This may be the author’s version of a work that was submitted/accepted for publication in the following source: Motta, Nunzio (2012) Nanostructures for sensors, electronics, energy and environment [Edito- rial]. Beilstein Journal of Nanotechnology, 3, pp. 351-352. This file was downloaded from: https://eprints.qut.edu.au/48640/ c© Consult author(s) regarding copyright matters This work is covered by copyright. Unless the document is being made available under a Creative Commons Licence, you must assume that re-use is limited to personal use and that permission from the copyright owner must be obtained for all other uses. If the docu- ment is available under a Creative Commons License (or other specified license) then refer to the Licence for details of permitted re-use. It is a condition of access that users recog- nise and abide by the legal requirements associated with these rights. If you believe that this work infringes copyright please provide details by email to qut.copyright@qut.edu.au Notice: Please note that this document may not be the Version of Record (i.e. published version) of the work. Author manuscript versions (as Sub- mitted for peer review or as Accepted for publication after peer review) can be identified by an absence of publisher branding and/or typeset appear- ance. If there is any doubt, please refer to the published source. https://doi.org/10.3762/bjnano.3.40 https://eprints.qut.edu.au/view/person/Motta,_Nunzio.html https://eprints.qut.edu.au/48640/ https://doi.org/10.3762/bjnano.3.40 351 Nanostructures for sensors, electronics, energy and environment Nunzio Motta Editorial Open Access Address: School of Chemistry, Physics & Mechanical Engineering, Queensland University of Technology, Brisbane, 4001, Australia Email: Nunzio Motta - n.motta@qut.edu.au Beilstein J. Nanotechnol. 2012, 3, 351–352. doi:10.3762/bjnano.3.40 Received: 03 April 2012 Accepted: 27 April 2012 Published: 02 May 2012 This article is part of the Thematic Series "Nanostructures for sensors, electronics, energy and environment". Editor-in-Chief: T. Schimmel © 2012 Motta; licensee Beilstein-Institut. License and terms: see end of document. 351 The areas of nanoscale science and technology are rapidly emerging, with a focus on the design, fabrication, and character- ization of functional objects on the scale of several nanometers. The implications of the new advances in this field are expected to reach far and wide, spanning a variety of scientific and engi- neering disciplines. Nanoscale science is growing evermore important on a global scale and is widely seen as playing an integral part in the growth of future world economies. We are all committed to leaving behind a better world for future generations, and nanotechnology can definitely help to improve our environment in several ways. The daunting energy crisis we are facing could be solved not only by new and improved ways of getting energy directly from the sun, but also by saving power thanks to advancements in electronics and sensors. New, cheap dye-sensitized and polymer solar cells hold the promise of environmentally friendly and simple production methods, along with mechanical flexibility and low weight, matching the conditions for a widespread deployment of this technology. Their often-criticized scarce efficiency is rapidly growing, thanks to the discovery of new dyes and polymers, which are the fruit of teamwork between chemists, physicists and engineers, all working at the nanoscale. Cheap sensors based on nanomaterials can make a fundamental contribution to the reduction of greenhouse gas emissions, allowing the creation of large sensor networks to monitor coun- tries and cities, improving our quality of life. Nanowires and nano-platelets of metal oxides are at the forefront of the research to improve sensitivity and reduce the power consump- tion in gas sensors. Nanoelectronics is the next step in the electronic roadmap, with many devices currently in production already containing components smaller than 100 nm. Molecules [1,2] and conduct- ing polymers [3] are at the forefront of this research with the goal of reducing component size through the use of cheap and environmentally friendly production methods. This, and the coming steps that will eventually bring the individual circuit element close to the ultimate limit of the atomic level, are expected to deliver better devices with reduced power consump- http://www.beilstein-journals.org/bjnano/about/openAccess.htm mailto:n.motta@qut.edu.au http://dx.doi.org/10.3762%2Fbjnano.3.40 Beilstein J. Nanotechnol. 2012, 3, 351–352. 352 tion. In this respect the present Thematic Series is an interest- ing follow-up to the series “Transport through molecular junc- tions” published in the Beilstein Journal of Nanotechnology in 2011 [1]. Many of these advances have been possible thanks to the discovery of new aggregation forms of materials at the nanoscale, such as fullerenes, nanotubes, graphene [4] and other carbon structures, or new organic–inorganic mixtures with unexpected properties, discussed also in the series “Organic–inorganic nanosystems” edited by Paul Ziemann [5]. Last but not least, we need to acknowledge that the ability to study these incredible aggregation forms of materials with atomic resolution is mainly due to the developments in scan- ning probe microscopy [6,7] that have occurred over the last 20 years. The Beilstein Journal of Nanotechnology recently hosted the series “Scanning probe microscopy and related methods” edited by Ernst Meyer [6] and “Noncontact atomic force microscopy” edited by Udo Schwarz [7] to which the interested reader is directed for more information. Science always holds surprises, and I am delighted to present this Thematic Series, giving a quick glance at the science and application of nanostructures. Nunzio Motta Brisbane, April 2012 References 1. van Ruitenbeek, J. M. Beilstein J. Nanotechnol. 2011, 2, 691–692. doi:10.3762/bjnano.2.74 2. Glatzel, T.; Zimmerli, L.; Kawai, S.; Meyer, E.; Fendt, L.-A.; Diederich, F. Beilstein J. Nanotechnol. 2011, 2, 34–39. doi:10.3762/bjnano.2.4 3. Mena-Osteritz, E.; Urdanpilleta, M.; El-Hosseiny, E.; Koslowski, B.; Ziemann, P.; Bäuerle, P. Beilstein J. Nanotechnol. 2011, 2, 802–808. doi:10.3762/bjnano.2.88 4. Held, C.; Seyller, T.; Bennewitz, R. Beilstein J. Nanotechnol. 2012, 3, 179–185. doi:10.3762/bjnano.3.19 5. Ziemann, P. Beilstein J. Nanotechnol. 2011, 2, 363–364. doi:10.3762/bjnano.2.41 6. Meyer, E. Beilstein J. Nanotechnol. 2010, 1, 155–157. doi:10.3762/bjnano.1.18 7. Schwarz, U. D. Beilstein J. Nanotechnol. 2012, 3, 172–173. doi:10.3762/bjnano.3.17 License and Terms This is an Open Access article under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The license is subject to the Beilstein Journal of Nanotechnology terms and conditions: (http://www.beilstein-journals.org/bjnano) The definitive version of this article is the electronic one which can be found at: doi:10.3762/bjnano.3.40 http://dx.doi.org/10.3762%2Fbjnano.2.74 http://dx.doi.org/10.3762%2Fbjnano.2.4 http://dx.doi.org/10.3762%2Fbjnano.2.88 http://dx.doi.org/10.3762%2Fbjnano.3.19 http://dx.doi.org/10.3762%2Fbjnano.2.41 http://dx.doi.org/10.3762%2Fbjnano.1.18 http://dx.doi.org/10.3762%2Fbjnano.3.17 http://creativecommons.org/licenses/by/2.0 http://www.beilstein-journals.org/bjnano http://dx.doi.org/10.3762%2Fbjnano.3.40 References