IgE aptamers in the absence of the target molecule bringing the labels in close proximity, which results in a very low fluorescence backgorund signal. However, when the aptamer binds to IgE, the two probes are distanced to result in an intense fluorescence signal allowing for ca. 57 pM LOD [130] .

A 5 pM limit of detection was achieved with allostery-triggered enzymatic recycling amplification, and the system was able to detect IgE with proper sensitivity, even in complex biological samples. The universal strategy was investigated with endonuclease-based target-triggered signal amplification with IgE aptamer. The highly complex sensing method ensured IgE determination in a wide dynamic concentration range [131] . Another enzymatic method was developed based on a multicomponent G-quadruplex and monopyrene-based system, where 95.4 fM LOD was achieved using the digestion by S1 nuclease that differentiates between double stranded and single stranded DNA strands [132] .

Fluorescence anisotropy-based methods have also been developed for IgE detection and optimized in terms of the fluorescent label, length of the linker, ionic strength, concentration of divalent cations and temperature. Gokulrangan et al. found that the type of the fluorophore influences more the sensitivity of the assay through its local motion then the length its linker [133] . The proximity of the fluorescent dye is especially important for the sensitivity of fluorescent anisotropy assays. When it was in close proximity to the IgE molecule, much higher fluorescent polarization changes were observed, which is due to the restricted local rotation of the dye upon target binding. However, the position of modification has to be carefully selected, since the dye can also reduce the affinity of the aptamer towards its target [134] . The anisotropy measurements also led to more information on the aptamer-IgE binding in solution, apart from heterogeneous binding assays by SPR. The dissociation constant was found to be similarly influenced by the buffer composition. When the NaCl concentration was increased from 50 to 300 mM, a five-fold increase in the k D value was detected, which might be due to differences in the loop conformation, essential for the IgE binding. Moreover, it was shown that the Fc domain is positively charged, thereby the binding of the aptamer to IgE is partly based on electrostatic interaction which is significantly influenced by the ionic strength [135] . Increasing the temperature resulted in an apparent increase of the k D , since the conformational flexibility and the dye motion is in strong correlation with the temperature [133, 135] .

A possibility to increase the signal-to-noise ratio of homogeneous fluorescence-based assays is to minimalize the background signal corresponding for non-specific interaction by using antibody induced quenching. To this end, the IgE aptamer was modified with FITC (fluorescein isothiocyanate) in proximity to the target-binding pocket of the aptamer. In the absence of IgE, FITC-antibody could bind to the dye and efficiently quench its fluorescence and prohibit the non-specific interaction of proteins. In the presence of IgE, the aptamer binds to IgE by outcompeting the FITC-antibody and inducing fluorescent emission. The method can be multiplexed using different fluorophores with non-overlapping emission peaks, providing a robust, simple and high-throughput option [136] . Molecular Light Switch Complex 100-800 100 [128] Fluorescence enhancement using a DNA aptamer 92-37,000 57 [130] Amplification through allostery-triggered enzymatic recycling amplification NA 5 [131] Fluorescent oligonucleotide probe based on G-quadruplex scaffold for signal-on ultrasensitive protein assay 4.72-7560 0.095 [132] Fluorescence anisotropy 1000-60,000 350 [133] Fluorescence anisotropy assay NA 20 [134] Fluorescence protection assay 100-50,000 100 [136] Aptamer-barcode-based assay based on instantaneous derivatization chemiluminescence coupled to magnetic beads 4.88-20,000 4.6 [137] Competitive fluorescence quenching assay 350-35,000 170 [138] Rapid fluorescence detection of immunoglobulin E using an aptamer switch based on a binding-induced pyrene excimer NA 1600 [139] 6.1.

A label-free, switching-off type electrochemiluminescence biosensor was developed for sensitive detection of IgE. Petal-like CdS nanoparticles were deposited on the chitosan coated glassy carbon electrode, followed by a secondary layer of chitosan and gold nanoparticle deposition to enhance and ensure stable ECL signal, owing to the high ECL efficiency of the semi-conductor particles, good conductivity and the large electroactive surface as well as aptamer loading capacity of the gold nanoparticles. IgE aptamer was absorbed on the surface of the AuNPs to ensure the selective detection of IgE. When the target molecule is introduced, the ECL signal was highly suppressed, due to the inhibited diffusion of the ECL co-reactant toward the sensor surface. The achieved limit of detection was 80 fM and the label-free method was able to measure IgE concentration in human serumdown to 1 pM concentration [140] . A competitive, turn-on type sensor has also been developed based on enzyme induced biocatalytic precipitation (BCP). A complementary strand of the IgE aptamer was immobilized on the electrode surface (CdSe/ZnS quantum dots (QDs) functionalized MoS 2 ), while the aptamer along with HRP was attached to gold nanoparticles. In the absence of IgE, the nanoparticles by hybridization of the aptamer and the complementary strand attached to the electrode surface and the HRP catalyzed precipitation formation blocked the electrode surface and suppressed the ECL signal. However, the presence of IgE in the sample reduced the amount of surface bond gold nanoparticles by competition, i.e., the IgE-bound aptamers could not hybridize to the surface confined probe. This results in the reduction of the amount of precipitate formed at the electrode surface in an IgE concentration dependent manner. The process however overall leads to an increase in the ECL signal and this concept could be used to detect IgE in human serum at as low as 2 pM level, with an LOD of 180 fM in buffer solution [141] .

Electrochemical sensors by their easy miniaturization, simple and rapid detection of IgE are ideal candidates for the fabrication of PoC devices. The simplest and most cost-effective approaches are probably based on potentiometric transduction that are especially advantageous if realized on paper-based platform. In this respect, a potentiometric dot blot assay was proposed that is based on using the catalytic activity of gold nanoparticle-IgE aptamer conjugates ( Figure 9A ). Such nanoparticles catalyze the silver deposition on the IgE spots in a concentration dependent manner. The silver ions released by oxidative dissolution with H 2 O 2 were measured with a silver ion-selective electrode that allowed subsequent quantitation of the IgE [142] .

Amperometric measurements coupled with nanoparticle techniques have also been used to detect IgE with pyrroquinoline quinone glucose dehydrogenase (PQQGDH)-labeled aptamer strands. If an assay uses a labeled aptamer for the detection of the target molecule, the bound and unbound aptamers have to be distinguished, to eliminate false positive signals. Therefore, Fukasawa et al. developed a nanoparticle-based bound/free separation system, where complementary strands of the aptamer were immobilized on NeutrAvidin beads. In the absence of the IgE, the PQQGDH-modified aptamers could bind to its complementary strands on the beads, thereby no current change could be measured. However, in the presence of IgE, a stable aptamer-IgE complex was formed, since the stability of the aptamer-protein complex is higher than that of the aptamer-cDNA complex. While the unbound aptamer strands were trapped, the IgE-aptamer complexes were measured on the surface of a thin gold wire electrode based on the activity of the PQQGDH enzyme in the glucose containing buffer ( Figure 9B ) [143] . Although the LOD is relatively high (1 nM), the described method offers an appealing strategy to separate bound and unbound forms of a target.

One of the main benefits of electrochemical methods is the label-free transduction mechanisms. A relevant example is the use of polyaniline (PANI) nanowires covalently modified with aptamers for label-free, real-time, sensitive IgE detection based on relative conductance changes upon IgE binding. In the presence of IgE the conductance was increased, because the negatively charged IgE was specifically accumulated on the surface of the p-type nanowire blocked previously with BSA, a compulsory step to ensure applicability. However, the variation of the signal response was very considerable [144] , which might be due to the uncertainty of the covalent modification of the nanowire with aptamer and also the complexity of the sensing mechanism. The reproducibility of the approach was improved when polypyrrole nanowires were grown to incorporate the aptamers in one step. With the described method, the batch-to-batch variation of the sensors was significantly reduced along with benefits in terms of a faster response (~20 s) and LOD (10 pM) [145] .

Electrochemical impedance spectroscopy (EIS) also ensures label-free detection of IgE. Generally, the charge transfer resistance is measured, which scales with the bound protein, particularly IgE, to the aptamers confined at the electrode surface. The electrodes can be prepared conveniently by photolithography in the form of arrays, as shown by Xu et al. It was found, that in the case of EIS detection, the aptamers have genuine advantage over antibodies in terms of lowered background noise, minimal non-specific adsorption and larger relative signal ( Figure 9C ) [146] . Since the immobilization can influence the specific 3D structure of the aptamer, a DNA directed capture method was introduced to circumvent this problem. In the relevant proof of concept study, instead of directly immobilizing the aptamer onto the electrode surface, a complementary DNA to an elongated aptamer is immobilized, i.e., complementary to the terminal elongation of the aptamer so that the hybridization does not affect the IgE binding capability of the aptamer. For IgE measurements, the aptamer was then reacted with IgE in solution phase and the complex was captured by the complementary DNA ( Figure 9D ) [147] . In this detection method, steric hindrance should be largely avoided; moreover, after regeneration the same microfabricated array can be used for different target proteins, with the elongation of the respective aptamer strands coding the target protein. Contrary to the detections based on charge transfer resistance changes in the case of nanocrystalline diamond (NCD) electrodes, the binding of IgE to surface confined aptamers could be transduced via changes in the superficial capacity. With this approach, a ca. 3 orders of magnitude dynamic range and an LOD of 0.03 µg/mL (158 pM) was obtained. In addition, the sensor was highly selective for IgE even in the presence of large amount of IgG background and in human serum [148] .

Another type of electrochemical label-free methodology based on chemically-modified nanopores that could reach single molecule detection capability was introduced by the group of Gu. For this purpose, glass nanopores of ca. 60 nm were modified with aptamer strands that in case of nanoconfinements have clear advantages over antibodies in terms of their small size [149] . Measuring the ion current through the nanopore in an electrolyte solution showed clear blockade events upon IgE binding. As the ca. 11-nm-diameter protein molecule bound to the aptamer-modified inner wall of the nanopore, a volume equivalent of highly conductive electrolyte from the pore was excluded, resulting in a resistance increase and consequently transport current decrease. Due to the strong binding strength of IgE-aptamer complexes, each IgE molecule binding could be detected as a stepwise decrease in the registered current ( Figure 9E ). The step heights however continuously decreased as the number of bound IgEs in the nanopore increased owing to the smaller relative resistance change. While single molecule detection is paradoxically not always associated with very low LODs, which is a statistical quantity [150] , the method could be used for quantitative determinations based on the average time elapsed between the steps (at higher concentrations the duration between the steps is shorter) down to ca. 1 pM. However, the pre-filtration of the sample is required, since clogging can occur during measurement of complex samples. [142] ; amperometric (B) [143] ; array-based impedimetric (C,D) [146, 147] ; and nanopore-based (E) [149] detection schemes of IgE based on the use of D17.4 IgE aptamer.

Voltammetric measurements have widely been used for IgE by coupling with (bio)catalytic or redox labels in sandwich assays. Papamichael and coworkers developed an alkaline phosphatase enzyme (ALP)-based sandwich assay, where the antigen of IgE was immobilized onto an electrode surface followed by the binding of IgE, which enabled capping with the biotin-modified aptamer. Extravidin-alkaline phosphatase conjugate was further reacted with biotinylated aptamer, and then the IgE was quantified by enzyme hydrolyzed p-aminophenyl phosphate (p-APP) conversion to paminophenyl (p-AP), an electrochemically active product detected by differential pulse voltammetry (DPV) at the underlying electrode surface ( Figure 10A ) [151] . Similar sandwich assays were established by replacing the IgE antigen with a capture anti-IgE antibody. In this particular case, ascorbic acid 2-phosphate was used as a substrate hydrolyzed by ALP to ascorbic acid. In an attempt to increase the sensitivity, instead of detecting the ascorbic acid directly, its reducing properties were used to deposit metal silver from Ag + on the electrode surface detected by stripping voltammetry ( Figure 10B ). The amount of the accumulated silver scaled with the IgE concentration down to an LOD of 20 pM [152] . The versatility of these type of assays is demonstrated by the possibility to modify the electrode through gold nanoparticles with the aptamer and using ALP-labeled anti-IgE antibody as tracer ( Figure 10C ). The nanoparticle-modified electrode setup proved to have several advantages over the more conventional approaches and ultimately led to an LOD of 5 fM [153] .

An interesting example of using a self-reporting format that is apart from the majority of voltammetric methods that use a tracer affinity reagent was introduced by Li et al. An aptamer is used that is linked through a thiol label to a gold electrode while the other terminus is modified with an ALP. In the absence of IgE, the ALP converts 1-naphthyl phosphate (1-NP) to the electroactive naphthol, which is oxidized on the electrode surface. Interestingly, the IgE binding "buries" the enzyme and as such its catalytic activity is suppressed in an IgE concentration-dependent manner. Surprisingly, this relatively simple assay construct led to a remarkably good LOD of 22.7 fM [154] .

Such self-reporting approaches, in which the conformational switch of the aptamer triggers a signal, are more common using redox labels (most often methylene blue (MB)) that are approached or distanced from the electrode surface upon the selective target binding and as such turn-on or turnoff the current, respectively [155] . Apparently, the native IgE aptamer is not a good candidate for such an approach, as merely 2.5% current change was detected upon IgE binding despite the large size of the protein [156] . Thereby re-engineering of the aptamer was required by the destabilization of the hairpin structure ( Figure 10D ) [157] or by the elongation of the DNA producing a pseudoknot [142] ; amperometric (B) [143] ; array-based impedimetric (C,D) [146, 147] ; and nanopore-based (E) [149] detection schemes of IgE based on the use of D17.4 IgE aptamer.

Voltammetric measurements have widely been used for IgE by coupling with (bio)catalytic or redox labels in sandwich assays. Papamichael and coworkers developed an alkaline phosphatase enzyme (ALP)-based sandwich assay, where the antigen of IgE was immobilized onto an electrode surface followed by the binding of IgE, which enabled capping with the biotin-modified aptamer. Extravidin-alkaline phosphatase conjugate was further reacted with biotinylated aptamer, and then the IgE was quantified by enzyme hydrolyzed p-aminophenyl phosphate (p-APP) conversion to p-aminophenyl (p-AP), an electrochemically active product detected by differential pulse voltammetry (DPV) at the underlying electrode surface ( Figure 10A ) [151] . Similar sandwich assays were established by replacing the IgE antigen with a capture anti-IgE antibody. In this particular case, ascorbic acid 2-phosphate was used as a substrate hydrolyzed by ALP to ascorbic acid. In an attempt to increase the sensitivity, instead of detecting the ascorbic acid directly, its reducing properties were used to deposit metal silver from Ag + on the electrode surface detected by stripping voltammetry ( Figure 10B ). The amount of the accumulated silver scaled with the IgE concentration down to an LOD of 20 pM [152] . The versatility of these type of assays is demonstrated by the possibility to modify the electrode through gold nanoparticles with the aptamer and using ALP-labeled anti-IgE antibody as tracer ( Figure 10C ). The nanoparticle-modified electrode setup proved to have several advantages over the more conventional approaches and ultimately led to an LOD of 5 fM [153] .

An interesting example of using a self-reporting format that is apart from the majority of voltammetric methods that use a tracer affinity reagent was introduced by Li et al. An aptamer is used that is linked through a thiol label to a gold electrode while the other terminus is modified with an ALP. In the absence of IgE, the ALP converts 1-naphthyl phosphate (1-NP) to the electroactive naphthol, which is oxidized on the electrode surface. Interestingly, the IgE binding "buries" the enzyme and as such its catalytic activity is suppressed in an IgE concentration-dependent manner. Surprisingly, this relatively simple assay construct led to a remarkably good LOD of 22.7 fM [154] .

Such self-reporting approaches, in which the conformational switch of the aptamer triggers a signal, are more common using redox labels (most often methylene blue (MB)) that are approached or distanced from the electrode surface upon the selective target binding and as such turn-on or turn-off the current, respectively [155] . Apparently, the native IgE aptamer is not a good candidate for such an approach, as merely 2.5% current change was detected upon IgE binding despite the large size of the protein [156] . Thereby re-engineering of the aptamer was required by the destabilization of the hairpin structure ( Figure 10D ) [157] or by the elongation of the DNA producing a pseudoknot aptamer probe ( Figure 10E ) [158] . A ca. 20% change in the current was measured by square wave voltammetry (SWV), when destabilization of the stem region was carried out with substituting a G to T at position 30 with only a slight worsening of the equilibrium dissociation constant of IgE-modified aptamer complex with respect of the original sequence [157] . The pseudoknot-type aptamer probe led to even better results and reached an LOD of 60 pM. The specific aptamer contained a two-stem-loop structure, where a domain of the loop is hybridized to form the stem domain of the other and the two ends of the aptamer were modified with thiol and methylene blue for immobilization and electrochemical detection, respectively. In the absence of IgE, the rigid pseudoknot structure was stable, holding the redox label far from the electrode surface. However, in the presence of IgE, the rigid structure was opened, and the methylene blue was brought into close proximity of the electrode surface to allow direct electron transfer, which was measured by SWV. Moreover, the sensor was able to measure IgE concentration in human serum, as well [158] .

It is not required to chemically modify the aptamer with the methylene blue for electrochemical detection, since this cationic dye can bind to the G-rich sequence of the aptamer. This property of MB was used in a sandwich assay-based method, in which the anti-IgE-captured IgEs were capped with aptamer-modified gold nanoparticles. The high probe density on the gold nanoparticles led to an accumulation of the added MB that could be detected by DPV ( Figure 10F ). Obviously, an antibody is required as a capture probe to eliminate the background signal (MB is not able to bind to proteins). This approach claims an LOD of 0.52 ng/mL (2.7 pM) and a large dynamic range (1-10,000 ng/mL (5.3 pM-52.6 nM)) [159] . In contrast with the previous method, direct electrochemical detection could also be used, when aptamers were immobilized on carbon nanotube, ionic liquid and chitosan-modified electrode. The methylene blue was interacted with the guanine bases in the absence of the IgE producing a well-defined DPV peak. In the presence of IgE, the MB was released and the peak current was dropped. A 37 pM LOD was achieved, and the sensor was capable to detect IgE selectively even in human serum [160] . A similar "signal-off" method was used, when aptamers were immobilized on gold nanoparticles deposited on the electrode. In the absence on IgE, a long complementary DNA strand could hybridize to the aptamer where MB could incorporate into the G-rich regions detectable by SWV. In the presence of IgE, the cDNA was not able to hybridize to the aptamer strand, thereby the peak current was decreased. The sensor enabled to measure IgE from 1 pM to 100 nM with 0.16 pM LOD [161] .

Streptavidin functionalized and AgNP decorated graphene was used as a redox labeling in square wave anodic stripping voltammetry measurements. A sandwich immunoassay was built up for selective and sensitive detection of IgE with 3.6 ng/mL (19 pM) LOD.

On gold-coated screen-printed electrodes, thiol-modified aptamer strands were immobilized along with mercaptohexanol. Upon IgE binding, biotin-labeled anti-IgE antibody was able to hybridize followed by the binding of streptavidin-modified and AgNP-loaded graphene sheet. The signal amplification was ensured by the high loading capacity of AgNP on the graphene allowing the SWAV measurements of Ag + [162] .

The development of an antifouling sensing interface to allow for ultrasensitive and specific detection with voltammetry received also attention. Macroporous gold surface was prepared byelectrochemical gold deposition on multilayer polystyrene nanospheres followed by the removal of the nanospheres. Thiol-labeled aptamers and zwitterionic peptides were immobilized to prevent non-specific adsorption owing to its hydrophobicity, neutral charge and a well-defined secondary structure, which ensures closely packed monolayer. IgE prevents the electron transfer between the [Fe(CN) 6 ] 3−/4− and the electrode, thereby the peak current in DPV was significantly dropped and 42 fg/mL (0.22 fM) detection limit was achievable [163] . The macroporous gold could be changed with poly (m-aminobenzoic acid) (PABA) electrochemical deposited on the electrode surface followed by immobilization of the aptamer and the zwitterionic peptide [164] . [151] ; (B) [152] ; and (C) [153] ); conformational switching aptamers ((D) [157] ; and (E) [158] ); and methylene blue accumulation in the G-rich domain of the aptamer ((F) [159] ).

Given the large mass change upon binding IgE, capillary electrophoresis-based separation of the aptamer-IgE complex from free aptamers is readily possible. Moreover, the use of fluorescent-labeled aptamers made the detection by laser-induced fluorescence (CE-LIF) especially convenient. Such separations and detections can be carried out in ca. 1 min, with two well separated peaks corresponding to the free and IgE bound forms of fluorescent-labeled aptamer that enabled their quantitfication with five orders of magnitude dynamic range and 46 pM LOD [165] . Aspects to consider in CE-LIF are the use of appropriate labels that does not interfere with the target binding, which can be ensured by choosing an appropiate linker between the aptamer strand and the fluorophore or by changing the the position of the label. Clearly, the complex formation and the stability during separation is influenced by the buffer composition and the best sensitivity in complex detection was observed at the shortest separation time, although the increase of the electric field could cause the dissociation of the aptamer-target complex [166] . To enhance the binding affinity between the aptamer and the target molecule, a polyT extension on the 5′ end can be applied to gain wellisolated peak for the aptamer-IgE complex in CE-LIF with higher intensity at the same concentrations Figure 10 . Voltammetric measurements, including: ALP activity in sandwich assays ((A) [151] ; (B) [152] ; and (C) [153] ); conformational switching aptamers ((D) [157] ; and (E) [158] ); and methylene blue accumulation in the G-rich domain of the aptamer ((F) [159] ).

Given the large mass change upon binding IgE, capillary electrophoresis-based separation of the aptamer-IgE complex from free aptamers is readily possible. Moreover, the use of fluorescent-labeled aptamers made the detection by laser-induced fluorescence (CE-LIF) especially convenient. Such separations and detections can be carried out in ca. 1 min, with two well separated peaks corresponding to the free and IgE bound forms of fluorescent-labeled aptamer that enabled their quantitfication with five orders of magnitude dynamic range and 46 pM LOD [165] . Aspects to consider in CE-LIF are the use of appropriate labels that does not interfere with the target binding, which can be ensured by choosing an appropiate linker between the aptamer strand and the fluorophore or by changing the the position of the label. Clearly, the complex formation and the stability during separation is influenced by the buffer composition and the best sensitivity in complex detection was observed at the shortest separation time, although the increase of the electric field could cause the dissociation of the aptamer-target complex [166] . To enhance the binding affinity between the aptamer and the target molecule, a polyT extension on the 5 end can be applied to gain well-isolated peak for the aptamer-IgE complex in CE-LIF with higher intensity at the same concentrations compared to the original method [167] . Alternative detection methods include chemiluminescence [168] or PCR [169] involving additional reagents after the separation was performed, thus less convenient than the fluorescence-based detection, but higher sensitivities while still low overall analysis times was offered, e.g., in the case of chemiluminescence detection with an analysis time of 5 min, an LOD in the fM range was achieved [168] .

Microfluidic CE devices have also been fabricated since they have several advantages over conventional CE including reduced reagent necessity, minimized cost and analysis time, thereby they show excellent prospects for aptamer-based protein detection coupled with electrophoresis. Wide range of microfluidic devices were used including gel-shift detection platform incorporating competitive inhibition strategy [170] , DNA mobility shift assay [171] and frontal analysis [172] . Since the aptamer-IgE complex is difficult to measure with conventional methods-due the slow migration of the complex-free flow electrophoresis (FFE) was applied with fast measurements and accurate results [173, 174] , i.e., in FFE, the sample is progressed by pressure driven flow and the electrical field applied perpendicularly to the direction of the flow only deviates the various components based on their mass/charge ratio from their linear trajectory. Perhaps, the best analytical performance has been achieved with a homogeneous mobility shift assay employing a complex amplification mechanism. The relatively low affinity of aptamer-IgE complexes that could lead to their dissociation during separation was circumvented by continuous sample injection to shift the equilibrium towards complex formation coupled with an electrokinetic concentration for a continuous signal amplification and to minimize band dispersion by self-focusing. The lab-on-chip device was able to detect 4.4 and 39 pM IgE in buffer and 10% serum, respectively [175] .

In this review, the current state of the art in immunoglobulin specific aptamer-based biosensors is compiled. The main uses of the aptamers selected for immunoglobulins are very broad and include: (i) affinity purification; (ii) reporting molecules replacing secondary antibodies; and (iii) selective capturing or detecting reagents. In terms of affinity purification, their high, but easily controllable, affinity makes them suited for the purification of antibodies under mild conditions to preserve the activity of the antibodies.

This compilation shows a clear dominance of the aptamer-based detection of IgE as compared with other immunoglobulin targets. This is by far not justified by the diagnostic importance of IgE as compared with other immunoglobulins, but, given the excellent affinity and selectivity of IgE aptamers, by their use as a convenient model to develop new detection concepts and analytical platforms. Many of these detection concepts exploit the intrinsic properties of the nucleic acid aptamers that show appealing advantages and versatility compared to antibody-based reagents and as such they might provide a useful snapshot on the general possibilities in this field. Particularly, the amenability of aptamer reagents for PCR amplification and their negative charge opened new detection routes hardly possible by conventional immunoassays. While aptamers in the present report routinely enabled subnanomolar LODs, the innovative use of their properties led to LODs in the fM range.

Despite all their claimed advantages, the use of aptamers as diagnostic reagents for antibody determinations still strikingly lags behind that of the conventionally used reagents. Presently, the standard diagnostic methodologies targeting immunoglobulin biomarkers are largely based on antibodies. Thus, infection-generated IgG and IgM are detected from serum and plasma samples by sandwich ELISA or lateral flow immunoassays; the detection of the extraordinary IgG antibody expression caused by cancer and autoimmune disease is determined by sandwich immunoassays [176] ; and conventional determinations of IgE also employ antibody-based sandwich ELISA, RAST (Radio Allergo-Sorbent Test in serum) or immunoblot tests [51] .

Indeed, aptamers, beside their many advantages, also have some drawbacks starting from the inherently probabilistic nature of the selection processes, which cannot guarantee that sufficiently high affinity aptamers, fully lacking of cross-reactivity to coexistent species in complex sample matrices, such as whole blood, serum, saliva, etc., can be delivered. The large negative charge density and lack of hydrophobic moieties in the case of natural nucleic acid aptamers are also rather prohibitive in recognizing either negatively charged or hydrophobic immunoglobulin epitopes. In terms of integration in sensor platforms, as their structure is more flexible and as such susceptible to environmental conditions (pH, ionic strength, degradation by nucleases), the immobilization, chemical modification and the medium in which the assay is performed need more consideration than in the case of antibody-based reagents.

However, the advances in the field have largely addressed these drawbacks. Most importantly, the implementation of non-natural nucleic acids diversified the range of non-covalent interactions, increased the success rate of the selection (making it also less dependent on the target) and provided nuclease resistance. The IgA aptamer presented is a relevant example in this respect. The counter-selection emerged also as a powerful tool to custom adjust the selectivity of the aptamers for the application, by removing those sequences that bind to critical interferences and matrix components.

Overall, the number of methodologies for selection, control and screening seems up to the challenge of generating aptamer-based diagnostic reagents for antibodies, admittedly at the expense of a more complex and costly selection process. However, this is perhaps a small price to pay given the benefits in terms of their chemical synthesis (solely based on the knowledge of the nt sequence), accordingly batch-to-batch consistency, excellent temperature and biochemical stability ideal for integration in long shelf-live cartridges, and the overall versatility of nucleic acid chemistry in terms of controlled labeling. Funding: The research reported in this paper was supported by the BME Nanotechnology and Materials Science TKP2020 IE grant of NKFIH Hungary (BME IE-NAT TKP2020).

The authors declare no conflict of interest.

In vitro selection of RNA molecules that bind specific ligands

Systematic evolution of ligands by exponential enrichment: RNA ligands to bacteriophage T4 DNA polymerase

High-resolution molecular discrimination by RNA

Spiegelmer-Based Sandwich Assay for Cardiac Troponin I Detection

Target replacement strategy for selection of DNA aptamers against the Fc region of mouse IgG

Rabbit antibody detection with RNA aptamers

High-affinity oligonucleotide ligands to human IgE inhibit binding to Fc epsilon receptor I

In Vitro Evolution of Functional DNA Using Capillary Electrophoresis

In Vitro Selection of High-Affinity DNA Ligands for Human IgE Using Capillary Electrophoresis

Isolation of DNA aptamers using micro free flow electrophoresis

Aptamer-Based Sensitive Detection of Target Molecules via RT-PCR Signal Amplification

Selection of aptamers with high affinity and high specificity against C595, an anti-MUC1 IgG3 monoclonal antibody, for antibody targeting

RNA Aptamer against Autoantibodies Associated with Multiple Sclerosis and Bioluminescent Detection Probe on Its Basis

Bioluminescent aptamer-based sandwich-type assay of anti-myelin basic protein autoantibodies associated with multiple sclerosis

Dual-Aptamer-Based Biosensing of Toxoplasma Antibody

Waga, I. Fluorescence Polarization-Based Rapid Detection System for Salivary Biomarkers Using Modified DNA Aptamers Containing Base-Appended Bases

Structural and molecular basis for hyperspecificity of RNA aptamer to human immunoglobulin G

Single-stranded DNA aptamer targeting and neutralization of anti-D alloantibody: A potential therapeutic strategy for haemolytic diseases caused by Rhesus alloantibody

Anti-Fab Aptamers for Shielding Virus from Neutralizing Antibodies

Aptamers as quality control tool for production, storage and biosimilarity of the anti-CD20 biopharmaceutical rituximab

Microfluidic Selex Using Free Solution Electrokinetics

Isolation of thermally sensitive protein-binding oligonucleotides on a microchip

Nucleic Acid Isolation and Enrichment on a Microchip

Integrated Microfluidic Isolation of Aptamers Using Electrophoretic Oligonucleotide Manipulation

Selection of Aptamers for Molecular Recognition and Characterization of Cancer Cells

Ligand-Guided Selection of Target-Specific Aptamers: A Screening Technology for Identifying Specific Aptamers Against Cell-Surface Proteins

Mirror-image RNA that binds D-adenosine

Aptamer-based multiplexed proteomic technology for biomarker discovery

Combinatorial Selection, Inhibition, and Antiviral Activity of DNA Thioaptamers Targeting the RNase H Domain of HIV-1 Reverse Transcriptase

X-aptamers: A bead-based selection method for random incorporation of druglike moieties onto next-generation aptamers for enhanced binding

Methods of X-Aptamer Generation and Compositions Thereof

Autoantibody-Based Diagnostic Biomarkers: Technological Approaches to Discovery and Validation

Antibodies as Diagnostic Targets and as Reagents for Diagnostics

In Vitro Diagnostic Assays for COVID-19: Recent Advances and Emerging Trends

IgE in allergy and asthma today

Immunoglobulin E in health and disease

Immunogloblin deficiency syndromes and therapy

Primary immunodeficiencies: 2009 update

Usage of cancer associated autoantibodies in the detection of disease

Salivary Biomarkers and Training Load During Training and Competition in Paralympic Swimmers

Elevated Serum IgG Levels Positively Correlated with IL-27 May Indicate Poor Outcome in Patients with HBV-Related Acute-On-Chronic Liver Failure

Immunoglobulin levels amongst persons with and without human immunodeficiency virus type 1 infection in Uganda and Norway

Correlation of low serum IgM levels with absence of functional splenic tissue in sickle cell disease syndromes

Serum concentration of 19 serum proteins in Crohn's disease and ulcerative colitis

Total and specific immunoglobulin E in induced sputum in allergic and non-allergic asthma

Impact of high serum Immunoglobulin E levels on the risk of atherosclerosis in humans

High Serum IgE Concentration in Patients with Psoriasis

Factors Influencing Serum Concentrations of Immunoglobulin D in the Adult Population: An Observational Study in Spain

IgE allergy diagnostics and other relevant tests in allergy, a World Allergy Organization position paper. World Allergy Organ

Performance evaluation of salivary amylase activity monitor

The IgA system: A comparison of structure and function in different species

Aptamer Directly Evolved from Live Cells Recognizes Membrane Bound Immunoglobin Heavy Mu Chain in Burkitt's Lymphoma Cells

A multivalent DNA aptamer specific for the B-cell receptor on human lymphoma and leukemia

A new branched proximity hybridization assay for the quantification of nanoscale protein-protein proximity

Spatially marking and quantitatively counting membrane immunoglobulin M in live cells via Ag cluster-aptamer probes

Live-Cell Labeling of Specific Protein Glycoforms by Proximity-Enhanced Bioorthogonal Ligation

Combined aptamer and transcriptome sequencing of single cells

Structural optimization of an aptamer generated from Ligand-Guided Selection (LIGS) resulted in high affinity variant toward mIgM expressed on Burkitt's lymphoma cell lines

Ligand Guided Selection (LIGS) of Artificial Nucleic Acid Ligands against Cell Surface Targets

Dimerization of an aptamer generated from Ligand-guided selection (LIGS) yields a high affinity scaffold against B-cells

Cation-dependent transition between the quadruplex and Watson-Crick hairpin forms of d(CGCG3GCG)

Parallel and antiparallel G-DNA structures from a complex telomeric sequence

Thermodynamic and kinetic characterization of the dissociation and assembly of quadruplex nucleic acids

Alkaline-tolerant RNA aptamers useful to purify acid-sensitive antibodies in neutral conditions

RNA aptamer-based optical nanostructured sensor for highly sensitive and label-free detection of antigen-antibody reactions

Aptamer-Directed Conjugation of DNA to Therapeutic Antibodies

Antibody-specific aptamer-based PCR analysis for sensitive protein detection

Quantitative and sensitive protein detection strategies based on aptamers

Signal Enhancement of Silicon Nanowire Field-Effect Transistor Immunosensors by RNA Aptamer

Conformational plasticity of RNA for target recognition as revealed by the 2.15 Å crystal structure of a human IgG-aptamer complex

Crystallization and preliminary X-ray diffraction studies of an RNA aptamer in complex with the human IgG Fc fragment

Binding interaction analysis of RNA aptamer-Fc region of human immunoglobulin G using fragment molecular orbital calculation

Signal changes for dye-complexed biomolecular interactions on waveguide-sensor chips

Characterisation of Antibody-Binding RNAs Selected from Structurally Constrained Libraries

Aptamer-facilitated Protection of Oncolytic Virus from Neutralizing Antibodies

Throughput Bioanalysis of Bevacizumab in Human Plasma Based on Enzyme-Linked Aptamer Assay Using Anti-Idiotype DNA Aptamer

Single-strained DNA aptamers mask RhD antigenic epitopes on human RhD+ red blood cells to escape alloanti-RhD immunological recognition

Anti-Idiotype DNA Aptamer Affinity Purification-High-Temperature Reversed-Phase Liquid Chromatography: A Simple, Accurate, and Selective Bioanalysis of Bevacizumab

Specific modulation of the anti-DNA autoantibody-nucleic acids interaction by the high affinity RNA aptamer

Aptamer Neutralization of Beta1-Adrenoceptor Autoantibodies Isolated From Patients With Cardiomyopathies

Neutralization of pathogenic beta1-receptor autoantibodies by aptamers in vivo: The first successful proof of principle in spontaneously hypertensive rats

Aptamers that Inhibit Interaction Between Antibody and 2nd Extracellular Loop of Human Beta-1-Adrenergic Receptor; EP 2 588 115 B1

The First Aptamer-Apheresis Column Specifically for Clearing Blood of β1-Receptor Autoantibodies-A Successful Proof of Principle Using Autoantibody-Positive SHR Rats

Use of Aptamers in Therapy and/or Diagnosis of Autoimmune Diseases

The aptamer BC 007 for treatment of dilated cardiomyopathy: Evaluation in Doberman Pinschers of efficacy and outcomes

A Three-Part, Randomised Study to Investigate the Safety, Tolerability, Pharmacokinetics and Mode of Action of BC 007, Neutraliser of Pathogenic Autoantibodies Against G-Protein Coupled Receptors in Healthy, Young and Elderly Subjects

Aptamer BC007 for neutralization of pathogenic autoantibodies directed against G-protein coupled receptors: A vision of future treatment of patients with cardiomyopathies and positivity for those autoantibodies

Selection of an RNA molecule that mimics a major autoantigenic epitope of human insulin receptor

Isolation of a nuclease-resistant decoy RNA that selectively blocks autoantibody binding to insulin receptors on human lymphocytes

Isolation of a nuclease-resistant decoy RNA that can protect human acetylcholine receptors from myasthenic antibodies

In vitro Selection of the 2 -Fluoro-2 -Deoxyribonucleotide Decoy RNA Inhibitor of Myasthenic Autoantibodies

Improvement of RNA Aptamer Activity against Myasthenic Autoantibodies by Extended Sequence Selection

Prevention of passively transferred experimental autoimmune myasthenia gravis by an in vitro selected RNA aptamer

Sequence and Structural Features of RNA Aptamer Against Myasthenic Autoantibodies

Detection of immunoglobulin E using an aptamer based dot-blot assay

A peroxidase-active aptazyme as an isothermally amplifiable label in an aptazyme-linked oligonucleotide assay for low-picomolar IgE detection

Self-Assembly of Functional Nucleic Acid-Based Colorimetric Competition Assay for the Detection of Immunoglobulin E

Label-free homogeneous detection of immunoglobulin E by an aptameric enzyme subunit

Aptameric Enzyme Subunit for Biosensing Based on Enzymatic Activity Measurement

Visual microarray detection for human IgE based on silver nanoparticles

Inhibitory Effect of Target Binding on Hairpin Aptamer Sticky-End Pairing-Induced Gold Nanoparticle Assembly for Light-up Colorimetric Protein Assay

Label-free colorimetric aptasensor for IgE using DNA pseudoknot probe

Highly Stable Conjugates of Carbon Nanoparticles with DNA Aptamers

Aptamer-Phage Reporters for Ultrasensitive Lateral Flow Assays

Aptamer-based Surface Plasmon Resonance Probe

Exploring the sequence space of a DNA aptamer using microarrays

Aptamer biosensor for lable-free detection of human immunoglobulin E based on surface plasmon resonance

Fiber optic SPR biosensing of DNA hybridization and DNA-protein interactions

Characterizing the interaction between aptamers and human IgE by use of surface plasmon resonance

Monitoring of interactions between aptamers and human IgE by Surface Plasmon Resonance imaging

Ultra-sensitive detection of IgE using biofunctionalized nanoparticleenhanced SPR

Surface plasmon resonance imaging for affinity analysis of aptamer-Protein interactions with PDMS microfluidic chips

Finding the Optimal Surface Density of Aptamer Monolayers by SPR Imaging Detection-based Aptamer Microarrays

Probing the Force-Induced Dissociation of Aptamer-Protein Complexes

Aptamer-Au NPs conjugates-enhanced SPR sensing for the ultrasensitive sandwich immunoassay

Attomolar detection of protein biomarkers using biofunctionalized gold nanorods with surface plasmon resonance

Optimization of aptamer microarray technology for multiple protein targets

An Aptamer-Based Protein Biochip

The strategy of signal amplification for ultrasensitive detection of hIgE based on aptamer-modified poly(di-acetylene) supramolecules

Fluorescence Enhancement of Silver Nanoparticle Hybrid Probes and Ultrasensitive Detection of IgE

Highly Sensitive Detection of Proteins Based on Metal-Enhanced Fluorescence with Novel Silver Nanostructures

Metal-enhanced fluorescent probes based on silver nanoparticles and its application in IgE detection

A paper-supported aptasensor for total IgE based on luminescence resonance energy transfer from upconversion nanoparticles to carbon nanoparticles

Aptameric system for the highly selective and ultrasensitive detection of protein in human serum based on non-stripping gold nanoparticles

Aptasensor for amplified IgE sensing based on fluorescence quenching by graphene oxide

Signaling Aptamer/Protein Binding by a Molecular Light Switch Complex

Signaling Aptamers Created Using Fluorescent Nucleotide Analogues

Novel fluorescence enhancement IgE assay using a DNA aptamer

A universal amplified strategy for aptasensors: Enhancing sensitivity through allostery-triggered enzymatic recycling amplification

Fluorescent oligonucleotide probe based on G-quadruplex scaffold for signal-on ultrasensitive protein assay

Aptamer-Based Bioanalysis of IgE by Fluorescence Anisotropy

Directing a rational design of aptamer-based fluorescence anisotropy assay for sensitive detection of immunoglobulin E by site-specific binding study

Ensemble and single-molecule biophysical characterization of D17.4 DNA aptamer-IgE interactions

Fluorescence protection assay: A novel homogeneous assay platform toward development of aptamer sensors for protein detection

Aptamer-barcode based immunoassay for the instantaneous derivatization chemiluminescence detection of IgE coupled to magnetic beads

An Aptamer-Based Competitive Fluorescence Quenching Assay for IgE

Rapid fluorescence detection of immunoglobulin E using an aptamer switch based on a binding-induced pyrene excimer

Petal-like CdS nanospheres-based electrochemiluminescence aptasensor for detection of IgE with gold nanoparticles amplification

An electrochemiluminescence aptasensor based on CdSe/ZnS functionalized MoS2 and enzymatic biocatalytic precipitation for sensitive detection of immunoglobulin E

Towards Protein Assays on Paper Platforms with Potentiometric Detection

An Aptamer-Based Bound/Free Separation System for Protein Detection

Ultrasensitive protein detection using an aptamer-functionalized single polyaniline nanowire

Rapid real-time electrical detection of proteins using single conducting polymer nanowire-based microfluidic aptasensor

Label-Free Electrochemical Detection for Aptamer-Based Array Electrodes

A novel protein analytical method based on hybrid-aptamer and DNA-arrayed electrodes

Nanocrystalline diamond impedimetric aptasensor for the label-free detection of human IgE

Capturing Single Molecules of Immunoglobulin and Ricin with an Aptamer-Encoded Glass Nanopore

Nanosensors lost in space. A random walk study of single molecule detection with single-nanopore sensors

Viability of allergy (IgE) detection using an alternative aptamer receptor and electrochemical means

Electrochemical immunosensor with aptamer-based enzymatic amplification

Highly sensitive electrochemical detection of proteins using aptamer-coated gold nanoparticles and surface enzyme reactions

An electronic channel switching-based aptasensor for ultrasensitive protein detection

Electrochemical Aptasensors with Various Detection Strategies

On the Signaling of Electrochemical Aptamer-Based Sensors: Collision-and Folding-Based Mechanisms

Re-engineering aptamers to support reagentless, self-reporting electrochemical sensors

Aptamer Pseudoknot-Functionalized Electronic Sensor for Reagentless and Single-Step Detection of Immunoglobulin E in Human Serum

Aptamer-Au NPs conjugates-accumulated methylene blue for the sensitive electrochemical immunoassay of protein

Label-free electrochemical IgE aptasensor based on covalent attachment of aptamer onto multiwalled carbon nanotubes/ionic liquid/chitosan nanocomposite modified electrode

Sensitive label-free electrochemical analysis of human IgE using an aptasensor with cDNA amplification

Fabrication of streptavidin functionalized silver nanoparticle decorated graphene and its application in disposable electrochemical sensor for immunoglobulin E

Antifouling and ultrasensitive biosensing interface based on self-assembled peptide and aptamer on macroporous gold for electrochemical detection of immunoglobulin E in serum

One-step electrodeposition of poly(m-aminobenzoic acid) membrane decorated with peptide for antifouling biosensing of Immunoglobulin E

Aptamers as ligands in affinity probe capillary electrophoresis

Effect of buffer, electric field, and separation time on detection of aptamer-ligand complexes for affinity probe capillary electrophoresis

Enhancing the Affinity of Anti-Human α-Thrombin 15-mer DNA Aptamer and Anti-Immunoglobulin E Aptamer by PolyT Extension

Aptamer-based detection and quantitative analysis of human immunoglobulin E in capillary electrophoresis with chemiluminescence detection

Assay design considerations for use of affinity aptamer amplification in ultra-sensitive protein assays using capillary electrophoresis

Aptamers as Affinity Reagents in an Integrated Electrophoretic Lab-on-a-Chip Platform

A simple and rapid approach for measurement of dissociation constants of DNA aptamers against proteins and small molecules via automated microchip electrophoresis

Frontal analysis in microchip CE: A simple and accurate method for determination of protein-DNA dissociation constant

Combining Affinity Selection and Specific Ion Mobility for Microchip Protein Sensing

Measuring Aptamer Equilibria Using Gradient Micro Free Flow Electrophoresis

Continuous Signal Enhancement for Sensitive Aptamer Affinity Probe Electrophoresis Assay Using Electrokinetic Concentration

The Immunoassay Handbook. Theory and Applications of Ligand Binding; ELISA and Related Techniques