Audio Technica AT2020 Skip to main content Log in Register Subscribe Shop Help 0 items Search SOUND ON SOUND Home About Advertise Contact Information Readers' Ads Glossary Videos Tutorials Podcasts Search News Latest All News Podcasts Search Forum Latest posts FAQ Members Rules Search Glossary Magazine Latest issue Subscribe Advertise Publication Dates Write for SOS Search All issues Reviews Articles Podcasts Search Techniques Articles Series Tutorials Podcasts Search People Articles Podcasts Search Sound Advice Articles Tutorials Podcasts Search Music Business Articles Podcasts Search You are here Home Reviews Audio Technica AT2020 Condenser Microphone Microphones / Miking By Paul White Published February 2006 Audio-Technica's new entry-level mic puts in a star performance. Audio-Technica's new AT2020 is unashamedly a 'no frills' mic, with basic standmount and a soft zip-up vinyl case. The polar pattern is a fixed cardioid, and there are no switches for pads or filters. Slightly smaller than Audio-technica's other side-entry vocal mics, the casing contains a 16mm-diameter back-electret capsule, which is slightly smaller than the usual one-inch-diameter capsules adopted by most microphone designs of this type. It's a mistake to imagine that smaller diaphragms equate to a less warm or solid sound, though, and this model offers plenty of bass extension, with a full 20Hz-20kHz bandwidth with only a slight dip centred around 70Hz and a very gentle presence hump between 5kHz and 15kHz. It's also wrong to think of back-electret capsules as somehow being second-class citizens, as many top measurement mics are back-electrets, for example. Photo: Mark Ewing This microphone is extremely solid, weighing in at 12.1oz — so solid in fact that I couldn't find a way into it to take a peek at the electronics! The cast metal is quite thick and chunky, and a tough wire mesh protects and screens the capsule. A secondary layer of finer mesh helps reduce popping but, as always, you should still use a proper external pop shield when recording vocals. The open-circuit sensitivity of the mic is 14.1mV/Pa, which is comparable with other studio vocal mics, though the quoted noise figure is just slightly on the high side of average at 20dB. The maximum SPL is a hefty 144dBSPL at 1kHz for one percent THD, so there's no worry about very loud sounds such as close-miked horns. This equates to a dynamic range of 124dB at 1kHz and maximum SPL. Phantom power is required, and there are no battery options. Studio Tests Despite its low cost, this mic actually delivers a very mature, believable sound both on vocals and on instruments. As a vocal mic, it displays the kind of lower mid-range warmth that flatters most singers, and combines this with a very subtle presence peak that adds 'air' and clarity without erring on the side of sibilance or harshness. Because the mic doesn't hype the character of the original sound too much, it's more likely to work well with a wide range of singers. Although the noise figure isn't brilliant by today's standards, noise isn't an issue when close-miking voices or instruments. I don't for a moment imagine that Audio-Technica would recommend this mic for recording classical instruments from several metres away, but you might still get away with it if the performance is reasonably loud. Tested on acoustic guitar, the mic immediately gave a well-balanced sound, and it was very easy to find a sweet spot where the acoustic sound of the guitar resembled the miked sound. There's plenty of depth and clarity, but without that scratchy honkiness that some mics seem to lean towards. I was also impressed with the off-axis characteristics of this mic, with its exceptionally good rear-axis rejection and good rejection of sounds arriving from 90 degrees off axis. This could be good news when working in studios with computers, as keeping the computer noise out of the microphones can be a major headache. Final Impressions As a low-cost, general-purpose capacitor microphone, the AT2020 is hard to fault other than on account of its noise level. I particularly liked the well-balanced sound this microphone produced, both on voice and on acoustic guitar. It's also a pity the mic doesn't come with a shockmount, but I can understand that Audio-Technica wanted to keep the price as keen as possible, and the included standmount works fine. Clearly Audio-Technica aren't without some stiff competition, but they have a reputation for good engineering and good-sounding mics, and a bit of reputation goes a long way when you're trying to choose between similarly priced microphones. The AT2020 is built to the same standard as Audio-Technica's more up-market microphones, and I certainly have no complaints about its subjective sound quality. Indeed, for some applications in turns in better results than microphones costing several times its UK price, so it probably doesn't take a crystal ball to predict that Audio-Technica will sell a lot of these over the coming months.  Pros Inexpensive. Well engineered. Good sound on vocals and instruments. Cons Noise level slightly higher than average. Summary This is a great-sounding little mic that can deliver very professional results in just about any home-studio miking application. information £99.95 including VAT. Audio-Technica UK +44 (0)113 277 1441. +44 (0)113 270 4836. sales@audio- technica.co.uk www.audio- technica.co.uk www.audio- technica.co.jp Published February 2006 Previous articleNext article In this article... Introduction Studio Tests Final Impressions SOS Competitions Win! GIK Acoustics Impression Room Kit WIN award-winning Aston Microphones Element mic Readers' Ads View all ads Create free ad On the same subject Melodium 42Bn May 2021 Shure MV7 May 2021 Golden Gear: AKG D19 May 2021 Q. What mic polar pattern is best for recording speech? May 2021 Warm Audio WA‑87 R2 May 2021 From the same manufacturer Choosing A USB Microphone | Audio Examples June 2020 Audio-Technica ATM350GL June 2020 Q. How should you pan vocals when double-tracking? March 2020 Audio-Technica ATH M60x March 2019 Audio-Technica 3000 Series February 2019 Sign Up TO SOS Newsletters Latest Videos Bad Musicians Need Good Engineers 1 month 1 week ago. Using Phaser Effects 6 days 32 min ago. 100 Years Of The Theremin | Podcast 1 month 1 week ago. New forum posts Re: Correct tool to avoid clipping during "hands o... > Wonks > Tue Apr 27, 2021 5:45 pm Recording: Gear & Techniques Re: DDA D Series Manual and Schematics > Hugh Robjohns > Tue Apr 27, 2021 5:39 pm Recording: Gear & Techniques Re: Korg Triton Taktile 49 - problems using with a PC > Wonks > Tue Apr 27, 2021 5:38 pm Keyboards & Synthesis Re: Musician Bios: How to Not Ruin Your Career? > Petros_K > Tue Apr 27, 2021 5:30 pm Music Business Re: DDA D Series Manual and Schematics > Sam Spoons > Tue Apr 27, 2021 5:28 pm Recording: Gear & Techniques Recent topics Speaker - Amp Match  Correct tool to avoid clipping during "hands off t...  Why doesn't my bounce sound like my active mix?  DDA D Series Manual and Schematics  Korg Triton Taktile 49 - problems using with a PC  Musician Bios: How to Not Ruin Your Career?  Loft conversion studio/office  Luthier recommendations Essex (ish) area...  Remote Control of UAD Console - AT Last!  Please Recomend good headphones for mixing.  Recently active forums Mixing, Mastering & Post Production Recording: Gear & Techniques Keyboards & Synthesis Music Business DIY Electronics & Studio Design Guitar Technology Feedback New Products & Industry News Windows Music Mac Music Music Theory, Songwriting & Composition Live Sound & Performance Apps & Other Computers/OS Remote Collaboration User Reviews SOS Support Forum Useful Information Archive You may login with either your assigned username or your e-mail address. The password field is case sensitive. Request new password Create an account Contact Us Cookie Policy Help Privacy Policy Terms of Use        All contents copyright © SOS Publications Group and/or its licensors, 1985-2021. All rights reserved. The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers. Web site designed & maintained by PB Associates & SOS