Preparation, formation mechanism, photocatalytic, cytotoxicity and antioxidant activity of sodium niobate nanocubes RESEARCH ARTICLE Preparation, formation mechanism, photocatalytic, cytotoxicity and antioxidant activity of sodium niobate nanocubes Muhammad NawazID 1*, Sarah Ameen Almofty2, Faiza Qureshi1,3 1 Department of Nano-Medicine Research, Institute for Research and Medical Consultations (IRMC), Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia, 2 Department of Stem Cell Research, Institute for Research and Medical Consultations (IRMC), Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia, 3 Deanship of Scientific Research, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia * mnnmuhammad@iau.edu.sa, nawwaz@gmail.com Abstract A hydrothermal method was employed to prepare the sodium niobate (NaNbO3) nano- cubes. We executed time dependent experiments to illustrate the formation mechanism of sodium niobate nanocubes. It was observed that the morphology of NaNbO3 nanocubes was dependent on the reaction time and 12hr reaction time was found to be suitable. Mor- phology, composition, structure and optical properties of sodium niobate nanocubes were evaluated by scanning electron microscope, X-ray energy-dispersive spectrometer, X-ray diffraction and UV-visible diffuse reflectance spectrometer. The photocatalytic activity of sodium niobate was studied for photocatalytic hydrogen production. It was anticipated that the sodium niobate (NaNbO3) cubes exhibited good photocatalytic activity under UV light irradiation using lactic acid as sacrificial agent. The cytotoxicity activity of sodium niobate nanocubes was studied as well at different concentrations (5 mg/mL, 3 mg/mL, 1 mg/mL, and 0.25 mg/mL) against human colon colorectal carcinoma cell line (HCT116) by MTT assay and EC50 was found to be 1.9 mg/mL. Sodium niobate proved to be a good DPPH free radical scavenging material, tested at different concentrations. It was noticed that peak intensity at 517 nm was decreased after 30 minute incubation, further supporting the antioxi- dant activity. This study will be useful for design and engineering of materials that can be used in biomedical applications and in photocatalysis. Introduction Excess consumption of fossil fuel and increased pollution has make scientists actively looking for solutions in terms of energy and environmental issues. Hydrogen is as an eco-friendly fuel and an alternative source of energy. Currently, hydrogen is mostly used as energy source via fossil fuels and electrolysis of water, the use of latter, however is economically not feasible as the process consumes high energy. Solar energy is the alternatively favored renewable energy source that can satisfy the global energy requirements. In order to resolve energy crisis and environmental problems, photocatalytic hydrogen evolution using photocatalysts of PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 1 / 13 a1111111111 a1111111111 a1111111111 a1111111111 a1111111111 OPEN ACCESS Citation: Nawaz M, Almofty SA, Qureshi F (2018) Preparation, formation mechanism, photocatalytic, cytotoxicity and antioxidant activity of sodium niobate nanocubes. PLoS ONE 13(9): e0204061. https://doi.org/10.1371/journal.pone.0204061 Editor: Yogendra Kumar Mishra, Institute of Materials Science, GERMANY Received: June 2, 2018 Accepted: August 31, 2018 Published: September 14, 2018 Copyright: © 2018 Nawaz et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Data Availability Statement: All relevant data are within the paper. Funding: The authors would like to thank King Abdulaziz City for Science and Technology (KACST) for financial support of this work through project number 259-37- مص . Competing interests: The authors have declared that no competing interests exist. http://orcid.org/0000-0001-9016-9229 https://doi.org/10.1371/journal.pone.0204061 http://crossmark.crossref.org/dialog/?doi=10.1371/journal.pone.0204061&domain=pdf&date_stamp=2018-09-14 http://crossmark.crossref.org/dialog/?doi=10.1371/journal.pone.0204061&domain=pdf&date_stamp=2018-09-14 http://crossmark.crossref.org/dialog/?doi=10.1371/journal.pone.0204061&domain=pdf&date_stamp=2018-09-14 http://crossmark.crossref.org/dialog/?doi=10.1371/journal.pone.0204061&domain=pdf&date_stamp=2018-09-14 http://crossmark.crossref.org/dialog/?doi=10.1371/journal.pone.0204061&domain=pdf&date_stamp=2018-09-14 http://crossmark.crossref.org/dialog/?doi=10.1371/journal.pone.0204061&domain=pdf&date_stamp=2018-09-14 https://doi.org/10.1371/journal.pone.0204061 http://creativecommons.org/licenses/by/4.0/ semiconductors such as oxides, sulfides and nitrides has been considered as an attractive and clean way, low-cost and eco-friendly production of hydrogen [1–5]. The engineering and design of nanomaterials with controlled morphology has been getting more attention and significance owing to their unique physical and chemical properties. The photocatalytic properties of nanomaterials are vastly dependent on shape, size, crystal facets, size distribution and phases [6–10] which makes it much more challenging for the researchers to prepare the perfectly engineered materials that can be used as biomaterial, photocatalyst, catalyst support and adsorbent [11–18]. Sodium niobate (NaNbO3) is a fascinating material with pervoskite structure at a low cost. It has high crystallinity and good chemical stability with low environmental impact [19–21], attracts scientists due to its ionic conductivity, photorefractive properties, nonlinear optics and photocatalytic properties [22–25]. Different morphologies of nano NaNbO3, such as nano- plates, nanocubes and nanowires have been studied for photocatalytic activities with the con- clusion that photocatalytic activity improved with controlled morphology of NaNbO3 [26–29]. Current research indicates that sodium niobate is an efficient photocatalyst for hydrogen pro- duction [30], photocatalytic decomposition of organic contaminants [25] and CO2 reduction [30–32]. Several methods had been reported for the preparation of sodium niobate (NaNbO3), how- ever, most of them involved complicated polymerized complex methods [32, 33], and there- fore, the need to develop simple and economic method for the preparation of sodium niobate (NaNbO3) was felt. As we discussed above, to resolve the energy crisis there is need to prepare the low-cost and eco-friendly photocatalyst for hydrogen production. This study involved the preparation of sodium niobate (NaNbO3) by hydrothermal method and its application as photocatalyst and biomaterial. Furthermore, the formation mechanism and cytotoxicity of sodium niobate has never been explored and studied so far. This study is useful to provide the details of formation mechanism of NaNbO3 and to study the cytotoxicity, antioxidant and photocatalytic activity. Materials and methods Chemical and materials All chemicals, kits and reagents were purchased from commercial sources and used as it. Preparation of sodium niobate cubes A mixture of niobium pentoxide (Nb2O5, 0.265g) and sodium hydroxide (0.6g), was stirred in deionized water at room temperature for certain period. The solution was then transferred into Teflon-lined autoclave and heated at 200˚C for 12h. After cooling, Teflon-lined autoclave at room temperature; the white precipitates obtained were centrifuged and washed several times with deionized water and ethanol. Lastly, the product was dried at 60˚C for 12h. Characterization X-ray diffraction pattern of NaNbO3 was recorded on a Rigaku X-ray diffractometer using Cu Kα radiation. Morphology of the product was observed by field emission scanning electron microscope (FE-SEM) and elemental composition was determined by X-ray energy-dispersive (EDX). The UV-visible spectrum was obtained on Shimadzu UV-Vis spectrophotometer using BaSO4 as a reference. Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 2 / 13 https://doi.org/10.1371/journal.pone.0204061 Photocatalytic activity Photocatalytic activity of NaNbO3 was studied in a closed gas circulation system under a 300W xenon lamp. 50 mg of catalyst was added to aqueous lactic acid solution and dispersed ultrasonically. The solution was evacuated for 20–30 minutes to remove the dissolved gases before irradiation and then exposed to irradiation by Xe lamp. The hydrogen gas generated was determined in situ by a gas chromatogram (TECHCOMP, GC 7890-II) equipped with a TCD detector [8]. Cell culture and cytotoxicity activity Human colon colorectal carcinoma cell line (HCT116) was purchased from ATTC (American Type Culture Collection, USA) and maintained in DMEM medium. Cytotoxicity activity of NaNbO3 nanocubes were evaluated against HCT116 cells by MTT assay Vybrant 1 MTT Cell Proliferation Kit (Thermo Fisher Scientific). HCT116 cells were seeded in 96-well plates at (10 4 cells/well) in DMEM medium supplied with 10% fetal bovine serum and 1% penicillin- streptomycin. Different concentrations of NaNbO3 nanocubes (5 mg/mL, 3mg/mL, 1 mg/mL, and 0.25 mg/mL) were added to the wells. Cells were maintained in humidified atmosphere with 5% CO2 at 37˚C and incubated for 24 h. After incubation, culture medium was removed and fresh medium was added with 10 μL of MTT solution, cells were further incubated for 4h at 37˚C. Medium was removed after incubation and sterile DMSO (100 μL) was added to solu- bilize the formazan blue crystals. SYNERGY Neo2 multi-mode microplate reader (Biotek) was employed to record the absorbance at 570 nm. Cell viability was then calculated using follow- ing formula: Cell viability ð%Þ¼ absorbance of sample=absorbance of control � 100 Antioxidant activity The antioxidant activity of NaNbO3 was studied using DPPH as free radicals source. To assess the antioxidant activity of NaNbO3, different concentration such as 5 mg/mL, 3 mg/mL and 1mg/mL were prepared. 1 mL of DPPH solution (0.1 mM in methanol) was mixed with 3 mL of NaNbO3 different concentrations and incubated in dark for 30 minutes. Mixture was centri- fuged and supernatant was analyzed at 517 nm against blank using UV-visible spectrophotom- eter. The % inhibition of DPPH scavenging activity was computed as: % DPPH radical scavenging activity ¼ðAbsblank � Abssample=AbsblankÞ� 100 Where Abs blank is the absorbance of blank and Abs sample absorbance of sample. Results & discussion Characterization NaNbO3 nanocubes were prepared by hydrothermal method and morphology of the product was observed by SEM. Fig 1a shows representative images of NaNbO3 nanocubes at different magnifications. It is clear from SEM images that the product has nanocubes morphology with 500 nm in size. The crystal structure of NaNbO3 was probed by X-ray diffraction. Fig 1b shows the XRD pattern of NaNbO3 prepared at 200˚C for 12 h. The sharp and strong diffraction peaks suggest a nanocrystalline structure. All the diffraction peaks can be indexed as cubic phase of NaNbO3 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 3 / 13 https://doi.org/10.1371/journal.pone.0204061 (JCPDS card no. 75–2102). No impurities can be detected in this pattern, which implies cubic phase of NaNbO3 can be obtained under the described experimental conditions. Energy-dispersive X-ray spectroscopy (EDX) was performed to confirm the composition of the as-prepared product. We selected different surface as collection areas and found the same results. Fig 1c shows energy-dispersive X-ray spectroscopy (EDX) spectra of NaNbO3; con- firming the presence of Na, Nb and O in the product and also shows there is no impurity in the product. A UV-visible diffuse reflectance (DRS) spectrum of NaNbO3 is revealed in Fig 1d. The diffuse reflectance spectra of the product demonstrated an absorption edge at 386 nm in the UV region, corresponding to the band gap energy of 3.21 eV. Formation mechanism In order to check the effect of different solvents on the morphology and size of NaNbO3, experiments were conducted in water, methanol and ethanol at 200˚C. SEM results obtained Fig 1. Characterization data of NaNbO3. (a) FESEM images of NaNbO3. (b) XRD pattern of NaNbO3. (c) EDX pattern of NaNbO3. (d) DR-UV- visible spectrum of NaNbO3. https://doi.org/10.1371/journal.pone.0204061.g001 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 4 / 13 https://doi.org/10.1371/journal.pone.0204061.g001 https://doi.org/10.1371/journal.pone.0204061 in different solvents are shown in Fig 2a–2c. As we can see in the Fig 2a, when reaction was conducted in the water, the product was nanocubes. On the other hand, when reaction was performed in methanol and ethanol, nanocubes were not formed (Fig 2b and 2c). Hence water was selected as a reaction medium for the preparation of NaNbO3 nanocubes. To optimize the reaction temperature and to see the effect of temperature on the morphology and size of NaNbO3 nanocubes, we performed the reaction at different temperatures (150˚C, 180˚C and 200˚C). SEM images of the products obtained at 150˚C, 180˚C and 200˚C are shown in the Fig 3a–3c. It is clear from SEM results, the product obtained at 150˚C has big block like morphol- ogy with aggregates (Fig 3a). On the other hand, when reaction was performed at 180˚C, nanorods and aggregated nanocubes were formed (Fig 3b). Furthermore, the product obtained at 200˚C was consisted of nanocubes (Fig 3c). These results suggested that reaction tempera- ture 200˚C is optimal to get NaNbO3 nanocubes. To further understand the formation mecha- nism of NaNbO3 nanocubes at 200˚C, we conducted reactions at different times. As it is evident from Fig 4a, the product obtained after 30 minute of reaction comprises of spheres. After 1h, nanocubes are formed with the co-existence of small particles (Fig 4b). The SEM image in Fig 4c indicates that nanocubes are formed as the reaction proceeded for 3 h. Fig 4d is SEM image of nanocubes formed after 6 h reaction time with some aggregates. Finally, well- developed nanocubes (having size from 100–500 nm) were observed upon increasing further reaction time to 12h (Fig 4e). Fig 2. Effect of solvents on the morphology and size of NaNbO3. (a) Water. (b) Methanol. (c) Ethanol. https://doi.org/10.1371/journal.pone.0204061.g002 Fig 3. Effect of temperature on the morphology and size of NaNbO3. (a) 150˚C. (b) 180˚C. (c) 200˚C. https://doi.org/10.1371/journal.pone.0204061.g003 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 5 / 13 https://doi.org/10.1371/journal.pone.0204061.g002 https://doi.org/10.1371/journal.pone.0204061.g003 https://doi.org/10.1371/journal.pone.0204061 Fig 4. FESEM images of NaNbO3 at different times. (a) 30 min. (b) 1h. (c) 3h. (d) 6h. (e) 12h at 200˚C. https://doi.org/10.1371/journal.pone.0204061.g004 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 6 / 13 https://doi.org/10.1371/journal.pone.0204061.g004 https://doi.org/10.1371/journal.pone.0204061 Based on the above discussion, it can be deduced that oriented attachment and Ostwald rip- ening are involved for the formation of NaNbO3 nanocubes. Fig 5 displays proposed formation mechanism for NaNbO3 nanocubes. In the course of reaction, NaOH reacts with Nb2O5 and it results in the formation of primary nanocrystals. The primary nanocrystals undergo oriented attachment to form small cubes. These primary nanocubes undergo mutual orientation and self-assembled to form nanocubes (Fig 5). When reaction was preceded further, reaction rate further decreased and at this stage Ostwald ripening became more dominant. Due to higher surface energy, small particles slowly dissolved to form nanocubes [34]. Stepwise formation mechanism is illustrated in Fig 5. Photocatalytic activity The photocatalytic activity of synthesized NaNbO3 nanocubes for hydrogen production was evaluated under UV light and expressed in terms of hydrogen evolution rate (Fig 6). As it can be seen in Fig 6, the photocatalytic activity of NaNbO3 started increasing with passage of time. However, after certain time the photocatalytic activity was dramatically decreased. It could be possible that with the lapse of time the concentration of sacrificial reagent was decreased which result in the lower rate of hydrogen production. The photocatalytic activity of NaNbO3 could be ascribed to its light harvesting ability and can accelerate the transportation of photo- generated electron hole pairs, making the photocatalytic process more efficient [9]. Further- more, good crystallinity of NaNbO3 also reduces the chance of electron hole recombination and enhances the photocatalytic activity. Proposed mechanism for the photocatalytic hydrogen production of NaNbO3 under UV light irradiation is illustrated in Fig 7. Cytotoxicity activity The cytotoxicity activity of NaNbO3 nanocubes was studied against human colon colorectal carcinoma cell line (HCT116) at different concentrations such as 5 mg/mL, 3 mg/mL and 1 mg/mL and 0.25 mg/mL. The cytotoxicity activity of NaNbO3 nanocubes was observed from 1 mg/mL concentration and at the higher concentrations, whereas no detectable effect at the Fig 5. Stepwise illustration for the formation mechanism of NaNbO3 nanocubes. https://doi.org/10.1371/journal.pone.0204061.g005 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 7 / 13 https://doi.org/10.1371/journal.pone.0204061.g005 https://doi.org/10.1371/journal.pone.0204061 lowest concentration (0.25 mg/mL) was observed. The effective concentration (EC50) of NaNbO3 was calculated using the equation generated from exponential chart of the cell viabil- ity percentage against concentrations. EC50 was found 1.9 mg/mL. The cell viability % of the NaNbO3 nanocubes treated cells at different concentration is shown in Fig 8. Antioxidant activity We considered different concentration of NaNbO3 nanocubes to study the antioxidant activ- ity. During the experiment, a change in color of DPPH solution from violet to pale yellow was noticed in the presence of NaNbO3 nanocubes. Furthermore, intensity of peak at 517 was decreased after 30 minute (Fig 9), indicated the free radical scavenging activity of NaNbO3 nanocubes. The free radical scavenging activity of NaNbO3 was perceived between 71.33 to 72.79% at different concentrations. The decline in intensity of peak at 517 nm could be attrib- uted due to the transfer of electron density situated at oxygen to the odd electron found at nitrogen atom in DPPH. The results of this study were promising; sodium niobate (NaNbO3) with controlled mor- phology (nanocubes) was prepared at 200˚C. NaNbO3 revealed good photocatalytic activity Fig 6. H2 evolution rate by NaNbO3 for 6 h irradiation. https://doi.org/10.1371/journal.pone.0204061.g006 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 8 / 13 https://doi.org/10.1371/journal.pone.0204061.g006 https://doi.org/10.1371/journal.pone.0204061 for hydrogen production by splitting water indicating that it can be used as photocatalyst. The effective concentration (EC50) of NaNbO3 nanocubes against human colon colorectal carci- noma cell line (HCT116) was observed 1.9 mg/mL. NaNbO3 also demonstrated good antioxi- dant activity at different concentrations. Biological results indicate that NaNbO3 can be used as biomaterial. Conclusion NaNbO3 nanocubes were successfully produced via facile hydrothermal method. Time depen- dent study was conducted to deduce the formation mechanism of NaNbO3 nanocubes. Results revealed development of nuclei that transitioned to segregated nanocubes as the reaction time progressed. Band gap of NaNbO3 was observed 3.21 eV and it exhibited good photocatalytic activity for hydrogen production under UV light irradiation. EC50 of NaNbO3 nanocubes against human colon colorectal carcinoma cell line (HCT116) was found to be 1.9 mg/mL. The antioxidant activity was found to be significant too and coupled with anticancer potential can be a good candidate as an engineered biomaterial. This work provides insights for the Fig 7. Proposed mechanism for the photocatalytic hydrogen production of NaNbO3 under UV light irradiation using lactic acid as sacrificial agent. https://doi.org/10.1371/journal.pone.0204061.g007 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 9 / 13 https://doi.org/10.1371/journal.pone.0204061.g007 https://doi.org/10.1371/journal.pone.0204061 Fig 8. Percentage of cell viability using MTT assay. HCT116 cells were treated with different concentrations of NaNbO3 nanocubes (5 mg/mL, 3 mg/mL, 1 mg/mL and 0.25 mg/mL) and MTT assay was performed 24h post incubation to measure the cell viability. The statistical analysis was performed using oneway ANOVA- Dunnett’s test, whereas � = p<0.05. https://doi.org/10.1371/journal.pone.0204061.g008 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 10 / 13 https://doi.org/10.1371/journal.pone.0204061.g008 https://doi.org/10.1371/journal.pone.0204061 preparation of NaNbO3 nanocubes with well-regulated morphologies, serving as promising photocatalyst. Acknowledgments The authors would like to thank King Abdulaziz City for Science and Technology (KACST) for financial support of this work through project number: 259-37- مص . Author Contributions Conceptualization: Muhammad Nawaz. Investigation: Sarah Ameen Almofty, Faiza Qureshi. References 1. Sim U, Yang T.-Y, Moon J, An J, Hwang J, Seo J.-H, et al. (2013) N-Doped Monolayer Graphene Cata- lyst on Silicon Photocathode for Hydrogen Production. Energy Environ. Sci 6: 3658–3664. 2. Kong D, Cha J.-J, Wang H, Lee H.-R, Cui Y (2013) First-Row Transition Metal Dichalcogenide Catalysts for Hydrogen Evolution Reaction. Energy Environ Sci. 6: 3553–3558. Fig 9. UV-visible spectra indicating antioxidant activity (Reduction in peak intensity) of NaNbO3 nanocubes at different concentrations. https://doi.org/10.1371/journal.pone.0204061.g009 Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 11 / 13 https://doi.org/10.1371/journal.pone.0204061.g009 https://doi.org/10.1371/journal.pone.0204061 3. Moriya M, Minegishi T, Kumagai H, Katayama M, Kubota J, Domen K (2013) Stable Hydrogen Evolution from CdS-Modified CuGaSe2 Photoelectrode under Visible-Light Irradiation. J Am Chem Soc. 135: 3733–3735. https://doi.org/10.1021/ja312653y PMID: 23437875 4. Feng L.L, Zou X, Zhao J, Zhou L.J, Wang D.J, Zhang X, et al. (2013) Nanoporous Sr-Rich Strontium Titanate: A Stable and Superior Photocatalyst for H2 Evolution. Chem Commun. 49: 9788–9790. 5. Nawaz M, Mou F, Xu L, Guan J (2018) Effect of solvents and reaction parameters on the morphology of Ta2O5 and photocatalytic activity. J Mol Liq. 269: 211–216. 6. Wang X, Zhuang J, Peng Q, Li Y. D (2005) A general strategy for nanocrystal synthesis. Nature 7055: 121–124. 7. Han J.T, Huang Y. H, Wu X. J, Wu C. L, Wei W, Peng B, et al. 2006) Tunable Synthesis of Bismuth Fer- rites with Various Morphologies. Adv Mater. 18: 2145–2148. 8. Nawaz M (2017) Morphology-controlled preparation of Bi2S3-ZnS chloroplast-like structures, formation mechanism and photocatalytic activity for hydrogen production. J Photochem Photobiol A: Chemistry 332: 326–330. 9. Nawaz M, Mou F, Xu L, Tua H, Guan J (2017) F–Bi4TaO8Cl flower-like hierarchical structures: con- trolled preparation, formation mechanism and visible photocatalytic hydrogen production. RSC Advances 7: 121–127. 10. Yogendra K.M, Rainer A (2018) ZnO tetrapod materials for functional applications. Materials Today 6: 631–651. 11. Titirici M, Antonietti M, Thomas A (2006) A Generalized Synthesis of Metal Oxide Hollow Spheres Using a Hydrothermal Approach. Chem. Mater 18: 3808–3812. 12. Chen Z, Gao L (2008) A New Route toward ZnO Hollow Spheres by a Base-Erosion Mechanism. Cryst Growth Des. 8: 460–464. 13. Caruso F, Caruso R. A, Mohwald H (1998) Nanoengineering of inorganic and hybrid hollow spheres by colloidal templating. Science 282: 1111–1114. PMID: 9804547 14. Cao S. W, Zhu Y. J. J (2008) Surfactant-Free Preparation and Drug Release Property of Magnetic Hol- low Core/Shell Hierarchical Nanostructures. Phys Chem C 112: 12149–12156. 15. Jielin Y, Qiongzhi G, Xin L,Yingju L,Yueping F, Siyuan Y, et al. (2014) Novel 3-D nanoporous graphitic- C3N4 nanosheets with heterostructured modification for efficient visible-light photocatalytic hydrogen production. RSC Adv. 4: 52332–52337. 16. Debadrito D, Animesh K.D, Divya V. K, Bapi G, Ankita P, Sudha G, et al. (2017) Assessment of photo- catalytic potentiality and determination of ecotoxicity (using plant model for better environmental appli- cability) of synthesized copper, copper oxide and copper-doped zinc oxide nanoparticles. PLoS ONE 12: e0182823. https://doi.org/10.1371/journal.pone.0182823 PMID: 28796823 17. Prateek K, Anupriya S, Sankalp V, Anshu B, Amit K.S, Kumud M.T, et al. 2018) Sunlight-Induced Selec- tive Photocatalytic Degradation of Methylene Blue in Bacterial Culture by Pollutant Soot Derived Non- toxic Graphene Nanosheets. ACS Sustainable Chem Eng. 6: 579–589. 18. Amir N, Serena M, Sindu S, Ebrahim M, Roholah S, Akbar K, et al. (2017) Nanostructured Fibrous Membranes with Rose Spike-Like Architecture. Nano Lett. 17: 6235–6240. https://doi.org/10.1021/acs. nanolett.7b02929 PMID: 28819978 19. Li G, Yi Z, Bai Y, Zhang W, Zhang H (2012) Anisotropy in Photocatalytic Oxidization Activity of NaNbO3 Photocatalyst. Dalton Trans. 41: 10194–10198. https://doi.org/10.1039/c2dt30593c PMID: 22669429 20. Shi H, Li X, Wang D, Yuan Y, Zou Z, Ye J (2009) NaNbO3 Nanostructures: Facile Synthesis, Characteri- zation, and Their Photocatalytic Properties. Catal Lett. 132: 205–212. 21. Wang X, Chen G, Zhou C, Yu Y, Wang G (2012) N–Doped Nb2O5 Sensitized by Carbon Nitride Polymer − Synthesis and High Photocatalytic Activity under Visible Light. Eur J Inorg Chem. 2012: 1742–1749. 22. Camargo E.R, Popa M, Kakihana M (2002) Sodium niobate (NaNbO3) powders synthesized by a wet- chemical method using a water-soluble malic acid complex. Chem Mater. 14: 2365–2368. 23. Shiratori Y, Magrez A, Dornseiffer J, Haegel F.H, Pithan C, Waser R (2005) Polymorphism in micro-, submicro-, and nanocrystalline NaNbO3. J Phys Chem B 109: 20122–20130. https://doi.org/10.1021/ jp052974p PMID: 16853601 24. Fan M.S, Hu B, Yan X, Song C.J, Chen T.J, Feng Y, et al. (2015) Excellent visible-light-driven photoca- talytic performance of Cu2O sensitized NaNbO3 heterostructures. New J Chem. 39: 6171–6177. 25. Song C.J, Fan M.S, Hu B, Chen T.J, Wang L.P, Shi W.D (2015) Synthesis of a g-C3N4-sensitized and NaNbO3-substrated II-type heterojunction with enhanced photocatalytic degradation activity. CrystEng- Comm. 17: 4575–4583. 26. Liu J.W, Chen G, Li Z.H, Zhang Z.G (2007) Hydrothermal synthesis and photocatalytic properties of ATaO3 and ANbO3 (A = Na and K). Int J Hydrog Energy 32: 2269–2272. Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 12 / 13 https://doi.org/10.1021/ja312653y http://www.ncbi.nlm.nih.gov/pubmed/23437875 http://www.ncbi.nlm.nih.gov/pubmed/9804547 https://doi.org/10.1371/journal.pone.0182823 http://www.ncbi.nlm.nih.gov/pubmed/28796823 https://doi.org/10.1021/acs.nanolett.7b02929 https://doi.org/10.1021/acs.nanolett.7b02929 http://www.ncbi.nlm.nih.gov/pubmed/28819978 https://doi.org/10.1039/c2dt30593c http://www.ncbi.nlm.nih.gov/pubmed/22669429 https://doi.org/10.1021/jp052974p https://doi.org/10.1021/jp052974p http://www.ncbi.nlm.nih.gov/pubmed/16853601 https://doi.org/10.1371/journal.pone.0204061 27. Shi H, Li X, Wang D, Yuan Y, Zou Z, Ye J (2009) NaNbO3 Nanostructures: Facile synthesis, characteri- zation, and their photocatalytic properties. Catal Lett. 132: 205–212. 28. Jiang L, Zhang Y, Qiub Y, Yi Z (2014) Improved photocatalytic activity by utilizing the internal electric field of polar semiconductors: a case study of self-assembled NaNbO3 oriented nanostructures. RSC Adv 4: 3165–3170. 29. Shi H.F, Wang T.Z, Chen J, Zhu C, Ye J.H, Zou Z.G (2011) Photoreduction of Carbon Dioxide Over NaNbO3Nanostructured Photocatalysts. Catal Lett. 141: 525–530. 30. Li P, Ouyang S, Xi G, Kako T, Ye J.H (2012) The effects of crystal structure and electronic structure on photocatalytic H2 evolution and CO2 reduction over two phases of perovskite-structured NaNbO3. J Phys Chem C 116: 7621–7628. 31. Shi H, Chen G, Zhang C, Zou Z (2014) Polymeric g-C3N4 coupled with NaNbO3 nanowires toward enhanced photocatalytic reduction of CO2 into renewable fuel. ACS Catal. 4: 3637–3643. 32. Li G.Q (2010) Photocatalytic properties of NaNbO3 and Na0.6Ag0.4NbO3 synthesized by polymerized complex method. Mater Chem Phys. 121: 42–46. 33. Li G, Kako T, Wang D, Zou Z, Ye J (2008) Synthesis and enhanced photocatalytic activity of NaNbO3 prepared by hydrothermal and polymerized complex methods. J Phys Chem Solids 69: 2487–2491. 34. Guan M, Zhu G, Shang T, Xu Z, Sun J, Zhou Q (2012) PVP-mediated synthesis of MPO4 (M = Y, Er) hollow mesocrystal cubes via a ripening process. CrystEngComm. 14: 6540–6547. Sodium niobate nanocubes for photocatalytic and biomedical applications PLOS ONE | https://doi.org/10.1371/journal.pone.0204061 September 14, 2018 13 / 13 https://doi.org/10.1371/journal.pone.0204061