id	author	title	date	pages	extension	mime	words	sentences	flesch	summary	cache	txt
41851	Rose, Augustus F. (Augustus Foster)	Copper Work: A Text Book for Teachers and Students in the Manual Arts			.txt	text/plain	12303	895	86	The equipment necessary for a start in Copper work need cost but little piece of metal called a washer, Figure 15 E, a little larger in diameter allowing enough metal in the center of the plate to form the handle sides are bent down over a block of wood or metal placed in the vise. borax and placing the solder at all corners before applying any heat. corner has been soldered and the box pickled, it is again placed over a The solder should be cut in small pieces and placed about the filed off level and soldered to a piece of metal, forming the top. placing the metal on the pitch, work a little of the pitch over the Place upon the annealing tray, Figure 1, the circular piece of metal iron or steel wire the size required and also a piece of copper; place	./cache/41851.txt	./txt/41851.txt