key: cord-310058-tp42rgmv
authors: Zhu, Yuan-Shou; Shao, Ning; Chen, Jian-Wei; Qi, Wen-Bao; Li, Yang; Liu, Peng; Chen, Yan-Jing; Bian, Su-Ying; Zhang, Yan; Tao, Sheng-Ce
title: Multiplex and visual detection of African Swine Fever Virus (ASFV) based on Hive-Chip and direct loop-mediated isothermal amplification
date: 2020-10-08
journal: Anal Chim Acta
DOI: 10.1016/j.aca.2020.10.011
sha: 
doc_id: 310058
cord_uid: tp42rgmv

African swine fever is caused by African swine fever virus (ASFV), and has a mortality rate approaching 100%. It has already caused tremendous economy lost around the world. Without effective vaccine, rapid and accurate on-site detection plays an indispensable role in controlling outbreaks. Herein, by combining Hive-Chip and direct loop-mediated isothermal amplification (LAMP), we establish a multiplex and visual detection platform. LAMP primers targeting five ASFV genes (B646L, B962L, C717R, D1133L, and G1340L) were designed and pre-fixed in Hive-Chip. On-chip LAMP showed the limits of detection (LOD) of ASFV synthetic DNAs and mock samples are 30 and 50 copies per microliter, respectively, and there is no cross-reaction among the target genes. The overall performance of our platform is comparable to that of the commercial kits. From sample preparation to results readout, the entire process takes less than 70 min. Multiplex detection of real samples of ASFV and other swine viruses further demonstrates the high sensitivity and specificity of Hive-Chip. Overall, our platform provides a promising option for on-site, fast and accurate detection of ASFV.

African swine fever (ASF), caused by African swine fever virus (ASFV), is a highly contagious and lethal disease which manifests the symptom of acute hemorrhagic fever in domestic pigs and wild boars [1] [2] [3] . Since ASF was first reported in Kenya in 1921, it has rapidly spread around many countries of Africa, Europe, America and Asia [4] [5] [6] . In August 2018, the first ASF outbreak in China was identified in Shenyang City, Liaoning Province and spread to many provinces in a fast way [7] . By 5 March 2020, 165 outbreaks were reported in 32 Provinces and about 1,193,000 pigs have been culled to halt further expansion, posing a devastating impact on both local and the global swine industry [8] .

ASFV is an enveloped double-stranded DNA virus transmitted by soft ticks. ASFV has a giant genome of 170-194 kb and possesses a multilayered structure and overall icosahedral morphology [9, 10] . Because of complex genetic composition and high variabilities, ASFV is currently classified into 24 genotypes and more subtypes [11] .

There is no effective treatment or vaccine available, thus early and accurate diagnosis of ASFV is crucial for rapid control of outbreaks. More recently, by comparing the genome of ASFV China/2018/AnhuiXCGQ strain and related European genotype II strains, Bao et al. found 54-107 variation sites contributing to the alteration of amino acid residues in 10-38 genes, which put forward the high requirements for accurate and mutation-tolerant detection [12] .

The current methods for ASFV detection can be generally divided into two types: 1)

The immunology detection methods, including haemadsorption test (HAD) [13] , enzyme-linked immunosorbent assay (ELISA) [14] , fluorescence antibody test (FAT) [15] , and lateral flow assay (LFA) [16] . Although HAD is reliable and effective, they often take several days to get the results and need high-quality tissues for preparing cells. ELISA and FAT are rapid and convenient methods for precisely recognizing viral antibodies, but this serological diagnosis may not suitable for accurate early diagnosis when there is very low level of ASFV antibodies before seroconversion [17] . 2) The molecular biology detection methods, including many kinds of polymerase chain reaction (PCR) [18] [19] [20] , invader assay [21] , loop-mediated isothermal amplification (LAMP) [22, 23] , and recombinase polymerase amplification (RPA) [24] . As a gold standard for ASFV detection in the laboratory, PCR requires thermal cycling instruments and skilled operators, which is not ideal for J o u r n a l P r e -p r o o f resource-limited situations. With no need for well-equipped laboratory and professional operations, isothermal amplification has emerged as a promising on-site detection method. Recently, a variety of novel isothermal amplification assays in combination with clustered regularly interspaced short palindromic repeats (CRISPR) and lateral flow assay (LFA) have been developed for ASFV diagnosis [25] [26] [27] [28] .

These methods achieved higher sensitivity and specificity, and could be adaptable for point-of-care testing (POCT). Nevertheless, the separation of amplification and detection in open space makes it possible to generate false-positive results due to aerosol contaminations. Without amplification, a high-throughput detection system based on CRISPR-Cas12a is also established for ASFV detection, but it is inconvenient to transfer the Cas12a-cleaved product from a water bath into a disposable cartridge for detection [29] . Last but not least, all methods aforementioned are usually focused on detecting only one gene target at a time, such as B646L encoding viral protein P72 (VP72) [24] [25] [26] [27] [28] [29] , 9GL encoding sulfhydryl oxidase [20] , P1192R encoding topoisomerase II [22] , or K78R encoding DNA binding protein P10 [23] , which may lead to false-negative results because of possible mutations on the complex, highly variable genomes of ASFV. For example, Gallardo et al. found the OIE (World Organization for Animal Health)-recommended conventional PCR showed reduced sensitivity when detecting field and experimental samples because of the nucleotide mismatches between the primers and the ASFV target gene [15] . To sum up, the need for rapid, sensitive, integrated, and multiplex detection of ASFV without thermal cycler has not yet been satisfied. one target gene for each pathogen, which may not suitable to accurately detect variable targets, such as the viral nucleic acid.

Herein, we provide a multiplex and visual detection platform based on capillary array and direct LAMP for rapid and accurate detection of ASFV. Given the complex and variable properties of ASFV genomes, we choose five conserved genes (B646L, B962L, C717R, D1133L, and G1340L) as the target for detection, avoiding the false-negative results in virtue of the mutations of a certain gene. The profile of capillary array looks like a hive, so we named it "Hive-Chip". Different sets of LAMP primers are pre-fixed in each capillary. Without nucleic acid extraction, NaOH-treated swine blood sample is mixed with LAMP reagents directly. Due to the outer surface of the Hive-Chip is hydrophobic and the inner surface of the capillary is hydrophilic, LAMP mixtures can be simultaneously loaded and dispersed into each capillary by capillary forces. Then the Hive-Chip is incubated at 63 for 1 h with sealed optical film and the fluorescence signals are visually detected with 365 nm UV-light. To our knowledge, there is no multiplex detection platform employing multiple targets presently available for ASFV detection. Hive chip-based multiplex detection platform greatly enhances detection accuracy and shows superior characteristics, such as high sensitivity, compatibility with isothermal amplification, on-site detection capability, thus possesses the potential to become a major platform for animal or zoonotic epidemics monitoring.

Fever Regional Laboratory, South China Agricultural University (Guangzhou, China).

The genomic DNA samples of other swine viruses, including dsDNA virus PRV (pseudorabies virus), ssDNA virus PCV2 (porcine circovirus type 2) and PPV (porcine parvovirus), are obtained from Huazhong Agricultural University (Wuhan, China).

According to the multiple sequence alignment of ASFV China/2018/AnhuiXCGQ (GenBank: MK128995.1) with other genotype II ASFV strains available in NCBI database, we chose five target genes (B646L, B962L, C717R, D1133L and G1340L) based on the function type, conservation, and the length of sequences (data is partially shown in Fig. S1 and Table S1 ). Meanwhile, we aligned two pairs of OIE (World Organization for Animal Health)-recommended PCR primers (i.e., OIE-F/OIE-R and PPA-1/PPA-2) with the target sequence (data is shown in Fig. S2 ). To screen more effective primers, we used PrimerExplorer V5 (http://primerexplorer.jp/e/) to design four primer sets for each target gene. All primers were synthesized by Sangon Biotech (Shanghai, China). All gene fragments were synthesized and constructed into pMV vector by Qinglan Biotech (Wuxi, China) . The plasmid of mutated B646L gene was constructed using the QuikChange Site-Directed Mutagenesis Kit (primers are listed in Table S4 ).

The procedure for fabricating the Hive-Chip mainly consists of three parts: the cleaning of capillaries, the assembly of Hive-Chip, and the super-hydrophobic modification. Firstly, Quartz capillaries with 1.0 mm outer diameter and 0.7 mm inner diameter were cut into 4 mm sections (with a volume of ∼1.6 μL) by a diamond wire cutting machine. Then the short capillaries were thoroughly cleaned with piranha solution (H 2 SO 4 /H 2 O 2 =3:1, v/v) for at least 0.5 h, washed by pure water and ethanol, and dried in an oven. Secondly, seven preprocessed capillaries were inserted into a PDMS support to 3.5 mm deep as demonstrated in Fig. 1 , which carried ten arrayed through-holes and was modified by Ultra-Ever Dry Top Coat. According to a previous study [30] , the PDMS support was made by a tubular mold with 10 patterned columns of 1.0 mm diameter inside and cut to 4 mm in length. Thirdly, the J o u r n a l P r e -p r o o f super-hydrophobic modification was the key step for simultaneously sample loading.

To be specific, 15 μL Ultra-Ever Dry Top Coat was loaded carefully on the top surface of the PDMS support and the outer surfaces of the exposed part of capillaries.

After that, the modified Hive-Chip was air-dried for use.

All the LAMP primer sets for ASFV detection are listed in Table S2 were also electrophoresed on a 2 % agarose gel to generate the predicted fragments.

On-chip LAMP adopted the same reaction system as the protocol described above, except that Bst DNA polymerase was 1.5× (namely 0.48 U μL −1 ) and no primers were added, because 1.6 μL of the primer set dissolved in 0.05% chitosan was already individually pre-fixed in the corresponding capillary. One blank capillary with no primers were employed as the negative control (NC). To simultaneously introduce the LAMP mixture into all seven capillaries, an adapter for sample loading was produced as our previously reported [30] (Fig. 1) . The adapter had a funnel-shaped inlet connected with a shallow inverted dish, which could cover the exposed parts of all capillaries in the Hive-Chip. When the standard 100 μL pipet tip was inserted into the inlet, the LAMP mixture was gently injected and dispersed into all capillaries by capillary forces. Then the adapter was removed with the locked tip and the plate well was absolutely sealed by an optical film. Finally, the Hive-Chip was incubated at 63 °C for less than 60 min in an incubator and visually detected by a hand-held UV-light device.

J o u r n a l P r e -p r o o f

Swine blood samples were collected in anticoagulant (EDTA-coated) tubes, followed by mixing of the samples with 100 mM NaOH in a ratio of 1:2, with a final volume of 30 μL, and incubation at room temperature for 3 min [33] . After that, 1 μL of the mixture was pipetted into LAMP reaction mixtures of 25 μL for subsequent amplification.

Once the LAMP reactions finished, the fluorescent images of the Hive-Chip were captured by a digital camera or a smartphone. For quantitative analysis, the fluorescent intensity data was extracted by GenePix Pro 6.1 software (Molecular Devices, CA, USA). Signal intensity was set as mean of foreground subtracted by mean of background for each capillary. Signal-to-noise ratio (SNR) was defined as the ratio of signal intensity of the target to signal intensity of the negative control, and the cut-off was set as SNR>1.5. Triplicate tests were performed for samples to verify the reproducibility of the Hive-Chip.

To optimize the detection procedure, a direct LAMP method without nucleic acid extraction was adopted [33] . As depicted in Fig. 1 , minimal operation and only 3 steps are required. In the first step, swine blood samples were collected in anticoagulant tubes, followed by mixing of the samples with 100 mM NaOH in a ratio of 1:2, and incubated at room temperature. The mixtures were directly used as the template for subsequent amplification. In the second step, the LAMP reaction mixtures containing the pre-processed samples were injected into an inlet of the adapter that connects to the Hive-Chip. The mixtures could be uniformly dispersed into all capillaries by capillary forces. The adapter was then removed with the locked pipet tip and the plate was fully sealed by an optical film, providing a closed space for amplification and avoiding the aerosol contamination. In the third step, the LAMP reactions were performed at 63 °C for less than 60 min in an incubator. The fluorescence signals of the amplifications were excited by a hand-held UV-light J o u r n a l P r e -p r o o f device and imaged by a digital camera or a smartphone for analysis. Importantly, the entire process from sample collection to the readout of the results takes less than 70 min.

The genome comparison of a dominant strain of genotype II ASFV To design the optimal primer sets for LAMP with high specificity, high sensitivity, and robust for a wide range of detections, we set several principles for target genes selection: (1) Since it is known that most of the variations among ASFV genomes results from gain and loss of the MGF members [35] , MGFs were excluded; (2) The target genes were selected from different functional groups as diversified as possible;

(3) The length of the target genes was bigger than 500 bp, the purpose is to ensure multiple sequence alignment to obtained conserved sequences in all known strains listed in GenBank database. Next, we performed a multiple sequence alignment analysis of all eligible genes and eventually chose five conserved genes for LAMP primers design, including B646L, B962L, C717R, D1133L and G1340L (data is partially shown in Fig. S1 and Table S1 ). Although viral protein P72 (VP72) encoded by B646L is the most frequently used gene target for ASFV detection [24] [25] [26] [27] [28] [29] , many mutations are still found in different strains. Besides, we also aligned two pairs of OIE (World Organization for Animal Health)-recommended PCR primers (i.e., OIE-F/OIE-R and PPA-1/PPA-2) with the target sequence in B646L and found many nucleotide mismatches (Fig. S2) , which was consistent with the findings from other studies [15, 36] . To avoid the possible false positive detection because of gene mutations in a single gene, it is necessary to perform multi-targets detection. To assure the success of obtaining optimal primer set, we designed four primer sets for J o u r n a l P r e -p r o o f each gene (Table S2 and S3). Evaluation of the primers were divided into two aspects: validity tests and specificity tests. Two detection methods were used to analyze the LAMP products: visual detection with fluorescent reagent and gel electrophoresis.

For validity tests ( Fig. 2A) , all four primer sets were effective in amplification of the target gene including B646L, B962L, D1133L and G1340L. Both fluorescence detection and gel electrophoresis showed the positive reaction. But only one primer set could successfully amplify the target gene C717R, in return, this prove the necessity of designing multiple sets of primers for a given target. Overall, we obtained at least one set of effective LAMP primers for each of the five ASFV target genes.

To access the specificity, every primer set was used to amplify all the five genes ( Fig. 2B and Table S2 ). The results clearly showed that only when a given set of primers and the corresponding template were added, expected signals were then observed for both fluorescent visual detection and gel electrophoresis, indicating that in-tube LAMP was able to accurately and specifically identify the corresponding ASFV targets.

To verify the specificity on chip, LAMP mixtures containing one of the five synthetic DNAs were evenly distributed into capillaries of the Hive-Chip. Further, we set an unrelated LAMP primer set, which is specific for sad1 gene [30] , as the positive control in each capillary array to demonstrate the validity of LAMP reaction. All the results were as expected (Fig. 3A) . For each synthetic DNA, only the capillary containing the corresponding pre-fixed primers showed positive signals and the rest were negative. For example, for B646L gene, apart from positive control (PC), the bright green signal was obtained only in capillary "1" pre-fixed with the matched primers. Similarly, the other four genes also showed specific amplification results, which were consistent with in-tube LAMP reactions and demonstrated high specificity.

To evaluate the sensitivity, five DNA templates were mixed in one-pot and loaded at the same time, resulting in positive signals from all the capillaries with ASFV primers in the Hive-Chip. As shown in Fig. 3B , serially diluted DNA mixtures including 880, 88, and 30 copies per microliter were successfully detected. And a sensitivity of lower than 15 copies per microliter was only achieved for the target J o u r n a l P r e -p r o o f genes C717R and D1133L, so the limit of detection (LOD) for the current Hive-Chip was around 30 copies per microliter, i.e., 48 copies per reaction. According to the OIE (World Organization for Animal Health) Manual of Standards for Diagnostic Test and Vaccine [37] and the validation of actual samples [36, 38] , the sensitivity of OIE-recommended PCR is about 600 copies per reaction. In addition, 30 copies per microliter of DNA could be easily obtained from acute infection of ASFV [39] . These facts demonstrating that the sensitivity of Hive-Chip is suitable for ASFV detection in real world. By optimizing the reaction conditions and LAMP primers, we believe that higher sensitivity could be achieved for Hive-Chip.

Sample treatment is one of the key steps in nucleic acid testing (NAT) systems.

Although nucleic acid extraction can provide high-quality and relatively pure templates for the down-stream analysis, it also complicates the procedure and enhances the risk of nucleic acid loss and cross-contamination, which is not suitable for point-of-care tests (POCTs). To simplify nucleic acid extraction, Liu et al. [33] developed an accurate, rapid and easy-to-use SNP detection method based on LAMP that do not require DNA extraction from whole blood, dried blood spot, buccal swab and saliva, this method is known as direct-LAMP. According to their results, NaOH treatment could effectively lead to cell lysis, followed by release of DNA for use in LAMP amplification. Meanwhile, various DNA polymerase inhibitors in whole blood, such as hemoglobin, IgG and proteases can be inactivated by the treatment with NaOH solution.

To further verify the applicability of Hive-Chip, the best way is to test deactivated real sample in blood collected from ASFV infected pigs. However, due to safety issue and highly restricted regulation of the government, it is very difficult to collect real samples. Thus, we decided to mimic the real sample. We prepared a set of mock samples by spike all the five synthetic DNA templates into EDTA-blood collected from a healthy pig. The DNA templates were set as 3000, 300, 100, 50, 30 and 0 copies per microliter. Because ASFV is a virus with dsDNA genome, and the viral particle is very easily to be disrupted [25, 26] , we believe these mock samples are very close to the real sample. By applying the mock samples, we conducted the entire analytical process from sample treatment to fluorescent readout in the Hive-Chip J o u r n a l P r e -p r o o f following the protocol shown in Fig. 1 . As what we expected, five genes were successfully detected from this blood sample at the low limit of detection (LOD) of 50 copies per microliter (Fig. 4A) , which were comparable with the results acquired from the pure plasmid samples. The quantitative analysis of the signal intensity obtained from the corresponding Hive-Chip (e.g., 3000 copies and 30 copies per microliter) further confirmed the reliability of results. It may due to the complex background of swine blood that a sensitivity of lower than 30 copies per microliter was only achieved for the target gene B962L, C717R and D1133L. But from the perspective of detection, as long as the sensitivity of one gene reaches the LOD, ASF will not be missed. Furthermore, to avoid that the complex background of swine blood would generate false-positive, we set the healthy blood sample with no target genes (namely 0 copies per microliter) as a control. According to the results, no capillaries showed bright green fluorescence apart from positive control, which proved the capability of performing analysis of more complicated samples of ASFV.

To clearly display the linear detection ranges and detection limits of different genes, we also drew sensitivity plot for each gene (Fig. 4B) . Although the signal advancement of the Hive-Chip line charts exhibited positive correlated with the concentration of the targets, they did not show good linear relationship, this could be explained by the fact that LAMP is intrinsically not a linear amplification method.

The fluorescence of C717R gene at 30 copies per microliter was a little bit higher than that at 50 copies per microliter, which might result from the fluctuation of low copies templates in complex background (Fig. 4B) .

Although the relatively conserved sequence (e.g., B646L) of ASFV has been chosen for detection, we can still find that the mutable viral genomes bring many mismatches between the primers and the target sequence ( Fig. S1 and S2) . To further prove that the detection performance of Hive-Chip was comparable with commercial kits, PCR kit and LAMP kit (Yoyoung Biotech) approved by China Animal Disease Control Center for ASFV detection were also tested using mock samples of serial dilutions. As shown in Fig. S3 , the limit of detection (LOD) of both PCR kit and LAMP kit was about 100 copies per reaction. By contrast, the sensitivity of Hive-Chip was 50 copies per microliter, i.e., 80 copies per reaction, which was comparable with that of these commercial kits. In addition, the sensitivity of our platform meets the international standard, i.e., the recommended OIE Manual of Standards for Diagnostic Test and Vaccine, i.e., approximately 600 copies per reaction [36] [37] [38] . As previously reported, Zhao et al. [39] adopted qPCR to quantify VP72 gene copies of the blood samples from three infectious pigs. After 3 days infection, the VP72 gene copies can reach more than 10 7 copies per milliliter (i.e. 10 4 copies per microliter), which is far above the limit of detection of Hive-Chip. This also confirmed the practicability of our platform. Actually, we can also increase the input of blood in the LAMP mixtures to improve the sensitivity of detection when it is necessary. Moreover, both OIE PCR and commercial kits (Yoyoung Biotech) can only detect one gene (B646L) at a time and require heavy instrumentation for fluorescence detection. While the LAMP kit needs an extra incubation at 80 °C for 3 min for sample preparation to release the nucleic acids. In the contrast, our platform is capable of monitoring multiple targets in a single test. The results could be directly visualized, and no sophisticated sample preparation is needed.

To further demonstrate the capability of Hive-Chip for ASFV detection, we collected three ASFV genomic DNA samples in complex mixtures. As shown in Fig. 5A , all of them were successfully detected by Hive-Chip. Moreover, nine genomic DNA samples of other major swine viruses, including pseudorabies virus (PRV), porcine circovirus type 2 (PCV2), and porcine parvovirus (PPV), were also obtained for specificity testing. As shown in Fig. 5B and S4 , the assays exhibited no cross-reaction with ASFV. These results indicate the high specificity of Hive-Chip.

To clearly demonstrate the advantages of our platform, we prepared Table S5 to compare Hive-Chip with other four representative methods for ASFV detection, as well as two commercial kits. Without nucleic acid extraction and heavy instrumentation, Hive-Chip can simultaneously detect five genes related to ASFV in a one-pot reaction, which can largely guarantee the accuracy and avoid the aerosol contamination. The total testing time is less than 70 min and the limit of detection (LOD) is 80 copies per reaction. Moreover, compared with our previous work (Table   S6) , i.e., CALM platform [30] and PAAC system [31] , the most important feature of current study is that we target multiple genes for a single pathogen (especially variable virus). To our knowledge, this concept has not been attempted for LAMP and other isothermal NAT technologies. Meanwhile, direct-LAMP was adopted to simplify the blood sample pre-treatment and facilitate the on-site detection of ASFV.

Overall, we provided a total solution based on Hive-Chip for various targets and samples detection.

Multiplex nucleic acid detection of variable ASFV is critical for accurate and early diagnosis of ASF. However, current methods only target one gene of ASFV, which easily brings missed inspection because of the highly mutable genomes of this virus.

Herein, we established a multiplex and visual detection platform based on Hive-Chip and direct LAMP for rapid and accurate detection of ASFV. This platform assured detection accuracy through monitoring several gene fragments in a single test.

There are several advantages of our platform over the existing methods. Firstly, the design of multi-targets detection in a single reaction plays a vital part in accurately diagnosis of the mutable viral nucleic acid. If we consider the singleplex detection as a "Pistol" of shooting a target a time, Hive Chip-based multiplex detection platform may similar to a "Shotgun", which can shoot many "Enemies" (genes of ASFV) a time. In this study, apart from the B646L gene included in OIE-recommended PCR, the other four conserved genes (B962L, C717R, D1133L and G1340L) are also selected as the target for the first time for multiplex detection of ASFV, which largely avoid the false-negative results arising from the possible mutations of a certain gene.

Based on this principle, Hive-Chip can serve as a versatile platform for various virus detection. For example, nucleic acid testing (NAT) of the recent outbreak of severe J o u r n a l P r e -p r o o f acute respiratory syndrome (SARS)-CoV-2 mainly covers Orf1ab gene, N gene, E gene and human RNase P gene as a control, which requires multiplex detection [40] [41] [42] . In this case, Hive-Chip can integrate multiple genes at a time to realize simultaneous detection and subsequently save a lot of time for epidemic control.

Moreover, to our knowledge, it has not been reported that there is a significant difference in the expression level of these five genes in different strains of ASFV.

Currently, ASFV is usually genotyped using a combination of partial sequencing of the B646L gene and analysis of the central variable region (CVR) of the B602L gene [11] . Meanwhile, other genes like p30, p54, and CP204L gene are also served as a supplementary classification standard [43] . But it is hard to use the difference or ratio of these genes to identify the genotype of samples from different regions. Secondly, multiplex NATs are usually disturbed by cross reaction between different primer sets.

Hive-Chip can provide physical isolation of primers by different capillaries, and the hydrophobic modification can avoid the cross contamination of capillaries in sample loading. Meanwhile, the closed space for amplification and visual detection theoretically can prevent 100% aerosol contaminations. Thirdly, nucleic acid extraction is the key step in NATs and it often needs complex operation. Integrated with direct LAMP, the entire process of Hive-Chip from blood sample treatment to detection can be finished within 70 min independent of nucleic acid extraction and sophisticated instruments, which is suitable for on-site detection of ASFV. Besides, other direct amplification methods including direct RPA [34] could also be easily combined with our platform for different types of samples.

Last but not least, Hive-Chip based platform has good flexibility and compatibility.

The current version of chip has ten channels for detecting as many as eight targets other than positive and negative control. As for ASFV detection, we only adopt five targets and leave three channels unused. Furthermore, by increasing the size of Hive-Chip, we can increase the channel number and locate more capillaries in a single Hive-Chip unit. Because the current format of Hive-Chip is compatible with standard 96-well plate and it can be assembled into a single well, we can easily perform high-throughput sample loading by means of the multi-channel pipette [30] . Based on this, Hive-Chip can be integrated with the current automated liquid workstation (e.g.,

Beckman & Biomek 4000) for high-throughput sample loading. Furthermore, to realize massive detection, we can also employ multi-mode plate reader system (e.g.,

Biotek & Cytation 5 Cell Imaging Multi-Mode Reader) to acquire fluorescence images for subsequent signal analysis. We believe that Hive-Chip-based platform is suitable for high-throughput screening when combined with widely accessible instruments of 96-well plate operation.

Unfortunately, due to the lack of biosafety laboratory for handling the infectious real samples, we didn't have chance to test swine blood sample obtained from pigs In summary, we have developed a multiplex visual detection method based on

Hive-Chip and direct LAMP with a streamlined operation procedure, which offers a feasible strategy and key reagents for rapid and accurate on-site detection of ASFV.

The method that we demonstrated is of high generality, it could be easily adopted for fast development of assays/ kits for animal diseases or possible future outbreaks. J o u r n a l P r e -p r o o f J o u r n a l P r e -p r o o f 

Arrival of deadly pig disease could spell disaster for China

African swine fever emerging in China: Distribution characteristics and high-risk areas

African Swine Fever Virus: A Review

On A Form of Swine Fever Occurring in British East Africa

Epidemiology of African swine fever virus

Interaction of historical and modern Sardinian African swine fever viruses with porcine and wild-boar monocytes and monocyte-derived macrophages

African swine fever in China

Food and Agricultural Organization of the United Nations (2020)

Ictv Report Consortium, ICTV Virus Taxonomy Profile: Asfarviridae

Architecture of African swine fever virus and implications for viral assembly

Genetic characterization of African

Mozambique and identification of a novel genotype

Genome comparison of African swine fever virus

/AnhuiXCGQ strain and related European p72 Genotype II strains

African swine fever virus encodes a CD2 homolog responsible for the adhesion of erythrocytes to infected cells

African swine fever virus serodiagnosis: a general review with a focus on the analyses of African serum samples

Assessment of African Swine Fever Diagnostic Techniques as a Response to the Epidemic Outbreaks in Eastern European Union Countries: How To Improve Surveillance and Control Programs

Development of a novel lateral flow assay for detection of African swine fever in blood

Simplifying sampling for African swine fever surveillance: Assessment of antibody and pathogen detection from blood swabs

Highly sensitive PCR assay for routine diagnosis of African swine fever virus in clinical samples

Development of a novel quantitative real-time PCR assay with lyophilized powder reagent to detect African swine fever virus in blood samples of domestic pigs in China

Sensitive detection of African swine fever virus using real-time PCR with a 5′ conjugated minor groove binder probe

Adaptation of an Invader assay for the detection of African swine fever virus DNA

Detection of African swine fever virus by loop-mediated isothermal amplification

Development of a real-time loop-mediated isothermal amplification (LAMP) assay and visual LAMP assay for detection of African swine fever virus (ASFV)

A recombinase polymerase amplification-based assay for rapid detection of African swine fever virus

Clustered Regularly Interspaced Short Palindromic Repeats/Cas9-Mediated Lateral Flow Nucleic Acid Assay

Universal and Naked-Eye Gene Detection Platform Based on the Clustered Regularly Interspaced Short Palindromic Repeats/Cas12a/13a System

CRISPR/Cas12a technology combined with immunochromatographic strips for portable detection of African swine fever virus

Cas12a-Based On-Site and Rapid Nucleic Acid Detection of African Swine Fever

High-throughput and all-solution phase African Swine Fever Virus (ASFV) detection using CRISPR-Cas12a and fluorescence based point-of-care system

Visual detection of multiple genetically modified organisms in a capillary array

Multiplex sample-to-answer detection of bacteria using a pipette-actuated capillary array comb with integrated DNA extraction, isothermal amplification, and smartphone detection

Direct PCR amplification of forensic touch and other challenging DNA samples: A review

A direct isothermal amplification system adapted for rapid SNP genotyping of multifarious sample types

Field-deployable viral diagnostics using CRISPR-Cas13

African swine fever virus replication and genomics

Development of an updated PCR assay for detection of African swine fever virus

African swine fever

Development of a TaqMan PCR assay with internal amplification control for the detection of African swine fever virus

Replication and virulence in pigs of the first African swine fever virus isolated in China

Detection of 2019 novel coronavirus (2019-nCoV) by real-time RT-PCR

CRISPR-Cas12-based detection of SARS-CoV-2

Highly accurate and sensitive diagnostic detection of SARS-CoV-2 by digital PCR

Genomic analysis of highly virulent Georgia 2007/1 isolate of African swine fever virus

This work was partially supported by Science and Technology Commission of