An Artificial Biomimetic Catalysis Converting CO2 to Green Fuels NANO NEWS & VIEWS Open Access An Artificial Biomimetic Catalysis Converting CO2 to Green Fuels Caihong Li and Zhiming Wang* Abstract Researchers devote to design catalytic systems with higher activity, selectivity, and stability ideally based on cheap and earth-abundant elements to reduce CO2 to value-added hydrocarbon fuels under mild conditions driven by visible light. This may offer profound inspirations on that. A bi-functional molecular iron catalyst designed could not only catalyze two-electron reduction from CO2 to CO but also further convert CO to CH4 with a high selectivity of 82% stably over several days. Keywords: Molecular iron catalyst, CO2, CO, CH4, Visible light Background Social development and the energy crisis have increased the demand on chemical fuels. Furthermore, the increas- ing concentrations of CO2 in the atmosphere owing to human activities such as excessive combustion of fossil fuel, exhaust gas emission and respiration have had a series of terrible impacts including global warming, desertification, and sea level rise. One of the greatest innovations in mitigation of energy crisis and green- house effect was converting greenhouse gases CO2 into fuel chemical feedstock compounds such as CH4, CO, and other small molecules with visible light (it is called photoreduction, in scientific jargon) [1]. The most re- markable superiority of photoreduction is that it can be driven by visible light compared to electroreduction which is activated by applied voltage or thermal reduc- tion with high temperature. In addition, approximately half of solar light is located in the visible range. How- ever, the low production rate and selectivity because of multiple reaction pathways and a variety of products se- verely limit large-scale practical application of CO2 reduction. The challenges in catalytic reduction of CO2 to value- added fuels ideally based on cheap and earth-abundant elements rather than on precious metals are efficiency, stability, and selectivity [2]. So far, the main methods ad- dressing these challenges have fallen into three categories: screening transition metals [3] with high catalytic activity as active sites such as Fe, Co, and Ni; formation of organic macrocyclic structures to enhance long-term stability [4]; and ligand modification [5] to strengthen the desired prod- uct selectivity. In each approach, the selected metal element and the structural design both contribute to the final cata- lytic performance and product selectivity. Organic macrocyclic structures (OMS) chaining transi- tion metal elements are very popular catalysts used in CO2 reduction, where the metal elements act as catalytic active sites to adsorb and bind the CO2 molecules [6]. Microporous OMS can offer larger specific surface area, i.e., more active sites to support catalytic reactions. Nevertheless, the original OMS may not possess the optimized catalytic performance. Structure optimization such as ligand modification would improve the catalytic activity especially product selectivity by inducing internal interactions like H bonds which can stabilize the specific intermediates in favor of gaining desired products. Experimental Inspired from the photosynthesis of plants, Rao et al. [7] creatively designed a biomimetic photocatalytic system based on a molecular iron catalyst which miraculously produced CH4 from CO2 at ambient temperature and pressure. Such a frontier and significant discovery was published in Nature. Rao and co-workers judiciously designed an iron (transition metal element) tetraphenylporphyrin (organic macrocyclic structure) complex functionalized with trimethylammonio * Correspondence: zhmwang@gmail.com The Institute of Fundamental and Frontier Science, University of Electronic Science and Technology of China, Chengdu 610051, China © The Author(s). 2017 Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. Li and Wang Nanoscale Research Letters (2017) 12:530 DOI 10.1186/s11671-017-2293-4 http://crossmark.crossref.org/dialog/?doi=10.1186/s11671-017-2293-4&domain=pdf mailto:zhmwang@gmail.com http://creativecommons.org/licenses/by/4.0/ groups (ligand modification) as the catalyst to reduce CO2. This catalytic system was operated in a CO2-saturated aceto- nitrile (CH3CN) solution containing a visible-light photosensi- tizer aiming to capture photons from light irradiation and afford energy (hυ) for the redox reactions as well as a sacrificial electron donor used to provide electrons on photo-induced command by photosensitizer to reduce CO2. The whole sys- tem was significantly stable and driven by visible light (λ > 420 nm) at 1 atm and room temperature. Discussion Furthermore, Rao et al. first reported that the above catalytic system whose catalyst was known as the most efficient and selective molecular electro-catalyst for re- ducing CO2 to CO in two-electron process, could also be applied for the eight-electron reduction [8] from CO2 to CH4. They found an entirely new function of this mo- lecular iron catalyst under moderate conditions. Mean- while the authors analyzed and verified the reaction mechanism of two-step procedure that first reduced CO2 to CO and then converted CO to CH4 with 82% of the CH4 selectivity by isotope labeling experiments and blank experiments for the first time. Besides, they also found that a meta-acid condition could play a role of proton donor as well as H bond donor towards stabi- lized intermediates [7, 9] but unwished by-product hydrogen selectivity would increase either. Greenhouse gas CO2 molecules were adsorbed on the surface of catalyst or more precisely on the metal Fe active sites and distorted from the linear structure to a certain angle; thus CO2 molecules were activated [10] and formed Fe–CO2 adduct. In addition, this adduct was further protonated reacting with H+ from solution and formed Fe–CO adduct dehydrating a H2O molecule. The intermediates of CO could be obtained through hy- drogenation at this time. Then, CO molecules were bound to the metal active sites again through subse- quent multistep protonation and electron transfer process and proceeded to yield CH4 gas eventually deso- rbing from the catalyst surface. Later, this catalyst reused to next catalytic cycle of CO2 molecules (Fig. 1). Conclusions The catalytic system they designed was bi-functional, for catalyzing not only relatively simple two-electron reduc- tion to CO but also eight-electron reduction to CH4 util- izing only one catalyst at very easily satisfied conditions. This was a profound progress because a catalyst can catalyze efficiently a certain reaction generally. The uplifting discovery of Rao et al. aroused great interest on photoreduction of CO2 to value-added CH4 and has inspired future efforts in this field. A drawback of this report is that the authors have not deciphered the reduc- tion mechanism in greater detail yet; otherwise, it will help to develop more efficient catalytic system improved from mechanism aspects. Cheaper gas fuel may be pro- duced when the productive rate is improved via optimization of structure and conditions. The catalytic system designed by Rao et al. has other promising properties besides these described here. For example, it can convert toxic gas CO to green fuel CH4 just by light irradiation. Such a simple but significant conversion might guide a new craze to turn waste into wealth environmentally and efficiently. The application and development of their discovery might form the basis of a new branch of CO2 photoreduction or toxic gas conversion. Acknowledgements The authors greatly acknowledge the financial support from the National Basic Research Program (973) of China (2013CB933301) and National Natural Science Foundation of China 51272038. Authors’ Contributions CL investigated and reviewed relevant papers and then finished this article. ZHW has guided and corrected this work. All authors read and approved the final manuscript. Competing Interests The authors declare that they have no competing interests. Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Received: 10 August 2017 Accepted: 25 August 2017 References 1. Aresta M, Dibenedetto A, Angelini A (2014) Catalysis for the valorization of exhaust carbon: from CO2 to chemicals, materials, and fuels. Technological use of CO2. Chem Rev 114:1709–1742 Fig. 1 A sketch map of photoreduction from CO2 to CH4 Li and Wang Nanoscale Research Letters (2017) 12:530 Page 2 of 3 2. Kornienko N, Zhao Y, Kiley CS, Zhu C, Kim D, Lin S, Chang CJ, Yaghi OM, Yang P (2015) Metal-organic frameworks for electrocatalytic reduction of carbon dioxide. J Am Chem Soc 137:14129–14135 3. Cokoja M, Bruckmeier C, Rieger B, Herrmann WA, Kühn FE (2011) Transformation of carbon dioxide with homogeneous transition-metal catalysts: a molecular solution to a global challenge? Angew Chem Int Edit 50:8510–8537 4. Rao H, Bonin J, Robert M (2017) Non-sensitized selective photochemical reduction of CO2 to CO under visible light with an iron molecular catalyst. Chem Commun 53:2830–2833 5. Morris AJ, Meyer GJ, Fujita E (2009) Molecular approaches to the photocatalytic reduction of carbon dioxide for solar fuels. Accounts Of Chem Res 42:1983–1994 6. Chang X, Wang T, Gong J (2016) CO2 photo-reduction: insights into CO2 activation and reaction on surfaces of photocatalysts. Energy Environ Sci 9: 2177–2196 7. Rao H, Schmidt LC, Bonin J, Robert M (2017) Visible-light-driven methane formation from CO2 with a molecular iron catalyst. Nature 548:74–77 8. Xie S, Wang Y, Zhang Q, Deng W, Wang Y (2014) MgO- and pt-promoted TiO2 as an efficient photocatalyst for the preferential reduction of carbon dioxide in the presence of water. ACS Catal 4:3644–3653 9. Costentin C, Passard G, Robert M, Saveant J-M (2014) Pendant Acid-Base Groups in Molecular Catalysts: H-Bond Promoters or Proton Relays? Mechanisms of the Conversion of CO2 to CO by Electrogenerated Iron(0)Porphyrins Bearing Prepositioned Phenol Functionalities. J Am Chem Soc 136:11821-11829. 10. Neatu S, Antonio Macia-Agullo J, Concepcion P, Garcia H (2014) Gold- Copper Nanoalloys Supported on TiO2 as Photocatalysts for CO2 Reduction by Water. J Am Chem Soc 136:15969-15976. Li and Wang Nanoscale Research Letters (2017) 12:530 Page 3 of 3 Abstract Background Experimental Discussion Conclusions Authors’ Contributions Competing Interests Publisher’s Note References